similar to: Echo on phones...

I have an Asterisk 1.2.16 server running CentOS 4.4 with a TE110P card and an OpenVox A1200P card. Up to today everything was working perfectly. The OpenVox card has 8 FXS and 2 FXO ports. The two faxo ports are used for a GSM adapter and for an ATA connected to Vonage. The problem we started noticing today was that the Vonage line will receive a call and then cannot connect to any of the SIP

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

I have a customer running Asterisk 1.2.13, Zaptel 1.2.11 with a TE110P, a TDM04B and an Astribank-32. They have been complaining that there is echo on calls even when they are IP to IP on the same network. There are 18 Aastra 9133i phones and 30 analog phones connected to the Astribank. I can understand there being a bit of echo on the analog phones, but I do not understand why there would be

I am having a problem with an Asterisk 1.6.2.15 server that runs a small call center with Queuemetrics. In the past month we've had this problem 3 times. The problem is that Asterisk simply stops responding. No calls in or out and you cannot even get to the CLI. The process seems to be running but there is simple no activity. All I see in the log files is: [Jan 14 16:30:46]

Now that Nufone is dead, what are other providers of 800 numbers that work with Asterisk? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

I''m reasonably confident that the problem I''m having here is upstream. RHEL5: # yum repolist | grep puppet puppetlabs-deps Puppet Labs Dependencies El 5 - x86_64 45 puppetlabs-products Puppet Labs Products El 5 - x86_64 161 # yum clean all Loaded plugins: security Cleaning up Everything # yum repolist 2>&1 | grep puppet

I have been using Sixtel from the beginning of the year and service was getting worse and worse. Yesterday I tried to access the website to get the CDR and I got an error saying that the domain no longer exists. I checked the whois and it says that the domain is on hold. Have they finally folded? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel:

On 2/22/18 3:46 PM, Antony Stone wrote: > On Thursday 22 February 2018 at 21:41:41, Carlos Chavez wrote: > >> On 2/22/18 1:07 PM, Antony Stone wrote: >>> On Thursday 22 February 2018 at 19:10:51, Carlos Chavez wrote: >>>> Usually phone companies set the outgoing CallerID for you but >>>> >>>> recently we got control over that and are

This is the third time I''ve sent a message about this. Does anybody know what''s going on? I''m going to file a bug if this isn''t fixed soon. RHEL6: http://yum.puppetlabs.com/el/6/products/x86_64/repodata/primary.sqlite.bz2: [Errno -1] Metadata file does not match checksum Trying other mirror. Error: failure: repodata/primary.sqlite.bz2 from

I want to buy a new server to run Asterisk and after looking at prices for the Athlon XP 3000+ it costs the same as an Athlon 64 at the same speed rating. I was wondering if Zaptel/Asterisk will compile/work on an Athlon 64? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V.

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

On 11/14/17 4:27 PM, Joshua Colp wrote: > On Tue, Nov 14, 2017, at 06:25 PM, Carlos Chavez wrote: >> On 11/14/17 3:55 PM, Joshua Colp wrote: >> >>> On Tue, Nov 14, 2017, at 05:47 PM, Carlos Chavez wrote: >>>> I followed the blog post and I can get video from the conference if >>>> I configure the bridge as follow_talker so I know everything

Sent: Sunday, June 07, 2009 5:43 PM Subject: Question about R an SPSS Dears Sirs: Venables, Smith and R-Development Core Team I am reading about the functional features of R statistical software, because I want to compare these progarm with the basic module of SPSS software. I would like to know if the R version 2.9.0 application is capable of read and procces entry files

Can anyone recommend some White Papers or Success Cases that we can use to ease the mind of a customer that has not heard much about Asterisk? All they know is Avaya at this point. -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am trying to set the CDR(userfield) to a certain vaule using the application map of features.conf but I am not able to do it. When I receive a call I would like to tag it with a client code (3 digit numeric) so I can referenci it later from the CDR. I have edited features.conf with something like: code => #111,self,SET(CDR(userfield(111)) or

On 7/20/17 8:47 AM, Marcelo Terres wrote: > Which version of Asterisk are you using? Are you compiling it with the > bundle pjproject ? > > --with-pjproject-bundled > > Regards, > > Marcelo H. Terres <mhterres at gmail.com <mailto:mhterres at gmail.com>> > IM: mhterres at jabber.mundoopensource.com.br > <mailto:mhterres at

On 2/22/18 1:07 PM, Antony Stone wrote: > On Thursday 22 February 2018 at 19:10:51, Carlos Chavez wrote: > >> Usually phone companies set the outgoing CallerID for you but >> recently we got control over that and are now setting the outgoing >> Calleir ID ourselves. My problem now is that the CDR will put the >> outgoing CID in the CDR instead of the extension

Hi, It seems that my flash panel only works when I specify my ip address and not the host name. I've tried quite a few things (change host file, dns resolve, proxying....) but couldn't get it to work. Anyone knows how to solve this? Thanks, Ohad -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am having a problem with a couple servers. They both have a Digium TE110P and a TDM04B card. I have setup the system so the TE110P uses channels 1-31 and the TDM04B 32-35. The problem is that when we reboot the server sometimes the TDM04B is recognized first and the TE110P second so the configuration fails. I do not know why this happens and to solve this I have to do a "service