similar to: Asterisk 1.2.6 and 9133i

Hi, I have several aastra 9133i phones, which are connected to an asterisk 1.2.6 system. I have setup MWI on the phones to point to the IP of the asterisk server, but although there is a message waiting new in the mailbox, the phone's light does not light. Any thoughts?

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the

Thank you Melissa. I love the phone but the dial keypad is a little bouncy. I was hoping for a more solid feel like on the analog PT390's or my quality standard, the Nortel 9417CW. Other than the MWI problem, I'd like more documentation on the configuration paramters. I have found little online configuration documentation other than very basic stuff on the Sayson website. I'd

Hi ! Sorry if this is a long post... I had this setup for about a year without problems : Network A <-> wrv200 <-> internet <-> wrv200 <-> net b The 2 networks are linked with an ipsec vpn. The 2 internet connections are with the same cable company to minimize latency, both separates /24 subnets. On network A, I got 2 computers, a single sip phone (aastra

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Hi, I'm a Polycom user who have just been trying out the Aastra phones. I`ve run into a bit of an issue. I cannot configure the voicemail dialout correctly on one of the two phones I am using, even if the documentation seems to state that it should work in the same manner on both phones. I have both a 9143i and a 57i CT. I`ve set both up with provisioning from config files. Both

Hi, Does anyone have experience with Asterisk and the aastra 9112i or 9133i phones? I am looking at purchasing some, and was curious how quality, and stability was with them.

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Hello All, I have Polycom IP 500 phones which I would like to have message waiting indicators on. So far, I have my system running well but the problem I am seeing is that MWI doesn't seem to tell my phone that it should display a MWI state. The light does not show when you have message nor is there any indicator on the text lines of a message waiting. The wiki doesn't cover this

MessageMelissa - I added the "fromuser=AnyName" to my sip.conf file stations and that, in fact, corrected the problem. The MWI now works flawlessly. I would recommend that Aastra/Sayson pursue this with the Asterisk team so that it is listed as a known issue or to have Asterisk patched to fix it. I will submit a bug on it as well. I'm copying the Users Mailing List on this. For

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721

Ok, So I just installed some aastra 9133i phones. They work great. One small problem. When I do an 'all page' anyone who is on the phone gets their call placed on hold for the duration of the page! THIS IS NOT GOOD! How do I make the page only go to people who are not on the phone, and ignore people who are on the phone?

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release

I am still a little confused about how to activate MWI with PJSIP on Asterisk 13.9.1. I use realtime for configuration. So far I have tried setting both the mailboxes field on ps_endpoints and the mailboxes field in ps_aors but I cannot get the indicator lamp to blink on any of my phones (Digium, Aastra and Yealink). I have tried just the number of the mailbox and also adding the context.

I am unable to get my 9133i to register with my asterisk server. I am including config files below, this a simple test network so there's nothing secret in the config files. I have upgraded the phone to the latest software version (1.4.3) I'm not sure what the problem is. I can call the phone from a softphone, but the 9133i says "no service" on the screen and I can't dial