Please give a try like the following,
Xlite (Configure Net2Phone A/c) ---> Cisco ASA Firewall ---> Internet
cloud,
if the above works then there is no problem with your firewall, replace the
nat=yes and canreinvite=yes
otherwise you have to allow the ports 5060 (TCP), 5000 to 30000 (UDP) in
your router for the Asterisk IP (192.168.0.10)
Try this...
On Thu, Sep 23, 2010 at 7:33 PM, Alejandro Cabrera Obed
<aco1967 at gmail.com>wrote:
> Dear, I have this scenario:
>
> - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10
>
> - Behind a Cisco ASA firewall that connects to Internet
>
> - SIP trunk to Net2Phone with these parameters (nat=no):
>
> host=200.58.113.60
> username=DOLLY
> secret=123456
> port=5060
> type=peer
> dtmfmode=rfc2833
> disallow=all
> allow=alaw&ulaw
> nat=no
> canreinvite=no
> qualify=yes
>
> -Softphones Xlite
>
> The PBX can't register to Net2Phone, and no calls are made and this is
the
> log:
>
> -- Executing [s at macro-dialout-trunk:20]
NoOp("SIP/9004-00000008", "Dial
> failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE =
20")
> in new stack
> -- Executing [s at macro-dialout-trunk:21]
Goto("SIP/9004-00000008",
> "s-CHANUNAVAIL,1") in new stack
> -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
> -- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
> Set("SIP/9004-00000008", "RC=20") in new stack
> -- Executing [s-CHANUNAVAIL at macro-dialout-trunk:2]
> Goto("SIP/9004-00000008", "20,1") in new stack
> -- Goto (macro-dialout-trunk,20,1)
> -- Executing [20 at macro-dialout-trunk:1]
Goto("SIP/9004-00000008",
> "continue,1") in new stack
> -- Goto (macro-dialout-trunk,continue,1)
> -- Executing [continue at macro-dialout-trunk:1]
> GotoIf("SIP/9004-00000008", "1?noreport") in new stack
> -- Goto (macro-dialout-trunk,continue,3)
> -- Executing [continue at macro-dialout-trunk:3]
> NoOp("SIP/9004-00000008", "TRUNK Dial failed due to
CHANUNAVAIL HANGUPCAUSE:
> 20 - failing through to other trunks") in new stack
> -- Executing [continue at macro-dialout-trunk:4]
Set("SIP/9004-00000008",
> "CALLERID(number)=9004") in new stack
>
> What can be the problem please ???
>
> Thanks a lot
>
> Alejandro
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Thank you with regards,
Gopalakrishnan A.N,
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20100923/04709d45/attachment.htm