Displaying 20 results from an estimated 3000 matches similar to: "Fritz card technology & German *"
2006 Mar 24
3
Call terminated after 60 seconds
Hello,
I switched from my PSTN provider to a voip provider. (Voicedata in
the Netherlands)
>From the moment i switched all inbound calls are terminated after
aproximatly 1 minute.
The provider tells me it's not their issue since I have no other
configuration than all their other users.
What can I do.
I removed all asterisk functionality by forwarding the inboud call
directly to a local
2007 Mar 24
1
Issue with Hamlet ISDN PCI card(Cologne Chipset)
Hi everybody
I have installed a TrixBox with Asterisk 1.2.14 and relative upgreaded
software.
I Bristuffed it with last version of bristuff to use a Hemlet PCI ISDN CARD
in a normal Italian EUROISDN installation. The * works fine except for the
ISDN CARD. It is always Channel D down, but if a Call comes in, it works
perfectly for some time, both inbound and outbound. It prompts Channel D UP!
2007 Mar 24
2
freepbx -> DB Error messages...
Hi all,
I am probably missing something ultimately obvious, but I have a problem
configuring freepbx...
Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu
installation guide on freepbx.org.
System pxe-boots from a server with NFS root on same
Using * 1.2 current (from source, not .deb's)
Using mISDN-streams (from source, not .deb's)
Using freePBX-2.2.1 (from source, not
2006 Mar 16
1
G.729 codec licencing
Hi..,
we have two asterisk server interconnected to each other through IAX2 trunk in two separate office.
with this bellow configuration do we need to have Licensing for using G729 codec????
Office A --------T1 ----- Astrisk TE05P----------------IAX2----------------Astrisk Box -2
| |
2006 Oct 18
1
IAX softphones
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Message: 16
Date: Wed, 18 Oct 2006 16:10:38 +0100
From: "Neil Tancock" <neil@safeharbourit.co.uk>
Subject: [asterisk-users] IAX Terminal
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
2006 Mar 21
3
Zap<-->IAX codec?
Hi,
at my Asterisk box, I have a few of IAX2 phones (configured with
alaw/ulaw/gsm codecs, in this order) and a PRI E1 line.
In iax.conf I hav:
disallow=all
allow=alaw
allow=ulaw
allow=gsm
During some incoming call, I read at console:
-- Executing Dial("Zap/2-1", "IAX2/215|20|TtwW") in new stack
-- Called 215
-- Call accepted by 10.97.1.7 (format ulaw)
--
2006 Jun 26
4
Oh oh. Micro$oft just noticed VoIP
It will be interesting to see how many standards get broken, and how
many proprietary hooks get thrown into the pot. The bean counters smell
some money, and their OS franchise is waning:
http://www.nytimes.com/2006/06/26/technology/26soft.html
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
2005 Oct 20
0
German ISDN&DSL Card "AVM Fritz!Card DSL"
Hello everyone!
Has anyone had success in configuring the "Fritz!Card DSL" card, a
combination of an ISDN adapter and a DSL modem from the german AVM GmbH
(http://www.avm.de/) in a dom0 Domain (Xen 2.0.7)?
I had success in compiling the modules from
http://www.avm.de/de/Download/index.php3 and they load fine with
"modprobe fcdsl". But with the Xen dom0 Kernel they seem to
2005 Mar 15
2
fcpci - capi driver for Fritz
I've put my fire proof suit on ready to ask a question ;o)
Redhat 9
Kernel 2.4.20-8
AVM Fritz PCI
Problem 1...
i have followed instructions from:-
http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI
(Plus many many other sites found via google over the last 16 hours)
after modifying the makefile & defs.h,
2003 Jul 27
4
ISDN Fritz & RedHat 8.0
Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0
system with *.
If so could someone give me some pointers on getting the right sequence
of installing the drivers and which versions to use.
Thanks,
Stuart
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2005 Oct 31
3
Fritz 5.32
Hello,
Using Fritz 5.32 with wine (and ubuntu breezy), I can't see the BMP
pictures.
Fritz 5.32 is free and downloadable here :
http://www.pcgo.de/aktuell/ausgabe0103/fritz.zip
I need help
Thanks
2003 Jul 17
4
AVM Fritz! to connect LAN with ISDN line?
Hello,
Is it possible to use * as a gateway in the following setup:
LAN (with Windows NT/Linux PCs)
|
Ethernet (IP)
|
Linux PC with * and AVM Fritz! ISDN Adapter
|
ISDN
|
Someone with a analog/digital phone (POTS)
Basically, people sitting on their PCs will wear a headset, and whenever
they want to call someone,
2004 Dec 21
1
two avm usb isdn fritz v2.0 cards
I have a problem trying to install two avm fritz cards on one asterisk
machine. I am using fcusb2 driver. 1 card works perfectly.
I tried to recompile driver like it is described on this page but with
no success.
http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
I think the problem is that i can not find this part of code.
dev = pci_find_device (AVM_VENDOR_ID, AVM_DEVICE_ID, dev);
if
2004 May 28
3
2 Avm fritz passive card in the same box
Hi, I successfully installed 2 avm card in my asterisk box but I'm unable
to make call. My capi.conf is:
msn=0721111,07211115
incomingmsn=*
controller=1,2
softdtmf=1
context=default
echocancel=yes
callgroup=1
devices=2,2
my capi info :
Contr1: 2 B channels total, 2 B channels free.
Contr2: 2 B channels total, 2 B channels free.
my extensions.conf :
exten =>
2003 May 14
2
AVM Fritz/Capi without suse ?
Hi All,
Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards
suse, and after trying them with RedHat 9 I've not got very far. The
module compiles but dies when I attempt to modprobe it.
I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to
2004 Apr 08
2
Fritz ISDN PCI v2 and CAPI
Hi,
First, here is my config: Kernel version 2.4.25 on a Fedora distro,
Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers
deal with Asterisk but I can't try to figure out to get of this issue.
As I see, Fritz modules are integrated with the kernel, so I directly
loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by
downloading archives of the
2007 Aug 28
1
ATrpms/Fritz FCPCI CAPI/Fedora 7
HI all,
Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the
drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/
I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying
/etc/capi.conf (removing the coment # in front of fcpci line) I received the
following error when executing 'capiinit' -
FATAL: Error inserting fcpci
2005 Jul 25
4
Fritz PCI card in ptp mode with chan_misdn
Hello !
I would like to get working a Fritz PCI card using chan_misdn
operating in ptp mode.
Afer compiling mISDN into the kernel and building chan_misdn
Asterisk stops loading with :
[chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri))
== Parsing '/etc/asterisk/misdn.conf': Found
UnLocking config_mutex
== Registered channel type 'mISDN' (This driver enables
2004 Sep 03
2
Using AVM Fritz!PCI as zap interface
Hello!
Is there a way to use AVM Fritz!PCI as a ZAP interface and have it
configured for ZAP channels?
Thanx in advance!
Roland Zagler
mailto:r.zagler@fog.at
@fog smart partners
2005 Feb 07
2
2 x Fritz!pci card
Hello,
Has anybody installed 2 Fritz pci cards in an asterisk box ?
I can't make them work : each card is working fine when installed alone
(with chan_capi), but I get a kernel freeze when doing 'insmod' with
both cards installed.
I am using Mandrake 10.1 with kernel 2.6, so the hack described at
http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the
hack requires