similar to: Asterisk SIP phones to Cisco Unity via CCM4.0SIP Trunk

Hi, I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and about 45 SCCP phones on the ccm, and 200 users on unity. we want to migrate all users to IP Phones to ditch our ancient phone system. I would love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet and run sip to an asterisk server, but have their voicemail on Unity. these phones are $150 each,

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting

Has anyone here any experience in getting an Asterisk box to talk to a Cisco Unity system? I have a potential customer who would like to add a conference bridge to their existing Cisco Unity setup. The digging I have done so far suggests that it should be possible to talk SIP between them, but I'd be interested in any stories of success or failure. Cheers Tony -- Tony Mountifield Work: tony

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in

> Hrm, I made a new extension, made sure that I could dial it from a ccm phone -> > asterisk. then I set that as an alternate MWI extension ( it always put X in as an > additional entry ). the AGI I have behind that extension never runs ( in fact, > unity never calls asterisk ). > any other suggestions? You mentioned that a CCM phone can dial the Asterisk extension. Do

Hello all, A client of us, is thinking to migrate their actual PBX to a Cisco CallManager. We want to sell him an asterisk box to complement the Cisco PBX. I think to use asterisk as a Voicemail server (Replazing the Cisco Unity) Has asterisk all the functionalities to replace a CIsco Unity server? Which functionalities Cisco Unity has than asterisk could cover? How could asterisk complement the

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

Hi all, first post. My company's office in the UK is soon going to get a Cisco VoIP solution system. What I am interested in, and couldn't find googling, is if it is possible to connect an Asterisk solution to the Cisco system and have all the nice advantages of it (mainly calling the extensions and directly reach the other office). Thanks, have a nice day Simone

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Hello list. No intention to start a flamewar here but I would really like opinions from those who know both the Cisco and Asterisk system. I'm working for a company with 15 offices in 11 countries, offices are relatively small (3-20 people each) and most of them have a Cisco 1760 Router installed with Call manager express (CME) and 1-3 ISDN lines (2-6 simultaneous calls). We

Hello, I noticed that in the last period, many gaming companies started to build free games for the online platforms. I think that in the next period of time, they will appear allot of 3d games on social sites. My example is N.O.V.A. from facebook (developed by Gameloft). From my pov it's a very good start for online 3d games. So, what's my problem: I want to play nova on linux, using

Installed unity perfectly, no error whatsoever, although when i run it, whatever path i put in it to create a new project in, it says "Specified path is not valid(should be a name of non existing or empty directory). I also tested using Unity Loader, and it shows the splashscreen until it crashes Ubuntu. I'm using Ubuntu 10.10, Maverick Meerkat. I can run it fine on Windows 7, without

re, all. Here's a bug filed against Google Chrome for the same problem: http://code.google.com/p/chromium/issues/detail?id=80856 and here's some forum users complaining about the same problem, and regrettably their solution is to stop using Ubuntu's Unity mode: http://ubuntuforums.org/showthread.php?t=1742354. I work for VMware and for our Unity mode (which has the unfortunate name

Hi all, first post. My company's office in the UK is soon going to get a Cisco VoIP solution system. What I am interested in, and couldn't find googling, is if it is possible to connect an Asterisk solution to the Cisco system and have all the nice advantages of it (mainly calling the extensions and directly reach the other office). Thanks, have a nice day Simone

Hi, I'm on ubuntu 11.04 with the Unity environment. I'd like to create a shortcut of an application in wine to the ubuntu menu, but it doesn't work. :( How can I do that ? Thanks a lot,

Hi there, While I am Getting Assistance on jump starting Wot... I might as well ask on another topic... The Unity Web player I heard from various rumors That I could be able to Run the unity web player and play browser games with it... However My first attempt went Terribly Wrong... What I tried first was to download and run a Windows version of mozilla firefox through wine and install the Unity

Hi, I am developing a call recording application on Asterisk 11.2 and have this configuration in my dialplan: [macro-ccdev2-rec] exten => s,1,MixMonitor(${ARG1},b) [outgoing-originate] exten => _X.,1,NoOp(Will send call to ${EXTEN}) exten => _X.,n,Dial(SIP/${EXTEN}@x.y.z) [outgoing-originate-rec] exten => h,1,Agi(agi://localhost/ajpbx.agi?path=uploadrec&callid=${CC_CALLID})

I've got an Asterisk to H323 bridge working... but I'm having a few problems.. I got everything working by setting up with the Asterisk box as a gateway in CCM. I've got two issues.. 1. If I call off net.. (Asterisk -> CCM -> Cisco 5300(I think) -> PRI) the calls will proceed.. connect, and I get about 4-5 seconds of RTP and * tells me the remote end terminated my call. I

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send