similar to: Problem with IAXy

Does anybody know why Digium S100I IAXy was discontinued? -- #Joseph

For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy

Hi, What noise should I expect to hear once I've plugged an IAXY into my network and connected to Asterisk? I suspect I should hear a dialtone? I'm not sure if I have a faulty device or have a configuration issue. Currently,it is making a seriously strange noise - machine gun like with static. Any comments appreciated. Thanks, Conrad

I'm having a problem with my IAXy not always connecting to my Asterisk box. When I pick-up the phone plugged in to the IAXy I get a busy signal. I have to hang-up the phone and wait a few seconds after the orange LED goes out and then try again. When this happens I don't see any connection attempts in the Asterisk -r output. When I do get the IAXy to connect to Asterisk I get a

I've got a single IAXy installed in a little office nearby and got a call from someone on site a finew mintues ago. Apparently they couldn't make a call on that extension. They'd pick up the phone and get nothing; no dial-tone. Running "iax2 show peers" showed the unit still registered and I could ping it too. Didn't try to call it while it was doing this; sorry. The

Hi, I have just discovered (a year after it was implemented) a possibly undocumented incompatability between IAX in Asterisk 1.4 and any version of Asterisk pre-March 2008. It seems an AST_CONTROL_SRCUPDATE frame type was added (in March '08), but no mechanism to negotiate whether it can be sent to the remote end, so if a "new" IAX endpoint sends it, and the remote end ignores it,

All, I am very new to pbx hardware and equipment and any help will be greatly appreciated. I am now the proud owner of a TDM422p and Iaxy/S100I. The server is running debian testing so I first installed the asterisk deb package. To get the zap modules, I compiled zaptel-1.0-RC2. After some configuration, everything worked as expected. Then the server crashed -- locked up hard. Nothing in

Hello, New subscriber here. I noticed that the FTS index is not used in compound searches. Is this expected? Tested in 2.0.0 and 2.0.8: . search BODY "waldo" * SEARCH . OK Search completed (0.000 secs). . SEARCH CHARSET UTF-8 OR SUBJECT "waldo" FROM "waldo" * SEARCH . OK Search completed (1.768 secs). . SEARCH CHARSET UTF-8 OR SUBJECT "waldo" BODY

Can anyone recommend a company that does professional Asterisk recordings for things like IVR, greetings, MOH, announcements, etc? Thanks, Waldo

I'm looking for an inexpensive way to connect 20 analog phones to asterisk. I could get a bunch of Linksys or Sipura boxes but was wondering if there is a more cost effective way? I came across the Mediatrix 1104 and even the Mediatrix 1124 but that comes out to be almost $100/port. I might as well buy inexpensive IP phone. Does anyone have any suggestions? Thanks, Waldo

Two asterisk, one in a 2.4.x and another one in a 2.6.x are connection ok using IAX, before i upgraded one of them (the one with 2.6.x) Trunk was working ok. Since i upgraded the one that its now 2.6.x, i m getting this message: chan_iax2.c:5067 socket_read: meta trunk cmd 1 received, I only understand 0 (perhaps the remote side is sending trunk timestamps?) ..and no sound comming from the

Hello list, We have some kind of a problem with our Asterisk installation. We want to be able to publish different caller id when placing outbound calls through the PSTN. We have Asterisk with TE410P and T1 from FDN Communications. The problem is that all our outbound calls show our main number, regardless of what we set with SetCallerID, even using CallingPres with all possible

I'm planning on setting up some remote agents and before doing so, I did some simple PING tests to measure latency. The average latency I got was 250ms. Does anyone have experience in terms of quality of calls when there is such high latency? Can anyone comment? Thanks, Waldo

I place a call from an IAXY to an IAXY device. INitially the calls show in the output of "show channels". Then after a few seconds the "show channels" command shows 0 active channels even though I am still talking on the channels. Any ideas on this? THanks, Jerry

John Novack wrote: >And the only IAX2 box made is the Digium one, with it's current shortcomings ? >From reading through the archives, it seems there is currently no way to reset to factory default, no >written MAC address on an individual box, and some other instabilities requiring frequent resets. Yeah, there's the rub. Dunno if it's worth it, I'm willing to give it

I'm wondering if anyone can recommend one over the other. I'm mostly interested in running open source solutions, so I would prefer if your recommendations are within the open source arena. Basically, I contemplated the idea of using SER as a NAT Helper and possibly as a SIP server for a portion of our user base. We prefer to have Asterisk in the mix because of the additional

If you ring into * and leave voicemail It does not reset the line Any ideas would be appreciated Regards Mick

I am the tech coordinator in a small public school in rural North Dakota and all of last year I ran Samba on redhat 8.0. I had XP machines that used Samba as the PDC. Worked fine. But now I am getting some XP home machines that cannot log on to a domain. That's okay, because I am determined this year to use solely redhat. In fact, I put the partitions down to 5 gig for Windows and

Hi all, Assuming 1.0.7 is the latest stable version, how/where can I find out the different CVS revisions available and a description of what has been patched/updated in each CVS revision so I can decide whether to leave my 1.0.7 installation as is, or if I need (or think I need) to patch it with a CVS version? Thanks, Waldo

Hi, I've got an IAXy, and provided it with connection data - unfortunately didn't provide a fixed ip address, but left with dhcp. Everthing went fine, and I could work a while with it. After a restart of IAXy, it didn't negotiate a new IP address, nor used the old one. I even restarted the DHCP server and cleared its cache. No success. I went to another office with a different