similar to: Re: transfers/parked calls + polycom 501

This is a dialpaln issue. I solved the same problem recently. For 4 digit extensions you need to append the dialplan statement in the sip.cfg configuration file as follows <digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2 -9]xxxT|1xxxT" dialplan.digitmap.timeOut="3"/> Michael > I am not sure what I did but blind transfers do not

Howdy - > The transer button on the polycom phone does not seem to transfer/park the > call properly. I have to use the # -> 700 to park the call. If I recall, using the Polycom transfer, you have to make sure it is done as a blind transfer. The Polycom attended transfer (default) option does not work. > Furthermore the # -> 700 only works on incomming calls. If I

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Hi Andrew - > On Monday 13 March 2006 10:20, Noah Miller wrote: >>> The transer button on the polycom phone does not seem to transfer/park >>> the call properly. I have to use the # -> 700 to park the call. >> >> If I recall, using the Polycom transfer, you have to make sure it is done >> as a blind transfer. The Polycom attended transfer

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk server but 'sip show peers' reports that the phone

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

hello, I try to set up two lines per ip 300 phone, registration is ok but i get Failure to authenticate 407 for subscribe. Anybody could help me to configure Asterisk in order to set instant message and presence ? I've tried with Ondo sip server it's ok ! Regards D?couvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Cr?ez votre Yahoo! Mail

I have the following situation: Asterisk 1.2.1 25+ Polycom 501 telephones. Bootrom 2.6.2.0032 Application 1.6.2.0041 Some 501's local to my network, some across the great INTERNET divide. PRI connected to Sangoma card. Issue: horrible echo (and squeals, and "underwater-like" sound) on speaker phone when calling from extension to extension. echo not present when calling outbound

I think Polycom has added another feature that nobody wants. With MWI configured, and a phonexxx.cfg that has this: <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="XXX" msg.mwi.2.subscribe=...> </msg> Under 1.3.4 and earlier, the phone would immediately

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 3261 bytes Desc: image001.jpg Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070420/b97b0852/attachment.jpeg

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

We are having an issue that I have been unable to figure out how to resolve. I think its related to the Polycom Phones and not the Asterisk configuration, but I'm not positive. We have several Polycom 500/501/601's on both a LAN and at employee homes. The problem we are having is if our internet connection goes down the Local LAN phones loose their connection to the Asterisk Server.

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns

I am getting to my wits end with these phones (and so is my boss). I am getting an random echo on these phones and I have an issue opened with Polycom and its been in their research and development department for almost a month with no results. I have noticed that I get a message "RFC3389 support incomplete. Turn off on client if possible" in asterisk. I have researched this and made

Hi all, I am working on building a new VoIP PBX. Looking at the current market for phones it seems my best "enterprise" options are the Cisco and Polycom phones. I have some experiance with the Cisco 7940G, but the process of flashing the phone with the SIP firmware left a bad taste in my mouth (not to mention the added expense for the phone). What is the general consensis about

Hi - We have a couple of large spaces that we'd like to cover with dedicated conference units like the Polycom Soundstation IP3000. We're concerned about adequately covering the spaces, though, one of which is very long and narrow. I wanted to get external add-on microphones for the IP3000, but I've found that unlike some of their other conference products, it does not have this

Hi - I've just been testing out the latest CVS HEAD (as of about 10:00a EDT today). I'm getting some weird errors. Calls from one sip phone to another have OK audio in one direction and highly scrambled audio in the other direction. The console shows this error repeated ad nauseum during each call: Jul 18 16:08:03 ERROR[22941]: utils.c:509 tvfix: warning negative timestamp

Greetings, Has anyone noticed that attempting to place a call from the "Placed Calls" list on a Polycom IP501 by pressing the 'Dial' softkey sometimes simply returns the phone to the idle screen? It is not related to the number being dialed, as we have observed two entries for the same number, one of which worked and the other didn't. We've experimented with calls