similar to: SPA-3000 VOIP-PSTN gateway - long delay between answering and ringing

You can even set it to zero. Mine works well when in zero. The line pick up immediately :> -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chris Stenton Sent: Thursday, February 09, 2006 6:57 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SPA-3000 VOIP-PSTN

Hi there, I'm getting a bunch of these errors from Polycom phones in 1.2.1: ERROR[24301]: chan_sip.c:10790 handle_request_subscribe: Got SUBSCRIBE for extensions without hint. Please add hint to 4003 in context internal I've searched the Wiki and archives to no avail - what do these errors mean? Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web:

I remember seeing something like this on the list a while ago, but I'm darned if I can find it. We have a number of Polycom IP501 phones, some of which have more than one registration on them. When a voicemail is left for a phone with only one registration, the MWI lights up and stays lit until the voicemail is listened to. However, on our phones with more than one registration, the MWI

Greetings, We are trying to make our corporate directory (around 400 entries) available via TFTP to some Polycom IP501 phones. A small (~40 entries or so) file works, but the full file fails to load. Does anyone know what the upper limit on directory entries is? The size of the XML file itself is only 60K - you'd think that would all fit into the phone with no problems..... I would

Greetings, The Polycom SIP 1.5 Admin Guide says this: "3.1.8 Connected Party Identification Where possible, the identity of the remote party to which the user has connected is displayed and logged. The connected party identity is derived from the network signaling. In some cases the remote party will be different from the called party identity due to network call diversion."

Hi there, We're trying to get IMAP voicemail storage working on an MS Exchange server - I would be grateful if anyone who has successfully done this could post the magic soup here, as extensive Google searching has yielded nothing other than tantalizing references to it being done without any specifics. -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web:

Greetings, I have just updated our test server to 2.6.9-34.EL and get the following error messages when compiling zaptel: make[1]: Entering directory `/usr/src/kernels/2.6.9-34.EL-i686' CC [M] /usr/src/zaptel/zaptel-1.2.1/zaptel.o /usr/src/zaptel/zaptel-1.2.1/zaptel.c:383: error: syntax error before "zone_lock" /usr/src/zaptel/zaptel-1.2.1/zaptel.c:383: warning: type defaults

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register with asterisk via sip (extn

Hi, I have a SPA-3000 and would like to use the 911 recipe from http://www.voip-info.org/wiki-Asterisk+tips+911. So I took the simple recipe and modified it slightly: exten => 911,1,ChanIsAvail(SIP/potsoutbound) exten => 911,2,Dial(SIP/potsoutbound/911) exten => 911,3,Hangup() exten => 911,102,SoftHangup(SIP/potsoutbound) exten => 911,103,Wait(1) exten => 911,104,Goto(1) Now,

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Hi there, We are experiencing an issue on RHEL 4 (2.6.9-22.EL) with our TDM110P - whenever we enter 'ztcfg -s' to stop the span, the entire system crashes, requiring a reset. I have seen this (http://lists.digium.com/pipermail/asterisk-users/2005-June/ 112097.html) and thought it might be the answer, but we still get the crash on the first step. I have also seen this thread

Hi Bradley, Yes, I experienced quite a lot of echo with my IAXy, until I switched analog handsets - in my case, it was severe acoustic coupling in a cheap handset. Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp On Mar 7, 2006, at 11:38 AM, Bradley M. Kuhn wrote: > I just purchased an IAXy

Greetings, I am trying to gauge the level of interest in an Asterisk users' group in Vancouver, BC (or in BC in general). If you would be interested, please reply off-list. Regards, -- Anthony Rodgers Business Systems Analyst District of North Vancouver Web: http://www.dnv.org RSS Feed: http://www.dnv.org/rss.asp

Greetings, This is my annual post-Astricon attempt to get an Enterprise Asterisk User Group off the ground. We are a municipal government using Asterisk to replace a legacy PBX. I'd be interested in starting a group of similar enterprise users (say, 100 seats or more) other than resellers, carriers and call-centers who are using Asterisk to support their non-telecom-related business

I have a Sipura SPA2000 2 line SIP FXS box with line 1 on port 5060 and line 2 on 5061. The SPA2000 is on IP address 192.168.17.6, and the asterisk box is on 102.168.17.2. Both SPA2000 ports(5060 and 5061) share the same IP address. Every minute I repeatedly get the following output: SIP Debugging Enabled 10 headers, 0 lines Reliably Transmitting: OPTIONS sip:192.168.17.6 SIP/2.0 Via:

Greetings, I am trying to get either of the above features to work with *, but can't seem to get it quite right. If anyone has them working, I'd sure appreciate an extract from the relevant config files. Or, maybe I'm tilting at windmills, and * doesn't support them - in which case, the underlying business need is to provide the one incoming call on more than one

I just implemented a system using a TE411P hardware echo cancellation card. Per Digium, I setup zaptel.conf, and zapata.conf the same way as I always have. To my surprise calls out to the PSTN had a terrible echo. 1 - 2 second delay, and quite clear. The echo was so bad that I had to remove the hardware echo cancellation module from the card. We are only using the 1st span of this card right

Hi, I'm using the SPA-2000 with firmware 1.06 on the Asterisk PBX, which works great for taking and placing calls, but for for some reason I can't seem to clear the stutter dialtone by either calling the extension I'm on, or the voicemail system on the Asterisk PBX. If I call my voicemail access extension directly, It tells me I have no messages waiting, yet when I hang up, then

I figured out what was going on with the lack of/stuck on stuttered dial tone. Apparently, there are two voicemail directories being referenced: /var/spool/asterisk/voicemail/default, and /var/spool/asterisk/voicemail/local. The sip phones were using /var/spool/asterisk/voicemail/local to dump VM messages into, yet the MWI looks at /var/spool/asterisk/voicemail/default. Does anyone know why