I've compiled ztdummy, following the directions on http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to modprobe zt : #modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error FATAL: Error running install command for ztdummy I haven't been able to find any info on what the I/O error might be or how to resolve it. Any help would be appreciated. Don Fletcher dfletcher@contactpointsolutions.com
On 2007-04-23 at 13:40:33, Don Fletcher <dfletcher@contactpointsolutions.com> wrote:> #modprobe ztdummy > FATAL: Error inserting ztdummy > (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error > FATAL: Error running install command for ztdummy > > > I haven't been able to find any info on what the I/O error might be or > how to resolve it.Does dmesg tell you anything useful? Sometimes modules will output errors there. -d
Tony Mountifield wrote:> In article <462D16C4.2060405@contactpointsolutions.com>, > Don Fletcher <dfletcher@contactpointsolutions.com> wrote: > >> dmesg just says >> ztdummy: Unable to register zaptel rtc driver >> > > You probably have the "genrtc" clock module loaded, instead of "rtc". > ztdummy will only work with "rtc". > > Cheers > Tony >How can I tell if it is the "genrtc" clock module loaded? and how do I switch it to the "rtc" if it is? Thanks Don