similar to: Asterisk SIP phones to Cisco Unity via CCM 4.0 SIP Trunk

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in

Has anyone here any experience in getting an Asterisk box to talk to a Cisco Unity system? I have a potential customer who would like to add a conference bridge to their existing Cisco Unity setup. The digging I have done so far suggests that it should be possible to talk SIP between them, but I'd be interested in any stories of success or failure. Cheers Tony -- Tony Mountifield Work: tony

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

> Hrm, I made a new extension, made sure that I could dial it from a ccm phone -> > asterisk. then I set that as an alternate MWI extension ( it always put X in as an > additional entry ). the AGI I have behind that extension never runs ( in fact, > unity never calls asterisk ). > any other suggestions? You mentioned that a CCM phone can dial the Asterisk extension. Do

Hello all, A client of us, is thinking to migrate their actual PBX to a Cisco CallManager. We want to sell him an asterisk box to complement the Cisco PBX. I think to use asterisk as a Voicemail server (Replazing the Cisco Unity) Has asterisk all the functionalities to replace a CIsco Unity server? Which functionalities Cisco Unity has than asterisk could cover? How could asterisk complement the

Hi, I was able to work out SIP trunk between Asterisk and CCM 4.x without any issues. Whereas SIP trunk in CCM 5.x is not working with Asterisk. Asterisk is sending OPTIONS messages to CCM 5.x for which CCM is not replying. For the same reason Asterisk is marking it as UNREACHABLE. Anybody got Asterisk and CCM 5.x intergation working. How can I fix the problem which I'm facing with CCM 5.x?

Hello, My problem is, outgoing calls (from asterisk to CCM) work fine but incoming (from CCM to Asterisk) does not work because of CCM is trying to use g729 over SIP trunk. I have found that link after a quick search. Problem is the same as in link below (However my Asterisk version is 1.8.13) and solution seems to have H323 trunk between CCM and Asterisk for using g729 codec. The post was

Hi, I have the following config: [7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP--> [X-lite] Is there a chance to avoid the RTP stream from passing through the Cisco CCM ? I would like to have all RTP handled by the *. This is just a testbed, for a larger project. What I want to achieve, is actually this: [Cisco Phone] <--skinny--> [Cisco CCM]

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, Asterisk is running strictly VoIP over the network and using CCM as the trunk. Calls from the SIP phones connected to Asterisk work fine. They can call both external numbers and any Cisco extensions attached to CCM. Calls from CCM to Asterisk fail without any notification in Asterisk (and I DID have this working at one

I've started to look at how I might go about using the Voicemail functionality of Asterisk in our Call Manager environment we have in the office. We're currently using Unity but want to look at moving off that if at all possible. I've read a few things on the wiki and also taken a look through the mailing list to see what info is out there to do this kind of setup, but also wanted to

Okay, another Cisco related issue (sorry!). Single Asterisk box at location 1. Single Cisco box at location 2, however the Cisco is also the PBX for location 3 (same physical machine, calls routed via VoIP). Trying to have Asterisk be able to call EITHER Call Manager location. The single SIP trunk in CCM (version 6.1 mind you) only allows a single device pool to be selected. So configuring calls

Hi all, first post. My company's office in the UK is soon going to get a Cisco VoIP solution system. What I am interested in, and couldn't find googling, is if it is possible to connect an Asterisk solution to the Cisco system and have all the nice advantages of it (mainly calling the extensions and directly reach the other office). Thanks, have a nice day Simone

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

I've got problem with connecting asterisk to CCM. Our side has Asterisk system other side CCM , ehrn i dial a number on other side channles created , connections established but nothing happend , just silence , and after some time busy tone. Sides sending ad reciving g711 codec , but we need that sides send and recive g729 (we have licenses) , if in h323 conf i try to : disallow=all ,

Hello list. No intention to start a flamewar here but I would really like opinions from those who know both the Cisco and Asterisk system. I'm working for a company with 15 offices in 11 countries, offices are relatively small (3-20 people each) and most of them have a Cisco 1760 Router installed with Call manager express (CME) and 1-3 ISDN lines (2-6 simultaneous calls). We

Hello, I noticed that in the last period, many gaming companies started to build free games for the online platforms. I think that in the next period of time, they will appear allot of 3d games on social sites. My example is N.O.V.A. from facebook (developed by Gameloft). From my pov it's a very good start for online 3d games. So, what's my problem: I want to play nova on linux, using

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!