similar to: call volume

I am getting the following message when trying to lookup up a number via Dundi: Feb 1 13:39:24 NOTICE[20146]: pbx_dundi.c:1309 update_key: No such key 'office.pbx.bluegrass.net.pub' for creating RSA encrypted shared key for '00:a0:c9:55:91:89'! I have created keys on each box with "astgenkey -n office.pbx.bluegrass.net" using the host name for each box of course. I

Below is a snipped debug on our PRI. We are getting number only for the CallerID but the telco says they are sending us Name and Number. We are getting the Name in a second frame but Asterisk is not passing it to the device it rings. The message below says "Presenation allowed of network provided number" which leads me to believe Asterisk thinks it should not be displaying it. Can anyone

Here is my file to parse and load extensions. No wise cracks about my code.... DB.php is the Pear DB module. (pear.php.net) <?php include('DB.php'); $db_host = ''; $db_name = ''; $db_login = ''; $db_pass = ''; $db_table = 'extensions_table'; define(DBINFO,"mysql://$db_login:$db_pass@$db_host/$db_name"); $db =

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir Cohen Sent: Sunday, October 16, 2005 2:59 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] No Audio from Console but mpg123 from shellworksfine. >One possibility is that the volume is set to 0. aumix can be handy here. Does

Anyone know what has happened to the local calling guide? http://members.dandy.net/~czg/search.html -Jonathan

Hello list, I know this has been brought up before but I dont think there was ever a final answer. Is it legal in the US to modify asterisk to show the CID information that was received as blocked ? Thanks. Dovid p.s. Sorry for the poor typing format, it was written from a mobile phone. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam

Good morning, I have a Polycom 601 with two side cars. I created a list of contacts in XML and it shows up on the side cars exaclty how I set it up in the XXXXXXXXXXXX-directory.xml file (in the order that I wanted it etc.). However when I hit the directories button and then contact directory I see the list in alphabetical order based on the last name. I want it to show up in this list as well in

Pardon my ignorance, but I was hoping someone could clear up something for me. - For a few POTS lines, digium has a single port card for that, or a T1 card to a channel bank. - For 10 or more lines, digium has a T1 or E1 card for that too based on PRI channels - For 100's to 1000's of lines, I suspect a soft-switch is in order??? A traditional phone company will sell: - POTS lines for

Why is what he is doing different than having the fax machine on a Sipura ATA? Just because both those ports are on the pci card that doesn't make them not Voice in between....if I'm wrong....eh...oh well.... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of C F Sent: Wednesday, September 28, 2005 9:45

My TE411p does not seem to like to have two PRIs from different telcos (span 1 and span 2). I can get one working, but not the other. However, if I use vpmsupport=0 when loading the wct4xxp module, they both work. But here is the problem, vpmsupport=0 disables the on board echo cancellation. Any ideas? BTW, here is zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs bchan=1-23 dchan=24

I'm posting here in case anyone else runs into this and needs some help. I'll probably update the voip-info Wiki pages on Toshiba integration in a bit. Asterisk 1.6 makes things a bit easier than what is on that page. I'm integrating an Asterisk server with a Toshiba Strata system at my office. Right now, it is driving some VoIP phones (Cisco ATAs with analog phones plugged into

Hello Everyone, I must deploy an asterisk system that can support at least 500 pstn outbound calls. It's a challenge as it's the first time i'm gonna build such a large system. I want to have your advice on hardware, software and so on . What i have in my plan is a cluster of servers with quad PRI cards. I will appreciate your advice. Thank you all . --

I'm getting these messages every 7-10 seconds. -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP '532' at x.x.x.x port 56988 expires 60 -- Registered SIP '529' at x.x.x.x port 51444 expires 60 -- Registered SIP '529' at x.x.x.x port 64044 expires 60 -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP

Our provider gives us four PRIs as a trunk group hunt group. Meaning, the provider's switch will cycle through B channels in span 1, 2, 3, ... until it finds one that is available. I have moved spans 2-4 onto another machine. But we have one remaining box with a PRI full of calls and I don't know what to do with them; the box is failing, but dropping them by simply yanking the PRI is

Anybody have suggestions on having a 56K dialpool and VOIP connections with an Asterisk box over the same set of PRIs? We've done the PM3 with PRIs for just dialup, but are looking for a way to integrate our Asterisk box and move our voice calls onto the same PRIs. Ian -- Ian White Victoria Free-Net Association email: iwhite@victoria.tc.ca http://victoria.tc.ca/

Hi All, i would like to know if anyone has done or having idea regarding PRI terminations in asterisk. i have a requirement where i need to support 80 PRI in one machine i have found a machine which have 10 PCI slots available now i am thinking of arranging 8port sangoma card in this pci slots so i can arrenge 10 card in that. is it possible to run system like that ? is it good idea , can

How does one go about connecting Asterisk to a Meridian PBX to handle voicemail? I have a customer who is out of capacity on their voicemail system (which connects to their meridian via several FXS cards) and I would like to see if I could use Asterisk to handle their voicemail. -Jonathan

Hello, I have a crossover PRI(Asterisk server to PBX) and a regular telco PRI T1 line and currently have echocancel=yes and echocancelwhenbridged=yes on those spans in zapata.conf. I was discussing CPU load with another Asterisk user and he mentioned that PRIs don't need echo cancelation and that turning it off will reduced CPU load on the server. I checked many sample configs and the

I've got a nagios plugin making sure the * box is up, but I would like to do more than that. I need to make sure the PRIs connected to my box stay up and I need to make sure calls are not failing for any reason. Are there any * monitoring packages like this? -Daniel

I currently have a single PRI however we are getting a second PRI, and the provider (qwest) wants to know if our PBX supports GSAS (they say its a redundant d-channel technology but searching on google for GSAS reveals less than nothing). I've set something similar up before on a cisco 5350, where if one of the PRIs fails, all of the calls destined for either PRI will be routed down the one