similar to: Modem Connection from TDM card to TE4xxP card

Helo, I have problem with Digium TE110P connected to CISCO 3640 (port on NM-HDV-2E1-60) wth PRI E1 link. I use CISCO now for testing but when I tried with real PBX problem was exactly same. I have this messages in Asterisk conole and log sometimes: NOTICE[1115] chan_zap.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Usually 2-5 such messages in series, can be repeated after 10

Hello to all I'm using asterisk 1.4 and dahdi. I had everything working fine, and I could place calls through my R2 channel. But now the channel is always "RED" and Im getting this error message: TE4XXP: Version Synchronization Error! Here is my chan_dahdi.conf------------------------------ [channels] language=en context=incomingr2 signalling=mfcr2 mfcr2_variant=ar

Hello, I have some ugly numbers given by zttest for ztdummy on an AMD64 box running linux-2.6.15 compiled for Athlon64. linux-2.6.15, zaptel/branches/1.2 r900, jiffies ./zttest Opened pseudo zap interface, measuring accuracy... 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586% 99.975586%

Guys. I have an issue with a te110p card and also some tdm04b cards on the same system: Zttest returns this for the tdm04b cards: [root@mollendo ~]# /usr/src/zaptel-1.2.4/zttest 38 -v Opened pseudo zap interface, measuring accuracy... 8192 samples in 8191 sample intervals 99.987793% 8192 samples in 8192 sample intervals 100.000000% 8192 samples in 8192 sample intervals 100.000000% 8192 samples

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

I have some DID numbers that come into Asterisk via PRI, then connect to a Panasonic DBS PBX via PRI. Outbound calls from the PBX go out via PRI to Asterisk, then out to the Telco's PRI. The sync LEDs on my PBX show that it is synced to Asterisk via the PRI. I have users complaining about random hangups. What is the best way toi approach finding the issue? ref: zttest looks good. ./zttest

Hi, I've been playing with a TE120P on Asterisk 1.4.18 with zaptel 1.4.9 and I've ran into an issue. After a call placed any DTMF tone causes the server to lock up entirely. Calls placed work just fine (except for a problem with echo cancellation). The phone registered to the server is a Linksys SPA-942. I am seeing in zttool some IRQ misses, but it never seems to go above 74 (below).

Another request make me test my t1 card, which has no quality problems, but all that I get is: [root@SIP2-MI zaptel-1.2.1]# ./zttest Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

I'm trying to set up a Linux-based dialin server on our company network. I'd like to have PPP authenticate using winbindd, if possible. I feel like I've almost gotten it to work, but I can't quite get there. Files: /etc/pam.d/ppp: #%PAM-1.0 auth required pam_nologin.so auth sufficient /lib/security/pam_winbind.so account required

Hello, 1-2 sec pauses happen while * plays (streams) messages/prompts. We get reports about that from users and experience it ourselves randomly. Cannot reproduce it for debugging though, so need to figure out some other ways to fix it. 1. It's not silence recorded within or pauses between audio files 2. It's not load related - can happen with no load at all 3. We use decent boxes - dual

I wrote a nice detailed post before, and then my mail program lost it for me... so here I go again... I've followed the same process with three different versions of asterisk, my local source copy from about 1 week ago CVS, current CVS from about 24 hours ago, and version 1.0.1, all three versions had identical results: I compiled/installed libpri, zaptel, asterisk I copied config file from

Hi, I have a couple of dual Xeon 3.0GHZ machines. Both have 4GB of memory. I''m trying to get them to boot Xen stable/2.0.6 (have tried 2.0.5 as well). Because they are remote, getting error messages can be tricky. When ''noreboot'' is set in grubs conf, they stop after the ''scrubbing free RAM'' message. If I remove the noreboot, I''m told a

Hello everybody, I'm looking for some insights on reproductible lockups with this server so please bear the long description that follows: Installed the 4.0 Centos than yum updated it so it results a 4.2 Centos fully updated. During the instalation and update there were no cold boots. That's important because if (updated Centos or not) you cold boot the server it stucks at the

Hello, Here is the situation. There is a machine with 3 intel gigabit card, 2 of them on PCI-X and in bridge, the 3rd is used only for management access. The machine is a dual Xeon 2.8GHz with HT. With 2.6.8 kernel from debian (testing) and htb with u32 on, i usually get about 30-40% software interrupts on CPU0 and CPU2, and without htb and u32, 10% less. Now, if I boot with 2.6.17.9 kernel,

Hi anyone have a idea for debug my digium TE405P card ? My zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = fr defaultzone = fr My Zapata.conf: [channels] language=fr context=from-E1 switchtype = euroisdn pridialplan = unknown signalling = pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

I'm trying to install a TE410P this is what happens with compiled zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ this is my zaptel.conf (checked with the provider the values): span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=it defaultzone=it then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : Sep 30 16:12:40 localhost kernel: Zapata

Hi I got the 2nd Gen firmware upgraded on the TE405P. I recompiled after putting in the upgraded board but did not change any conf, but the spans become active but will not come up. I guess I am missing something or are the any changes to the zaptel/libpri software that is required. I cannot find any info about this or does this new firmware only work with latest CVS. I am using 1.0.9 with

I am so fed up with Digium cards. My company first owned a TE410P, I installed it in a Dell server and "enjoyed" its instability (we bought it months before Digium warned about the incompatibility issues). Then we switched to a TE411P for the hardware echo cancellation. Now we want to receive fax (< 20/day) on it and guess what ? Since April 2006 (again a few months after we bought

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI