similar to: Asterisk on MacOS?

Hi all , In my pbx ,there is no zaptel card ,so i loading ztdummy,but problem appear,when i dial the number into the pbx,sometimes i can not listen to the ivr ,and no rtp create. if i unload the ztdummy driver,the proble will disapper. I guess may be the timer source problem, but i dont't know how to solve it . anyone can give me some advices will be appreciated. asteirsk-1.4.21 and

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Hi all, Trying to build ztdummy on an old redhat 7.3 box running kernel 2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes, I set them up with make oldconfig; make dep. The build error is: make ztdummy gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/

Hi all, I hope everyone is doing well. I just joined the list, and I've really enjoyed all I have read about asterisk so far. Unfortunately, I'm having a bit of trouble implementing this thing :). By the way ... I did my best to search the forums, and also to use google extensively, and while I have found pages with people with the same problem, ... The fix suggested on those sites,

Has anyone received this message while attempting to do a MAKE INSTALL on ZAPTEL depmod: *** Unresolved symbols in /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o I am not running DEVFS so that's not the issue. Zaptel drivers/modules all load, but ztdummy won't /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: /lib/modules/2.4.26-gentoo-r9/misc/ztdummy.o: unresolved

Hi i followed this instructions for installing ztdummy on a 2.6 kernel (taken from http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy ) cd /usr/src/zaptel * READ /usr/src/zaptel/README.udev and follow the steps * check modules on: /etc/sysconfig/zaptel> if you have no digium hardware comment out all modeules except ztdummy. - make linux26 - make install -

Hi Everyone, I read through the list on the issues with the ztdummy driver which I need for MeetMe, but I seem to have come across a problem that I cannot seem to find an answer for. I am running Gentoo 2.6.10 on an Intel box. I have read the the wiki entries on the ztdummy and followed the instructions as they relate to the 2.6 kernel. Everything compiled great, but a modprobe ztdummy

Hi! When I try to load the ztdummy driver via "insmod ztdummy", I get the following errors: /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_register I'm using zaptel-1.0.8 and

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

Hi I run asterisk 1.4.2 with zaptel 1.4.1. Zaptel is only needed for the ztdummy driver to get the Meetme() application to work. I don't have any specific hardware. And it does work nicely. When I reboot the machine however I have to manually load the driver like this: [root@vink ~]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

Any thoughts on the following? I am running asterisk from CVS (downloaded yesterday's version, just to be sure) on a test system with no digium cards in it, so I have installed ztdummy (see logs and screenshots below) as a timing source. When I call the music on hold extension from a Sipura Sip connected analog phone, I hear nothing and start getting Warning[98310]: chan_sip.c:674

hi there i am facing problem in installing the ztdummy module in fedora7, 2.6.22.5-76.fc7 is the version of the kernel. here are some logs for your kind consideration, i have tried varios solution from voip-info.org and many more, but in vain. Message from "/var/log/messages" Sep 13 14:27:14 localhost kernel: Zapata Telephony Interface Registered on major Sep 13 14:27:14 localhost

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

I installed Asterisk on Gentoo using emerge. At first, emerge tried installing version 0.9 but reading the wiki showed how to get the latest stable. I'm running Gentoo kernel 2.6.11-gentoo-r9. Asterisk seems to be working just fine, but I'm concerned that since I don't have any Digium hardware, I may need a timer source. When I executed emerge zaptel, it installed zaptel 1.0.7

Hello all, I am planning to setup a MeetMe conference functionality on Asterisk-1.4.13without having a Zaptel card. All users will be calling through SIP only. AFAIK, the said application needs a timer which makes use of the ztdummy module. I have basically two (2) problems I am encountering here that [1] I can't load the ztdummy.ko module and [2] Asterisk don't run when running it

I've compiled ztdummy, following the directions on http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to modprobe zt : #modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error FATAL: Error running install command for ztdummy I haven't been able to find any info on what the I/O error might be or how to

I have several servers using ztdummy as the timing source, some CentOS 4.x, some CentOS 5.x, some Asterisk 1.2.x, some Asterisk 1.4.x. "zap show status" differs between the servers: ZTDUMMY/1 (source: Linux26) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 (source: RTC) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0

Hi All, I have a CentOS server that I am trying to configure Asterisk on 1.4 on. Everything seems to go ok, with regards to compiling Zaptel, Libpri, Asterisk (will be using kernel 2.6 timer and ztdummy) Unfortunately I can't insmod / modprobe ztdummy. [root @xyz src]# modprobe ztdummy FATAL: Module ztdummy not found. FATAL: Error running install command for ztdummy

Hi, >However, I believe that zaptel >= 1.4.6 or zaptel 1.2 >= 1.2.21 should >support hires timers for timing on kernel >= 2.6.22 . > >What version of Zaptel do you use? > I was using version 1.4.5.1 I just downloaded and installed version 1.4.7, configure/make/make install finished without an error, but when is used modprobe ztdummy the system said: FATAL: Error