similar to: misdn

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

Hi all, I have a strange problem, regarding zap channels and cdr. I am using asterisk bristuffed version Asterisk 1.2.2-BRIstuffed-0.3.0-PRE-1i, Copyright (C) 1999 - 2006 Digium, Inc. and others. with two billion ISDN cards. I also installed asterisk addons, last stable version via cvs internal calls, or calls starting from internal sip or iax phone are recorded in the cdr all without any

Is it possible the cpu(s) are being taxed? If they are under heavy load (from another domain most likely) it may cause the domain to not respond to interrupts in a timely manner. If this is the case, you might try changing the scheduling weights of your domains (search the list). _____ From: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel BMC 450 it is connected to. The cli fills up with these: sig_pri.c: Ring requested on unconfigured channel 255/255 span 3 Is this likely to be a 1) config error 2) cable issue (I made them) 3) hardware problem with the Digium card 4) software (lib pri) Any clues?

Hi all, I am trying to add a TigerJet usb adapter to my asterisk installation I have the 1.2.4 asterisk bristuffed version, holding two zaphfc (ISDN) cards If I connect the TigerJet adapter to my linux box (Suse 10) i see: Bus 005 Device 001: ID 0000:0000 Bus 004 Device 003: ID 06e6:831c Tiger Jet Network, Inc. Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device

Hi, I have an IBM server running latest asterisk 1.4.x connected to a Siemens hi-path user a TE120P single-span. Approx every 8 hours (although not every 8 hours and sometimes 2 in a row) at exactly the same time I see the following errors Does anyone have any suggestions / ideas ? Thanks Ruairi Sep 24 11:56:30 asterisk01 -- MARK -- Sep 24 11:59:02 asterisk01 ntpd[3615]: synchronized to

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

Hi everyone I have a Digium card TE110P and after plug it, turn on the computer and configure, the LEDs don't light up in spite of what Digium FAQ says about the LEDs: When will the LED's light up on my TDM400P/TE110P/TE2XXP/TE4XXP? ... The TE110P LED's will light up RED when the span is configured and kernel module is loaded. If configured correctly and a circuit or channel bank is

Hi, I have a connection between a te120p and a siemens hipath which was recently set up. The connection uses etsi / e1 with no crc. Every few hours the asterisk shows the pri as in alarm asterisk01*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN and I have to run ztcfg to clear the alarms asterisk01*CLI> pri show span 1

I'm having trouble installing Beronet BN4S0 card. I have downloaded instructions from here http://www.beronet.com/download/card_installation_guide.pdf And when I download install-misdn-mqueue[1].tar.gz I untar it and execute "make" and "make install". This is the output that I get. [root@nbirma1 install-misdn-mqueue]# make install make -C app_bundle make[1]: Entering

Hi, I have an asterisk running great, with 2 cisco 7912 phones converted to SIP, and a cisco 2600 xl w/ E1 and SIP. I?m thinking to expand the test adding more 7912, but I prefer not convert all the 7912 to SIP, so I?m tying to put CHAN_SCCP to work. I?ve get the sources from cvs.sourceforge.net but when I try to compile, get the followings errors: [root@asterisk01 chan_sccp]# make Now

Hi, I' still fighting the problem, that I can talk from one SIP phone to another, but I can't hear the output of the playback or similar applications: exten => 202,1,ANSWER() exten => 202,2,PLAYBACK(tt-monkeys) exten => 202,3,HANGUP() When I dial 202, asterisk show the following on the cli: -- Executing [202 at local:1]

Hello, Using Ubuntu Server 12.04 and Asterisk 11.2.1. I'm getting the following error when trying to start asterisk: (Syslog) kernel: [ 1032.713864] asterisk[26918] trap invalid opcode ip:7fc272923076 sp:7fff928cf1b0 error:0 in codec_ilbc.so[7fc272921000+e000] We were running Asterisk on a physical box, but moved it to a virtual environment. That went fine. Asterisk started normally and

Hello, I'm trying to get the following situation. Someone calls an application on one of our asterisk server. In this application the caller will call a SIP client. (with the command Dial) The Sip client is connected with another asterisk server. (see below) Caller --> asterisk01 (incoming server) --> asterisk00 (outbound server) --> SIP client (X-lite) Do anybody now how

Hello all, Voisonics is pleased to introduce easySysAdmin, an automated support/security platform, designed to save your engineer's time and prevent hacking attempts and telecom fraud. It comprises of an online service run by us, and a lightweight and easy-to-install client on your side. Specifically of interest to Asterisk users is the monitoring of SIP registrations, and automatic blocking

Hi All, I am installing a Zaptel Quad E1 card with ISDN PRI in Brazil and I?m with this problem: Asterisk CLI : Mar 27 01:49:57 WARNING[2612]: chan_zap.c:7143 zt_pri_error: PRI: !! No channel map, no channel, and no ds1? W hat am I supposed to identify? Mar 27 01:49:57 WARNING[2612]: chan_zap.c:7143 zt_pri_error: PRI: !! Unable to add IE 'Channel Identification' == Restart

Hi, after I fixed my problem with the playback() application, I now have the next strange one. When I dial the number of our client, located in another town, I get a connection to the asterisk server, I can talk to my client or listen to his mailbox. If some in the town of this client calls him, he gets the ISDN error "service not available". Out office is connected to he office

I would like to know which kind of solutions are available, both software and hardware, for human operator in an asterisk environment. The operator should be able to provide the basic standard operation, like to transfer calls and to see if the extensions are busy or not and so on. Thanks in advance, Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.