similar to: Snom360 Sidecar & Asterisk

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

2011/11/30 Mike <list at net-wall.com> > Hi Olivier,**** > > ** ** > > It if occurs only on the sidecar, I would imagine this is either a > defective sidecar/Polycom phone, or a defective PoE switch not giving > enough power. Changing PoE port would eliminate of confirm the PoE port > being the issue, but I?m betting on a Polycom defect.**** > > ** ** > >

Anyone have a Snom they're happy with? How did you manage that? :) I have a system of: Asterisk 1.2.3 2 Wildcard TDM400P Rev I and E/F 1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841 ~15 Grandstream 101 Everything (currently) is on the same network, not a router to be seen between any two. Also everything, except the snom, is working sweetly. The main problem is ECHO.. awful echo and

I'm looking for some ideas of people who have setup a sidecar (eg: Aastra 560M). Obviously it's handy for BLF (to see who's on a call)...but what else? Anyone want to share interesting things they've done with a sidecar? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Here is my setup: * is on a NAT'd subnet, but also has an externally routable IP address. I have a Snom360 that's external to this and behind NAT. The Snom360 can call other phones in * subnet (by their internal extension numbers) and voice is transmitted fine; however, when I attempt to check voicemail (or any * voice recordings for that matter) I can't hear them. The phone just

Hi, Watching Snom 870's video (http://www.youtube.com/watch?v=9e8hPxX0oDU), you can see a new sidecar (phone extension) which seem very interesting. Has someone details on this extension ? Any release date or/and data sheet ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is the IP 650 sidecar compatible with asterisk? If I pair it with the IP 650 phone, can I have more than 6 "lines" registered w/ the server? Jeremy Mann Director of IT Texas Health Management Group Direct Line: 817-310-4956 Main Line: 817-310-4999 Fax: 817-310-4990 Email: jmann at txhmg.com ________________________________ This e-mail, facsimile, or letter and any files or

Hi all, One of the things that I keep being asked for is a sidecar for the receptionist phone. Are there any SIP phones available on the market with a sidecar in addition to the snom? Or is the snom my only option? Any help would be appreciated. Thanks, Max

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hi, Has anybody else noticed that MOH does not play on parked calls in 1.6.2.14? Or is it just my setup? MOH seems to work in every other respect (Call Held or in-Queue), but when a call is parked, the logs show MOH being started, but the parked party hears nothing. The verbose logs show the following. Any thoughts on whet to check next? Thanks, Steve ### Call comes in here and is answered

We are having an issue with the SPA962/932 combo where the phone and the sidecar will reboot unexpectedly ? could be onhook, could be on a call, doesn?t seem to matter. I read that certain early firmware revisions could cause this so I?m running what was a week ago the newest available (5.1.18). A call to Linksys support suggested that I ensure that the phones are using a recent firmware version

If anyone on the list has a Polycom 601 + sidecar expansion they want to sell for less than $250 including shipping to New York 10027 then email me details. Cheers, Dean -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080712/f61c599c/attachment.htm

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Thanks for all the comments on the 3Com phones. Thankfully, there is a large number of phones out there to dig through looking for the right solution. What I have not been able to find, after spending all weekend looking, is a good solution for an attendant console. We have 2 receptionists that need to be able to view all 60+ phones (we could probably weed it down a bit if we had to,

Hi I'm currently using a windows image processing application that regularly writes the user's image adjustments out to a 'sidecar' file in the same directory as the original image. When the original file is on a local disk this works fine but when the original image is on Samba share, the sidecars are not created. The application reports the following in its log: 2012-07-14

Hi everyone, Ive just installed a bunch of Snom 360s, and now having a NIGHTMARE of problems! Ive got a receponist phone with a extra sidecar on it. And when she gets 2+ calls and puts them on hold, when she goes to transfer them out the calls on hold get merged together. Somehow the calls on hold get merged and not to the extension needed!! Any help on this would be great guys, that would be

I would like to know which kind of solutions are available, both software and hardware, for human operator in an asterisk environment. The operator should be able to provide the basic standard operation, like to transfer calls and to see if the extensions are busy or not and so on. Thanks in advance, Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.

I was always puzzled by posts to the list about people having problems getting hints to work on a Snom, since I always seem to have no problem making it work. That is, until today when I tried to get a sidecar to work. All I could do was get a monitored extension light to light up continuously, regardless of state. Frustrating! Going back to my working dialplans where I got 1 or 2 lights working

Looking for two things: 1. Anyone that has dialplan logic for an executive assistant. My owners want their extensions to ring on her phone, and be very obvious to her which extension is ringing. They also want her to have presense. She's got Polycom IP 650 with sidecar, they have IP 550 phones. Thusfar I've got her registering to 4 extensions. Each extension is labeled with an