similar to: Macro-hangupcall - has a Wait(5) - Ast@Home --- why?

Hi all, I've my Server running well, then sometimes Sjphones looses registry and it only works well again if i restart the pc running sjphone. Has any one experience this? Best regards, Marco Mouta

Hi all, I would like to hear from you, SjPhone has the option to Do not Send silence (audio options, advanced), should i use this or remove this option? Everything ran well until now, but there was few people on my server, i'm increasing sip extensions and i want to avoid complains from the users:) Best regards, Marco Mouta

Hello, Currenly I've ASterik@Home 1.5 running on DMZ. I can register SJphone there, good audio on 8200 (webmeet me calls) and i also can dial Zapata extensions. When I dial sip phone extensions nothing happens if the client that i'm calling is registred, if the client has voicemail it goes to voicemail. IMPORTANT: I get this error message on my Check Point Firewall: "sip

hi all i have an asterisk working and i need to add a mettme public service. for example i need to download a soft (sjphone) and without any configuration call to 509@asterisk.mydomain.com (meetme) and join a conference but when i do that i received an error saying nomber do not exist. but if i call a extension is work propperly. in the extensions.conf have exten => 411,1,Answer exten

Hello, This is my first asterisk installation, and having read up on the documentation, and trying several tutorials i'm unable to get my outbound route working. I'm certain it's an issue with my configuration and my inexperience with asterisk. So i have my POTS phone connected to my digium card, and when i make a call, I receive the "cannot be completed as dialed" message.

Hello, My client customers complaining that their calls suddenly get hung-up, I am just investigating if the problem from my side, I had a log of a hang-up case, Does it help to know if there is a problem that can be resolved from my side? elastix*CLI> -- Hungup 'IAX2/99999-6813' == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on

I am having problems sending and receiving calls over the T1. They never seem to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no errors on the line. Any ideas on what is wrong? I have tried a variety of fxsks and fxoks configurations without avail. This is a single asterisk@home system with a single T1 card. Robbed Bit T1 ami, d4. ------------------inbound call

Just installed V 0.4 of asterisk@home Programmed up 3 sip budgetone extensions, they call call each other fine. Tried to dial '9' for an outside line through an X100P to a packet8 ATA but got 'all circuits are busy now'. Here is the console output. == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-8d25' -- Executing

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

For a new project, I have written a dialplan and it is pretty straight forward: The [dialout] context dials out a number, and h extension in this context writes the CDR. But what is happening is that if the callee hangs up first, all values in the CDR are fine, but if the caller hangs up first, the 'dst' column is always 'h'. I put a NoOp right in the begining of this macro to

I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like it should bee useful for something! I'm perfectly happy to do my homework, but also don't feel thee need to reinvent the wheel! So, links with relevant info would be appreciated. If there is a config for a 2621 being used as a gateway

Hi list I'm kinda new to asterisk and I'm woriking for a company that sells Asterisk solutions and appliances. I installed TrixBox on a litle PC @ home and a x100p card which is recognized as a Zaptel card, I made some in/outbound routes and they seem to work but I have a problem with SIP softphones. I created 2 estensions 1000 and 1001 they're both in different cities, when I 1000

Hello, I have setup the n-way conferencing with Asterisk and it's working when I use with my budgetone 100 phone but it doesn't work for any of the voip software or other ATA that I have. When I turned the debug on, I see that the correct keys (*0) were entered but asterisk doesn't detect the signal to trigger the features event. I have set a test extension to get the input dtmf key

I have this code which was taken from the phpagi project page along with the following in extensions_conf and the output from the asterisk CLI. When I call the 311 extension, I does nothing then hangs up. What am I doing wrong?? ----php code------------ #!/usr/local/bin/php -q <?php set_time_limit(30); require('phpagi.php'); $agi = new AGI(); $agi->answer(); $cid =

[also posted on Trixbox trunk forum] I am also working with Sangoma directly to debug this, but so far no real luck. TrixBox 2.6.1, A102d card with V33 firmware (latest) and WANPIPE 3.2.6 (3.2.7 is out, but nothing has changed that would affect this problem). The system gets about 200 calls inbound on the trunk, which is not very heavily used, and of those calls one or two a day is randomly

---------- Forwarded message ---------- From: Marco Mouta <marco.mouta@gmail.com> Date: Feb 15, 2006 1:58 PM Subject: Which ATA device do you recommend? To: asterisk-users-request@lists.digium.com Hello, I'm developing a Voip Solution for a client, which ATA SIP do you recommend? there are some ATA devices fully tested with Asterisk? I hope that Asterisk experient users could give me

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

Hello all, I'm tring to retrieve a formula to calculate a MOS value from Asterisk RTCP stats... Have you got any idea how to do it? Thanks I'm reading all G.107 ITU docs to retrieve something... I'm saving the SIP RTCP stats with: [macro-hangupcall] exten => s,1,Set(CDR(userfield)=${CHANNEL(rtpqos|audio|all)}) exten => s,n,ResetCDR(vw) exten => s,n,NoCDR() So I retrieve

Hi all, I've around 10 people on my network getting this error, Critical transaction failed: Client non-INVITE transaction[trying]: Time out I'm using Asterisk 1.2.5 and Sjphone. Any tips??? Best regards, Marco Mouta

I am having a problem with SJphone registration, having read the list and wathced it for a while for similar problems. I just can't seem to figure out the problem. I tryed to follow a tutorial from http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+sjphone, but in SJphone (SIP tab), I can't find the following setting. Use local outbound proxy - checked. Proxy IP Address: