similar to: Trying to do very simple Zaptel Config. NO LUCK!

Two problems, possibly related: Here's the configuration...my Asterisk box has a TDM844B in it; port 1-4 are FXS, 5-8 FXOs. Here are the config files: /etc/zaptel.conf: -------- fxoks=1 fxoks=2 fxoks=3 fxoks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 loadzone = us defaultzone = us -------- /etc/asterisk/zapata.conf: -------- [channels] language=en usecallerid=yes hidecallerid=no

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is there any way to solve, is it a bug thanks

Hi All, I have the following scenario, it may already have been answered elsewhere, but I cant find the solution. I already have a PBX and would like to start implementing asterisk. I have ordered a 4 port card from the asterisk store (2 port FXS and 2 port FXO) and am waiting for it to arrive. I do not want to plug my incoming lines into my FXO ports yet as not all the desks have IP phones

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

Hi I have installed 2 fx0 cards into a machine 1 for pstn (out) and the other for pstn (in) However I can get the first card (pstnout to work fine) I have swapped the cards and both work I am also unable to make outgoign on the second card ztcfg -v shows r2d2:/etc/asterisk# ztcfg -v Zaptel Configuration ====================== 2 channels configured. My /etc/zapdata.conf file # fxsks=1,2

I have a TMD400 card installed in a PC with one fxs (installed in slot 2) and two fxos (installed in slots 3 & 4).? fxos work fine but I am unable to get a dial tone for any devices connected to the fxs.? I have correctly connected the power supply to the card and I have even tried moving the card from slot 1 to 2 on the board. Below is from the console when I try to route a call from FXO on

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

I have been working on integrating some FXS ports into my dial plan delivered via a channel bank and testing with an analog handset. The receptionist is on Extension 700. All other SIP phones are 7XX. >From a SIP phone I can dial 700 and all other extensions. >From the analog handset I can dial any other extension but not the 700 number. Weird? Yep. The CLI does not show any dialing when I

Good day all I've tried my iax conf and I'm struggling.So I want to know If someone else got this working and if they can pleas send my their configs I have to asterisk server,in different tows,both offices connected wit a direct line so both servers are on the same network running SIP.Each town got different extension register to each sever.Town A=100+ town B=200+ How do I get town A

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;

I am blessed with this user forum and able to set my Dev-PCI Digium card working fine with the Asterisk server of mine (i)But today i just wanted to know if someone can help me to set X-Ten Lite to call PSTN line using my FX0 Currently , I am able to use X Lite to call another X lite user locally (LAN) I also has attached my setting together Thanking you all in advance --------------

Hi.. I am about to replace my aging Nortel Venture system with an Asterisk system and 6 Polycom IP 501 phones, and a couple sipura 841's for less used areas. We have 3 phone lines here. One is SBC, one Vonage, and one Voipjet... One hangup is that I can't figure out how to pass through a voicemail waiting indication from SBC. This is important because my wife and her family all

I am trying to setup a couple of virtual pbx's off of my one may asterisk box. So far I have been able to segment most everything via the Dial plan. My only question/problem has to do with the # Transfer function. I had set up # Transfers prior to segmenting the dial plan, and I cannot remember how I was able to specify which context to use when the user presses #. I haven't been able

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

I'm going to install asterisk with four digium cards. Can anyone mention a brand that carries boards with 4 compatible pci slots? Thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Hi, I have been trying to workout how to use the call pickup. So Far, I have the following in zapata.conf [channels] signalling => fxo_ks context => local pickupgroup=1 callgroup=1 channel => 1-3 When I dial *8# all I hear is busy tone. What have I missed? thanks Jay.

Is there a way for me to set my outgoing callerid string so that all callers outside of my pbx see our callerid string as company name main company number but callers inside our telephone network see extension holders name extension number? In looking at the references it looks like I can do one or the other but not both. Does anyone know how I might accomplish this? Thanks for any