similar to: Dundi key Problem

Below is a snipped debug on our PRI. We are getting number only for the CallerID but the telco says they are sending us Name and Number. We are getting the Name in a second frame but Asterisk is not passing it to the device it rings. The message below says "Presenation allowed of network provided number" which leads me to believe Asterisk thinks it should not be displaying it. Can anyone

Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls

I'm trying to compile the voicemail module with mysql support and I get this error on the chan_zap module . Does anyone have any idea's on this one.. chan_zap.c: In function `handle_init_event': chan_zap.c:5668: error: `ZT_EVENT_POLARITY' undeclared (first use in this function) chan_zap.c:5668: error: (Each undeclared identifier is reported only once chan_zap.c:5668: error: for

Hi, Reviewing the archives I saw /2004-October/070314.html from Tim Lewis. His error is almost identical to mine i.e. when "make clean; make install" in asterisk sub dir, I get the following: pbx_dundi.c:54:18: zlib.h: No such file or directory pbx_dundi.c: In function `update_key': pbx_dundi.c:1315: warning: implicit declaration of function `crc32' pbx_dundi.c: In function

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Just a poll because I am curious, what kind of call volume do you see? Calls/Day -Jonathan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050909/9b8adf09/attachment.htm

All, wondering if you can help, I had a perfectly working Mandrake 9.2 box running on a via Mini ITX 5000/classic. Asterisk (zaptel and libpri) was built from CVS head around 22nd July 2005. I decided now was a good time to ghost it up....although humorous for you all suffice to say, I ended up with a partitionless box! Following the install script I had created I built an identical server to

Hi Guys, since about two weeks pbx_dundi.so from svn segfaults when i load it, 1.4.24 release works fine on the same box. Can someone tell me if that's something weird with my Fedora8 system or a possible bug in svn? Program terminated with signal 11, Segmentation fault. #0 0x00000000 in ?? () (gdb) bt #0 0x00000000 in ?? () #1 0x0881d00c in dundi_encrypt (trans=0x985e6e0, pack=0x985b5e0)

Here is my file to parse and load extensions. No wise cracks about my code.... DB.php is the Pear DB module. (pear.php.net) <?php include('DB.php'); $db_host = ''; $db_name = ''; $db_login = ''; $db_pass = ''; $db_table = 'extensions_table'; define(DBINFO,"mysql://$db_login:$db_pass@$db_host/$db_name"); $db =

Hi All, I'm wondering if I use DUNDi in an enterprise environment, I own and manage all the servers, can I make 1 set of public and private keys and exchange them between servers or do I need to make a key for every server? Is there something with astgenkey/openssl that uses any server specifics to generate the keys or does the key generation seed from the [astgenkey -n "name"]

I have two Asterisk servers running on the same LAN. One starts fine, but when I start the other I get: pbx_dundi.c:4582 load_module: Unable to bind to 0.0.0.0 port 4520: Address already in use and Asterisk does not start. OK I thought, I'll just change the port in dundi.conf. I changed it to 4521 and indeed it started just fine, until I reboot that is. WHen I reboot, I get the same

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir Cohen Sent: Sunday, October 16, 2005 2:59 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] No Audio from Console but mpg123 from shellworksfine. >One possibility is that the volume is set to 0. aumix can be handy here. Does

Anyone know what has happened to the local calling guide? http://members.dandy.net/~czg/search.html -Jonathan

Good day, I just downloaded the latest CVS and it will not compile. This is the error I receive: pbx_dundi.c:54:18: zlib.h: No such file or directory pbx_dundi.c: In function `update_key': pbx_dundi.c:1313: warning: implicit declaration of function `crc32' pbx_dundi.c: In function `dundi_decrypt': pbx_dundi.c:1369: warning: implicit declaration of function `uncompress'

pbx_dundi.c: In function `update_key': pbx_dundi.c:1312: warning: implicit declaration of function `crc32' pbx_dundi.c: In function `dundi_decrypt': pbx_dundi.c:1368: warning: implicit declaration of function `uncompress' pbx_dundi.c:1368: `Z_OK' undeclared (first use in this function) pbx_dundi.c:1368: (Each undeclared identifier is reported only once pbx_dundi.c:1368: for

Hello list, I know this has been brought up before but I dont think there was ever a final answer. Is it legal in the US to modify asterisk to show the CID information that was received as blocked ? Thanks. Dovid p.s. Sorry for the poor typing format, it was written from a mobile phone. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam

Good morning, I have a Polycom 601 with two side cars. I created a list of contacts in XML and it shows up on the side cars exaclty how I set it up in the XXXXXXXXXXXX-directory.xml file (in the order that I wanted it etc.). However when I hit the directories button and then contact directory I see the list in alphabetical order based on the last name. I want it to show up in this list as well in

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

Hi guys!! This is something that have always bother me, hope you can help me... :) I've 8 server connected using IAX / DUNDi, it works just fine. However, sometimes when some of our links goes down the server takes forever to appear back as OK at DUNDi's list and people can't call the other Box. It's happening right now: CLI> dundi show peers 00:14:22:16:54:c5 200.X.X.6