similar to: Aastra Questions

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

I have been struggling with this issue for about a year now. There were just too many IP phones to choose from at all sorts of price points and not enough information about any of them. Now I am looking at the situation again and if anything it has gotten worse. There are even more phones and all sorts of opinions. For every person that says phone x is great there is someone else complaining

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

Hi, I just purchased a 9331i phone. It's great! However, having a slight issue with line 2 and 3. line 1 works fine. But when I try to make a call with line 2 or 3 I get a fast busy from the phone. Asterisk shows this: Mar 23 15:19:12 NOTICE[18185] chan_sip.c: Failed to authenticate user No User <sip:No%20User@mysipserver.myhost.com:5060>;tag=34c1cd2bf55cb8d Can anyone with a

Having scoured the web, I still am no better off .. I have 2 Aastra480i's , and 120+ cisco 7940's :) . I am trying to decide which model to use going forward when we purchase more kit. They both seem much on a par regarding features. Q1: Is there anyway of making the cisco auto-answer _without_ having to manually edit the configuration on each phone ? I've been able to get the

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated

Hello, I have some Aastra 9112i's in production that almost function flawlessly. The problem I'm having is when a caller is put on hold they do not hear hold music. If they are on hold for too long (~ a minute?) they are hung up on. All other phones including Aastra 480i and Sipura/Linksys ATAs all seem to be working fine. Is this a quirk anyone else has experienced? Any

I think one of the differences is: We do pay attention to Asterisk and this mailing list ;-) CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Joao Pereira Gesendet: Dienstag, 31. Oktober 2006 13:47 An: asterisk-users@lists.digium.com Betreff: [asterisk-users] Snom or Cisco Phones? Hello I need to

hi i've got an AAstra 9133i ip phone, when i've bought it, i've set it to use a SIP/400 account on my asterisk, then, i've changed settings and i've set set phone to use a SIP/500 account . now, when i connect the phone to tthe network, it register itself on asterisk with both accounts!!! -- Registered SIP '500' at 192.168.100.188 port 5060 expires 120 --

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

We have a new customer with a lot of old phones like the 9133i. They won't register, and we see some very strange behavior with them. If the SIP peer exists, they simply fail silently, with no error in the CLI or the messages log. Nothing works, but no errors. If the peer does not exist, it's clear that it's registering improperly: [2013-04-28 13:34:31] NOTICE[3058] chan_sip.c:

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

Hello list, I am doing some work for a non profit group. As part of this, I am going to be putting in a 30 handset Asterisk solution. We are trying to keep the costs down as much as possible, as this job includes cabling, I am looking at POE solutions. On the switch side, I am considering something like some Netgear ProSafe FS726TP 24 port switches, or maybe the equivalent Linksys SRW224MP 24

I need to buy some new phones for our own offices. I've used only Polycom phones until now, but I'd like to broaden my experience. I'm trying to decide which phones to experiment with. I have these options: - A combination of Polycom, Aastra and Snom - Just Polycom One the one hand, I'd like to keep things uniform, since it greatly simplifies provisioning. On the other hand, I

What hardphones support xml/html/xhmtl/microbrowser? I need an inexpensive SIP hardphone that can run simple applications (queue status, etc). The phones I know of: Aastra 480i, 9112i, 9133i (though limited by 3 LCD lines on the 91xx seems kind of silly) Cisco 79xx Mitel 5235 Polycom IP601 Any others? -Dan

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721