similar to: Sirrix bri card:killing the machine

Hi all, How are things going ? Is there a way for me to individually identify each BRI channel on the Sirrix quad BRI board. The reason I ask is because our client uses the "Asterisk Flash Operator Panel" to monitor its external lines and transfer calls from the lines to the various SIP phones. The "Flash Operator Panel" requires that we set a static value for each line or

Hi guys, How's things going ? Got a bit of a weird one here that I've been unable to solve. I have a Panasonic PBX linked to a Sirrix Quad BRI card that is running in TE (ptp) mode in a Asterisk box - this then links through Internet to another Asterisk box via IAX2. When a user on the Panasonic PBX system dials the extension of my Sirrix Asterisk box, Asterisk answers and says

Hi guys, I'm running a Sirrix PCI4S0 quad BRI card in a box with Asterisk CVS-HEAD (20050614). Something I've come across is that with 'echocancel = yes' in /etc/asterisk/sirrix.conf the echo is unbearably loud - so loud in fact that the echo distorts. To remedy this I've set 'echocancel = no' and disabled the echo cancellation. With the echo cancellation disabled

Hello! I am selling hardware I have been using in various Asterisk test installations. If you are interested in buying all or any of the following items please reply off list. I got a few * X100P clones * Sirrix PCI4S0 ISDN BRI cards (+ 1 Sirrix S0 voltage/power supply) * 1 Polycom Soundpoint IP 500 (+ Plantronics headset) * Conrad HFC-S cards to give away. Some of the pieces are unused,

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

hello list, i have a problem regarding the synchronisity (clock source) when using multiple cards. e.g. when having connected one PRI port of our TE410P to the telco, i need to have the analog card like the TDM400P or a B410P synchronous to the clock of our telco provider. otherwise faxing on the analog cards does not work or i get cracking noise or even hangups on my BRI lines, due to bit slips.

Good day all Is there someone who's got a sirrix 4 port working in NT mode I got one working good in TE mode. Apparently I must add 8 jumpers in make the cross cable a straight cable But what about the sirrix.conf? Do I just change the mode from TE to NT? Please Help or advice? Thanks Altus

How do I test if the card is working or not ? Is there something that I can do to get a response from the card ? Ive put the card in, installed drivers ect but can't dial out and can't see a response when I try dial in from external number. Any ideas ? Thanks Shaun --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.857 /

Hi All, I currently run asterisk in our office (in Japan) and use a cisco PRI gateway for connection to the PSTN. I would like to setup some more systems for our smaller offices (in Japan) that would use BRI and preferably using a PCI card in the asterisk box and not a seperate Cisco gateway (expensive). HOWEVER, Japan has this INS64 protocol for their BRI lines and im not sure what cards

Hi, folks! Sangoma has an informal user survey up on their home page (at http://www.sangoma.com) asking if people would use their A500 card for North American BRI, if it were supported. I encourage anyone with an interest in voice BRI in North America to vote; this information will be used for deciding whether to make the investment in developing a National ISDN driver layer for it. Benefits to

Hello all, I wonder to have some feedback on using ISDN BRI Cards with Asterisk and the Echo problem. I have tried a simple BRI card with i4l driver and encounter huge echo problem. I have tried to solve it with a Sw chocanceller without success. What I'd like to know is wether some of you have used other BRI Cards (I have seen reference to Eicon cards on this list) and if the echo

Hello I want to setup an Asterisk in several offices with 4 BRI ISDN. I am looking for recommendations on hardware. Criteria would be ease of setup, reliability and cost. The Eicon 4 BRI cards seem fairly pricey. Shame Digium don't do a ISDN BRI card. Angus -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I would appreciate some advice on the following: how does one use a single BRI port HFC chipset based ISDN cards with the latest DAHDI, libpri and Asterisk 1.8? For Asterisk 1.4 I would first install mISDN & mISDNuser and then build Asterisk 1.4. Now I noticed that Digium's HFC chipset based B410P is supported by the latest DAHDI & libpri but reading the source of the

Hello, I'm looking for an ISDN BRI-U interface for use in the US. I'm primarily interested in using the BRI as a trunking interface into the PSTN with Asterisk. Naturally, cheaper is better. I currently use a Nortel Norstar system with BRI-U trunks, and really like the digital PSTN interface. Would really like to replace the whole mess with Asterisk but want to keep the ISDN trunks.

Hello everyone. I need a BRI ISDN card that works in Romania. I already have one of the "Cologne HFC-S" PCI cards and it doesn't work right, it's junk. I get waaaay too much echo using it. I'm now "shopping" for a better card. Can anyone recommend me a card that "fits" the following: (a) Costs less then $1000 / 750 euro (b) Has one or (preferably) two

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what

We're using the Quad-BRI card from Junghanns.NET with corresponding drivers (bristuff 0.0.2). The driver tries to patch asterisk libpri, which fails for current version. Anyone got an idea what'S the latest version of asterisk / libtri usable with the Quad-BRI Card? Thanks, Martin

Dear all i am using Fedora Core 2 . i have Planet BRI TA with HFC chipset ( hisax ) i can easyly connect to internet using BRI but this card is still not recognized by asterisk i am using i4l driver . some people suggest i should try bristuff from junghanns.net any ideas ? Thanks and Regards Talha

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

Hi, I'm asking to myself what's the main problem in using cheap BRI cards (30-60Euro, as these HFC-based) vs. great active cards as Eicon DIVA. Any help? -- Mimmus