similar to: Re: [Asterisk-ss7] Asterisk - ss7

Hello everybody, for all of you that have searched for a real fax solution, look no further. We now have T38 faxing. Please contact me for more information. Thanks Michael D. Schelin ShellTel 626-814-2354

When are 'we' going to have this solution Steve? :) You keep talking about it, and we keep asking when it's going to come about. I know myself, SS7 will be a make or break for our continued use of Asterisk. Even if we had some price indications would be good, and/or a timeframe? Don't want to seem pushy, but it's been on the cards for quite some time now. Ben -----Original

I'm making outbound calls by placing call files in the asterisk outgoing directory. At times, the call would be hung by SS7 without even attempting (due to error in the outgoing number). I get the following on console: -- Attempting call on ss7/9297210213 for s at croom:1 (Retry 1) -- Sent IAM CIC=22 ANI=9134904821 DNI=9297210213 RNI= -- SS7 hangup 'SS7/callserver/22'

Hi all, I'm being requested to deploy an?IVR service?using SS7. I've deployed Asterisk before using ISDN connection, but never with SS7. Can anyone explain me the different between using ISDN and SS7 ? What need I do now to change to use SS7 ?. Many thanks, Giang -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Would just like to inquire if anyone here has a setup of asterisk to send traffic to AS5400 connected to an SS7-PRI.? this is more of a AS54 question, as i've been reading and i always stumble upon PGW2200 as a requirement to handle SS7 signaling on the AS54. Has anyone able to send calls from asterisk to an as 54 with SS7-PRI without PGW2200? TIA Regards, Nhadie --------------

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

>Freddi Hansen wrote: >> with boards from Aculab, we are replacing Aculab boards with Digium >> boards BUT we would need more >> Digium boards IF we could use both Digium and Aculab cards in the same >> server. The reason being that >> TE410P doesn't support SS7-ISUP so we continue using only Aculab cards >> in the servers that must support >>

Hi, Does Asterisk support SS7? Google shows an old new post from Feb. 2002 stating that OpenSS7 would help add SS7 support to Asterisk, but presently OpenSS7 seems to be dead and I can't seem to find anything about it at Asterisk or Digium's sites. What happened? -- Regards, Tais M. Hansen ComX

Hello.. I have a customer who wants to connect 2 PBX's over IP.. The setup should look like this: [PBX] <-- SS7 --> [Asterisk] <-- IAX --> [Asterisk] <-- SS7 --> [PBX] Since there are no SS7 cards , I was thinking at a way of carrying the E1 data as bulk...Can I do that ? How ? Is possible a scenario like this ? I'm thinking of IAX because I don't

Hi, there are still some questions to be answered by OpenSS7.com in order to decide, whether E400P-SS7 is a good choice for the asterisk SS7 support. In the meanwhile I'm also in negotiations with another manufacturer (whose name I currently may not tell due to a NDA) of SS7 hardware, who gets likely persuaded to offer a cheap SS7-PCI-card which would be suitable for asterisk. Asterisk users

We'd be more than willing to test :) Our PRI provider has been trying to push us over to SS7 for ages. So we'd be very interested in assisting you. Ben -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Underwood Sent: 12 January 2005 12:49 To: Asterisk Users Mailing List - Non-Commercial Discussion

Hello, Is it possible to transfer ss7 signaling over an FXO interface. I need to setup an ss7 test system composed by two Asterisk based IP-PBX systems with anlog interfaces only (FXO and FXS). I want to know if it is possible to connect the two IP-PBX as following: - FXS interface in PBX1 -----------------> connected to -----------------> FXO interface in PBX2 =============>

hi some time ago, I asked the list of a good book for learning ISDN and SS7. I don't need to know how to write a channel driver or something; I just want to know more about the possibilities and what's really sent back and forth. I was told the book "ISDN and SS7: Architectures for Digital Signaling Networks" by Uyless Black (ISBN 0132591936) was a good choice, but this

Hello. I am new to this forum. If this issue has been discussed already, please inform me, but my STFW have indicated that it has not. If SS7 were available on * would it make commercial sense to use it? There are case studies on the web (courtesy of the Death Star :->) for ISPs with 10,000+ subscriber lines showing clear cost savings in transitioning from PRI to SS7 controlled IMT. My

Hi, Is this card the same as the T410P, after all, it's made by Digium. There's one prior reference on the mailint list[1] but it didn't answer the question. There was also an SS7 status report[2] last June but it's doesn't seem to have lead anywhere either. There was post saying an SS7 release was immenent last September[3], but then silence. Any info anyone would like to

Hi, I have read about SS7 recently and learnt that it is a signalling protocol used in PSTN for call management, setup, etc. The thing that I don't understand is how SS7 plays a role in VOIP. When I make calls between landline and Asterisk via PSTN, I don't need to do anything with SS7. Is it because the SS7 signalling is already done by Asterisk already? From the prespective of

hi can someone recommend a book about ISDN and SS7? I've been hacking asterisk for a while, but it'd be good to get some better background within things... thanks roy

I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0 on FC7 all went okay. using sangoma a104dx on both machine. I followed the write up on http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7+setup I have the cross over cable between them. however, wanpipe shows connected but the signaling link does not align. i have my configs for host A ##wanpipe1.conf [devices] wanpipe1 =

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk

I have two questions for the group. #1 - I'm looking to use some GSM SIM cards with my Asterisk PBX. Can anyone recommend a gateway? I need about 10-15 SIM slots. #2 - I'm also looking to connect Asterisk to an SS7 signaled DS1 (24 channels) for inbound and outbound voice calls. Can anyone offer any suggestions for cards to use there?