Has anyone gotten call-waiting to function on the 4 line SPA-841? I've seen some documents that say it can do it, some say no way. If yes, can you share configs / SPA-841 settings? If no, did you work around it? I can call out just fine on all 4 lines, however, if I am on the line, another call coming in does not ring the 2nd line...it just goes to busy / VM. -Darren
On Tue, March 29, 2005 12:24 am, Darren Wright said:> I can call out just fine on all 4 lines, however, if I am on the line, > another call coming in does not ring the 2nd line...it just goes to busy > / VM.DO you have the phone registering 4-separate time with your server? I initially had my 2-line unit setup that way and was getting what you describe until Sipura told me that both of the buttons needed to be using the same single line. I can get you the names of the fields to set tomorrow when I've got access if you'd like. Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian Ridge Drive p:404-932-1355 f:770-516-4841 Woodstock, GA 30189-6856 USA
I was the one who originally asked the question......upgrading to @home .7 fixed it for me. I hadn't dug into the dialplan, but all is well now. Too bad it was all for naught. The SPA-841 speakerphone sucks ROYALLY. -Darren -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Clark Sent: Wednesday, March 30, 2005 4:50 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] SPA-841 Call waiting? Paul Dugas wrote:> On Wed, March 30, 2005 4:22 pm, Steve Clark said: > >>I'll go thru the config one more time if it still doesn't work I'll >>then try having it register with asterisk not that I can see where >>that should make a difference. > > > Huh? Then what are you registering with? My 841 basically does > nothing until after it registers with the server. Perhaps I'm missing> something here... >There is an option under admin->ext that you can set to allow making calls with out reg. and ans calls without reg. But I just changed it to register and have the gotten the same results. I call form phone a thru asterisk to the phone B and answer it. I then use phone C to call phone B and I get a sip 486 busy here and asterisk goes into vm. I have on admin->phone page both ext set to 1. I have admin->ext1 enabled and registering with asterisk. I have admin->ext2 disabled. I get both lines active and can call out from either one. Steve _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Darren Wright wrote:> Has anyone gotten call-waiting to function on the 4 line SPA-841? > I've seen some documents that say it can do it, some say no way. > > If yes, can you share configs / SPA-841 settings? > > If no, did you work around it? > > > I can call out just fine on all 4 lines, however, if I am on the line, > another call coming in does not ring the 2nd line...it just goes to busy > / VM. > > -Darren > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >make sure incominglimit=1 is not set. It turned out to be my problem. Steve