similar to: SPA-841 "Decode Latency"?

Hello. A while back, I noticed an odd problem with our SPA-841 phones connected to Asterisk. Now we are having a different odd problem, and I'm not sure if they're related. I wonder if anyone else has experienced anything else like this, and/or if there is any reasonable explanation? Occasionally, one of our SPA-841's will spontaneously start up with "Welcome to Comedian

Topology: analog_phone-----SPA2102-----Navini_Wireless_Router------ISP------Asterisk A ping against the asterisk server shows aprox 145ms roundtrip. 128kbps upstream 512kbps downstream g729a as codec signal quality of the navini router: 100% The ATA operates correctly in every form, however sometimes when someone is talking to me (the other person is at pstn) and then I start talking the other

Hello. I'm currently evaluating the Sipura SPA-841, and snom 190 phones for use in an Asterisk PBX/call center environment. One feature the SPA-841 has, which I can't figure out how to implement on the snom 190, is the "make/accept calls without registration" feature. Or more specifically, "produce a dial tone even if I'm not registered." I would like to set our

Froogle found me one supplier for the SPA-841, not sure I trust them though. Does this phone even exist yet? Does anyone have any experience with it? Does anyone know a vendor other than Atacomm/voipsupply?

Hello, How good is :SPA 841 form SIPURA. Thanks Varun

I have just bought several Sipura SPA-841 SIP phones, and after some testing I have found out that the volume received by other parties when calling using the handset is very low. I've been able to reproduce this problem in the 3 phones I've tested so far. I've tried tweaking several configuration options but nothing I has helped so far. Has anybody else experienced this problem?

Hi all, The problem is on the volume of the voice sent by the SPA-841. I think the echo cancel algorithm sets a limit to the microphone when detects sounds or noise from the earphone. This problem generates an oscillation on the voice volume sent by the phone and even turns it off completely for very little lapses of time making the communication very uncomfortable. I manage three different

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

I am looking at some lower cost phone to use with Asterisk. What is the ArtDio IPF-2000 or the Sipura SPA-841 like? Also, I see voipsupply.com has an ArtDio IPF-1000 listed, is this a new or an old model? I cannot find any information on it. Adi

I hooked up a SPA-1001 with asterisk yesterday and all works well except the phone doesn't ring. The phone I'm using has a LCD display so I can see the call come in. (with caller id info) I can answer and complete the call but it's just not ringing. The phone rings if pluged into a POTS line so it's not the phone that's the problem. I've used the SPA-1001's web

Has anyone got any information on bulk provisioning of Linksys SPA-941/94s? There is an overview in the admin guide but it refers to a different provisioning guide that I haven't found anywhere. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com

Hi Guys! I have a problems with some sipuras 841 and asterisk 1.0.9. Im using 841 with asterisk 1.0.9 with a digium card (single e1 span) with steve's unicall. Everything compiled fine and in fact I can make and receive calls but I have a problem with bad sound when the sipuras call the outside E1's lines. I can listen to the caller without problems but they heard me with a choppy

Has anyone gotten call-waiting to function on the 4 line SPA-841? I've seen some documents that say it can do it, some say no way. If yes, can you share configs / SPA-841 settings? If no, did you work around it? I can call out just fine on all 4 lines, however, if I am on the line, another call coming in does not ring the 2nd line...it just goes to busy / VM. -Darren

Anyone having problems with registration to * from a SPA-841? I got a SPA-841 a week ago. I noticed that sometime it could not be reached (dialed to) and it can't dial. In this case the line LED is yellow. I enabled logging to syslog and there is a hint as to what happens. For some reason sometimes it gets "401 Unauthorized" Any ideas what is happening and how to fix it? Phone

Hi everyone, I'm wondering I would accomplish the following: I want to dial several SIP extensions simultaneously, HOWEVER, for different times (say ext 10 for 15 sec and ext 11 for 30 sec), and potentially with different headers (such as ALERT_INFO) and codecs for each extension. Obviously whoever picks up first gets the call. After the longest timeout expires (30 sec in this example) I want

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

Sipura has implemented auto-answer in version 0.9.5 of the SPA-841 firmware. However, it is implemented via the Call-Info header, which Asterisk stable doesn't currently support. The attached patch implments a quick hack to support the Call-Info header from the Dial() application by way of setting the CALL_INFO variable. For example, the following macro can be used to dial up a single

Running * CVS with a SPA-841 (0.9.5) and can't seem to get the message waiting light to come on automatically. There is a control in the web interface to turn it on and off (seems rather curious to me but whatever). Has anybody got an idea as to where I may be going awry? TIA, Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

Hi list, I have a couple of questions related to asterisk billing and the generation of cdr logs. I've searched the wiki but have not found my answers, hopefully you guys can help. 1) When are asterisk CDR logs _normally_ generated? When the call arrives, when the call hangs up, or both? I have looked at the records created and it seems to only generate it at the time the call is