Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls start stuttering. The only way this can be fixed is by rebooting the phone. We were able to replicate this problem in all phones while some Polycoms we have do not suffer from this problem. Again, this problem happened AFTER we upgraded to the new firmware. Has anyone seen this? Jesus Mogollon Global IP Systems, LLC http://www.globalipsystems.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050824/f2814565/attachment.htm
Hi, do you have an on-site NTP server? I found that after the firmware update NTP from the * server stopped working. Regards Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jesus Mogollon Sent: 24 August 2005 22:11 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12 to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls start stuttering. The only way this can be fixed is by rebooting the phone. We were able to replicate this problem in all phones while some Polycoms we have do not suffer from this problem. Again, this problem happened AFTER we upgraded to the new firmware. Has anyone seen this? Jesus Mogollon Global IP Systems, LLC http://www.globalipsystems.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050825/7f8f7e10/attachment.htm
Hi Lee: NTP is working as expected, but it does take a couple of minutes (!) to get the date from the server.... Jesus Mogollon 2005/8/25, Lee Archer <lee.archer@pentagon-systems.com>:> > Hi, do you have an on-site NTP server? I found that after the firmware > update NTP from the * server stopped working. > Regards > Lee > > ------------------------------ > *From:* asterisk-users-bounces@lists.digium.com [mailto: > asterisk-users-bounces@lists.digium.com] *On Behalf Of *Jesus Mogollon > *Sent:* 24 August 2005 22:11 > *To:* asterisk-users@lists.digium.com > *Subject:* [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 <http://1.0.1.2> > > Greetings all > > Grandstream released a new firmware and it seems like the speaker phone > problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now > created. The worst of these new problems is that the whole phone starts > degrading, the volume starts getting lower and lower. The ringing starts > fading and the calls start stuttering. The only way this can be fixed is > by rebooting the phone. We were able to replicate this problem in all > phones while some Polycoms we have do not suffer from this problem. Again, > this problem happened AFTER we upgraded to the new firmware. > > Has anyone seen this? > > > Jesus Mogollon > Global IP Systems, LLC > http://www.globalipsystems.com/ > ########################################### > > This message has been scanned by F-Secure Anti-Virus for Microsoft > Exchange. > For more information, connect to http://www.f-secure.com/ > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>-- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050825/aaf24963/attachment.htm
Well it's only worked once and I've left the phones several hours. I've done various debugs and the phone is asking for NTP and the server is answering but its not getting set. Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jesus Mogollon Sent: 25 August 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 Hi Lee: NTP is working as expected, but it does take a couple of minutes (!) to get the date from the server.... Jesus Mogollon 2005/8/25, Lee Archer <lee.archer@pentagon-systems.com>: Hi, do you have an on-site NTP server? I found that after the firmware update NTP from the * server stopped working. Regards Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jesus Mogollon Sent: 24 August 2005 22:11 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12 to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls start stuttering. The only way this can be fixed is by rebooting the phone. We were able to replicate this problem in all phones while some Polycoms we have do not suffer from this problem. Again, this problem happened AFTER we upgraded to the new firmware. Has anyone seen this? Jesus Mogollon Global IP Systems, LLC http://www.globalipsystems.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050825/6a3300d9/attachment.htm
I can time sync with time.nist.gov but not with any internal servers. I read in the changelog about them fixing something related to NTP on the same subnet but it doesn't say whether it should work or shouldn't. Regards Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jesus Mogollon Sent: 25 August 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 Hi Lee: NTP is working as expected, but it does take a couple of minutes (!) to get the date from the server.... Jesus Mogollon 2005/8/25, Lee Archer <lee.archer@pentagon-systems.com>: Hi, do you have an on-site NTP server? I found that after the firmware update NTP from the * server stopped working. Regards Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jesus Mogollon Sent: 24 August 2005 22:11 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] GXP 2000 Firmware 1.0.1.2 Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12 to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls start stuttering. The only way this can be fixed is by rebooting the phone. We were able to replicate this problem in all phones while some Polycoms we have do not suffer from this problem. Again, this problem happened AFTER we upgraded to the new firmware. Has anyone seen this? Jesus Mogollon Global IP Systems, LLC http://www.globalipsystems.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050825/89a3ccf1/attachment.htm
Hi all, One of my clients had been sending me issues with G729 codec by Digium. According to him, the Digium codec is able to send calls into a Cisco AS54xx and AS53xx gateway via SIP, however, when calls are originated from the AS, asterisk using Digium G729 is unable to receive the call correctly. Had anyone encountered such an issue ? Regards, Nir S
Nope, working as we expect. Any more clues?, "unable to receive...Correctly" is not a easy to understand tech. phrase. LTenorio -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nir Simionovich - CTO Sent: Thursday, August 25, 2005 7:47 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Digium G729 Hi all, One of my clients had been sending me issues with G729 codec by Digium. According to him, the Digium codec is able to send calls into a Cisco AS54xx and AS53xx gateway via SIP, however, when calls are originated from the AS, asterisk using Digium G729 is unable to receive the call correctly. Had anyone encountered such an issue ? Regards, Nir S _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users