similar to: strange dial problem with polycom 501

Any Polycom gurus out there? If so, I have a few config file questions. First off, does anyone have the daylight savings time rules written for this Sunday's big change? Secondly, if there any way in the config file to tell the phone not to display the number of missed calls? I don't mind it keeping the missed calls list, I just don't want that running count. Lastly, I am trying

Hi all. I just installed bunch of IP450's and everything went well and my customer is happy.... except that they are unable to transfer calls to other extenstions. They can dial them directly just fine. However, when the user is in a call and presses the transfer soft key, they get dial tone, and start typing the extension, say 1008. But by the time they get 100 typed in, the phone tries

I'm replacing a SoundPoint IP 600 with a SoundPoint IP 650. I attempted to simply reuse the existing config files for the old phone on the new phone, but the new phone would lock up on the 4th digit when attempted to dial out certain numbers. So, I downloaded the newest firmware and config templates from Polycom, and attempted to migrate the settings. Seems I'm missing something from

Hi All, I'm not sure if this is related directly to asterisk or not but on my Polycom 320 when I try to dial a number smaller than 4 digits I get an error on the phone saying "Enter more digits". The dial plan section is listed below. <dialplan dialplan.impossibleMatchHandling="0" dialplan.removeEndOfDial="1"> <digitmap

This is a dialpaln issue. I solved the same problem recently. For 4 digit extensions you need to append the dialplan statement in the sip.cfg configuration file as follows <digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2 -9]xxxT|1xxxT" dialplan.digitmap.timeOut="3"/> Michael > I am not sure what I did but blind transfers do not

I am having a problem with some Polycom 601 phones. If I dial without picking up the handset or selecting the speaker I can dial numbers that are any lenght. But if I pick up the handset or are using the speaker I can only dial numbers that are 8 digits. When I dial the 8th digit it dials immediately. Obviously this creates problems when I am dialing long distance numbers or anything that

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

Hello, I have a mixture of Polycom SP IP 500 and 300 phones. I have been reading through the administration manual to try and solve this problem, but I do not seem to be able to find the answers to my question. I figured I would ask here and see if anyone has some suggestions. The problem is kind of annoying. After dialing 4 digits, the phone seems to pause and miss the 5th digit, often

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

I'm running Asterisk 1.2.8 with Polycom ip501's xten softphones The only problem I'm experiencing is the following: I can't seem to get blind transfers to work with my Polycom 501 phones Either through the feature code or the soft keys. Feature code blind transfers: I set up a feature map in features.conf like this: blindxfer => # This works for all my

Calling all Polycom gurus: I am using Polycom IP601 phones with Asterisk 1.4.21.2 In all Polycom phones, I set the following in sip.cfg. <dialplan dialplan.impossibleMatchHandling="2"> </dialplan> (I leave the digitmap unchanged because I thought setting impossibleMatchHandling will ignore the bitmap) ...so that I could dial any number by entering a variable-size

Hello All, I have some Polycom IP 500 phones that I would like to have configured for direct dialing to our voice mail system. So far I have been unable to get the hard button labeled Voice Mail to connect to Asterisk without first passing through the message center prompts. I have followed all the Admin Guide instructions regarding the phones .cfg files and using

I'm working on replacing a SoundPoint 600 with a 650. I need to merge these two sets of digitmaps in the polycom sip.cfg file, because the 650 locks up when I try to use the digitmap from the 600. I've included the default digitmap from a 3.1.3 RevB polycom release. I'd like to merge these two digitmaps, but I don't want to reintroduce the lockup issue I was having with the

I recently had a bear of a time getting a Polycom Soundpoint 500IP up and registered.. Now that its registered I ran into a problem w/ the dialplan. Needing to dial x101 I'd dial 10 - then get a fast buzy.. Also making a local call - dialing 95551212- would give me a fast busy after the 7th digit - so 9555121.. Same w/ LD calls... This dialplan really got me down as I didn't find

> >> Jason Brown wrote: > >> | Anyone have experiece with polycom phones? > >> | > >> | I am experiencing a really weird problem. In an office > where I have > >> | the following extensions: > >> | On the Polycom phones, when I want to dial from extension > >> 100 to any > >> | extension 120 or above, or dial out, it

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

via google, I found the reference regarding digit maps for the Polycom phones: http://lists.digium.com/pipermail/asterisk-users/2005-January/082884.html But I don't see any instruction for prepending digits to the number dialed. Does anyone know how to prepend a digit to the number dialed (from the Polycom side, not Asterisk)? I can do this pretty easily on a Sipura. i.e. Say I want to

Hi BK - >> The blind transfer does not work. >> >> The way we try to blind transfer a call: >> 1. answer the call >> 2. press transfer >> 3. press blind softkey -> the display shows "Blind transfer to:" and >> cursor is in the second line >> 4. enter the number -> when we enter the second digit of the number >> the

I'm using Polycom Soundpoint phones and I want to use some extensions beginning with # for features setup. I'm getting the fast busy "can't match it" signal. I want to match #50 for call forwarding, for instance, and #505551212 to set the call forwarding number and turn it on. I have tftp set up and sip.cfg contains the following: <dialplan

Sirs, According to RFC 2705 (MGCP), these are the parameters that are used in the transactions: ReturnCode, Connection-parameters <-- DeleteConnection(CallId, EndpointId, ConnectionId, [Encapsulated NotificationRequest,] [Encapsulated