Below is a snipped debug on our PRI. We are getting number only for the CallerID but the telco says they are sending us Name and Number. We are getting the Name in a second frame but Asterisk is not passing it to the device it rings. The message below says "Presenation allowed of network provided number" which leads me to believe Asterisk thinks it should not be displaying it. Can anyone interpret this for me and maybe shed some light on why I am not getting the caller ID name displayed? I have asreceived in my Zapata.conf file. < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x0f, 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04, 0x0a, 0x01, 0x00 ] < [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '5028895567' ] < [70 08 c1 33 31 35 30 35 36 36] < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ] Handle Q.932 ROSE Invoke component Don't know what to do if second ROSE component is of type 0x6 Sending Receiver Ready (84) < Message type: FACILITY (98) < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 6c 6c 20 50 68 6f 6e 65 20 20 20 4b 59] < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x17, 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, 'Phone', 0x20, 0x20, 0x20, 'KY' ] -Jonathan Jonathan Creasy Network Engineer BluegrassNet Development www.bgnd.com www.bluegrass.net o. 502-589-4638 c. 502-889-5567 h. 502-541-0566 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060419/2df6a818/attachment.htm
Pleaase read the archives or the wiki - you will shortly find you need a wait in your dialplan On Apr 19, 2006, at 8:10 AM, Jonathan k. Creasy wrote:> Below is a snipped debug on our PRI. We are getting number only for > the CallerID but the telco says they are sending us Name and > Number. We are getting the Name in a second frame but Asterisk is > not passing it to the device it rings. The message below says > ?Presenation allowed of network provided number? which leads me to > believe Asterisk thinks it should not be displaying it. Can anyone > interpret this for me and maybe shed some light on why I am not > getting the caller ID name displayed? I have asreceived in my > Zapata.conf file. > > > > > > < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, > 0x0f, 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, > 0x00, 0x04, 0x0a, 0x01, 0x00 ] > > < [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37] > > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > < Presentation: Presentation allowed of > network provided number (3) '5028895567' ] > > < [70 08 c1 33 31 35 30 35 36 36] > > < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ] > > Handle Q.932 ROSE Invoke component > > Don't know what to do if second ROSE component is of type 0x6 > > Sending Receiver Ready (84) > > > > < Message type: FACILITY (98) > > < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 6c 6c 20 > 50 68 6f 6e 65 20 20 20 4b 59] > > < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, > 0x17, 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, > 'Phone', 0x20, 0x20, 0x20, 'KY' ] > > > > -Jonathan > > > > Jonathan Creasy > Network Engineer > > BluegrassNet Development > > www.bgnd.com www.bluegrass.net > > o. 502-589-4638 > > c. 502-889-5567 > > h. 502-541-0566 > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
I searched through the archives and the wiki...don't be so pissy...i missed it I guess, my bad.... -Jonathan> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Jerry Jones > Sent: Wednesday, April 19, 2006 9:17 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] PRI caller ID > > Pleaase read the archives or the wiki - you will shortly find you > need a wait in your dialplan > > > On Apr 19, 2006, at 8:10 AM, Jonathan k. Creasy wrote: > > > Below is a snipped debug on our PRI. We are getting number only for > > the CallerID but the telco says they are sending us Name and > > Number. We are getting the Name in a second frame but Asterisk is > > not passing it to the device it rings. The message below says > > "Presenation allowed of network provided number" which leads me to > > believe Asterisk thinks it should not be displaying it. Can anyone > > interpret this for me and maybe shed some light on why I am not > > getting the caller ID name displayed? I have asreceived in my > > Zapata.conf file. > > > > > > > > > > > > < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, > > 0x0f, 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, > > 0x00, 0x04, 0x0a, 0x01, 0x00 ] > > > > < [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37] > > > > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > > > < Presentation: Presentation allowed of > > network provided number (3) '5028895567' ] > > > > < [70 08 c1 33 31 35 30 35 36 36] > > > > < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ] > > > > Handle Q.932 ROSE Invoke component > > > > Don't know what to do if second ROSE component is of type 0x6 > > > > Sending Receiver Ready (84) > > > > > > > > < Message type: FACILITY (98) > > > > < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 6c 6c 20 > > 50 68 6f 6e 65 20 20 20 4b 59] > > > > < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, > > 0x17, 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, > > 'Phone', 0x20, 0x20, 0x20, 'KY' ] > > > > > > > > -Jonathan > > > > > > > > Jonathan Creasy > > Network Engineer > > > > BluegrassNet Development > > > > www.bgnd.com www.bluegrass.net > > > > o. 502-589-4638 > > > > c. 502-889-5567 > > > > h. 502-541-0566 > > > > > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users