similar to: Monitoring Sirrix quad BRI channels

Hi guys, How's things going ? Got a bit of a weird one here that I've been unable to solve. I have a Panasonic PBX linked to a Sirrix Quad BRI card that is running in TE (ptp) mode in a Asterisk box - this then links through Internet to another Asterisk box via IAX2. When a user on the Panasonic PBX system dials the extension of my Sirrix Asterisk box, Asterisk answers and says

Hi guys, I'm running a Sirrix PCI4S0 quad BRI card in a box with Asterisk CVS-HEAD (20050614). Something I've come across is that with 'echocancel = yes' in /etc/asterisk/sirrix.conf the echo is unbearably loud - so loud in fact that the echo distorts. To remedy this I've set 'echocancel = no' and disabled the echo cancellation. With the echo cancellation disabled

I'm pleased to announce that Flash Operator Panel 0.26 has been released! FOP is a GPL'd switchboard type application for the Asterisk PBX. It runs on a web browser with the flash plugin. It is able to display information about your Asterisk box in real time. It is included in FreePBX, Asterisk@Home, DeStar, startShop, and several other projects both free and commercial. You can grab the

I deleted the config examples in the op_buttons.conf folder for how to set up the meetme representation All of my other representations work fine except for the meetme meeting rooms (I know they worked in the past) and the meeting rooms themselves actually work fine just not the representation. Can anyone take a quick look at theirs and tell me what I've done wrong.

Hi. I am using the Flash operator panel 0.24 and it works, but I don't see the voicemail icon when I have incoming voicemail. In the op_buttons.cfg I have the following setup: [SIP/100] Position=2 Label="Office tel. 1" Extension=100 Icon=1 Mailbox=100 I've tried to google on the subject, but have not found any answers. I've tried Mailbox=100@full also. (full = the context

Is there anyway in asterisk to figure out how much time an agent has spent on the phone? I know I can see total time for a call (inbound or outbound) but where/how do I view queue stats?

Hello users! Recently I read that AgentCallbackLogin is going to be deprecated soon. Wanting to set up a few callback type queues, I set them up as suggested in queues-with-callback-members.txt. I was able to set the queues up completely this way, however, I'm trying to use Flash Operator Panel (aka AsterNIC) to monitor the agents' login status. FOP monitors their status if I call

Nobody seems to use txfax or does nobody have any problems with it? I have sent mails to most lists and get no reply. I cannot get a fax to go through with txfax. I use a call file as a test and all I get on the receiving fax is a bunch of vertical lines. my call file is: Channel:Srx/gout/4658158 MaxRetries: 0 WaitTime: 20 Application:txfax Data:/etc/asterisk/testfax.tif|caller|debug FYI

If a user calls and hangs up before the destination party rings, than the in-use flag remains set! This is one case, but maybe there are many other cases. I have created a number the user can dial to reset this flag. However, that is written in the manual!!! Who reads a manual anyway!!!! I want to make to reset all in use flag with a program. Has anybody done it, or has a better idea? My idea

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

How do I test if the card is working or not ? Is there something that I can do to get a response from the card ? Ive put the card in, installed drivers ect but can't dial out and can't see a response when I try dial in from external number. Any ideas ? Thanks Shaun --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.857 /

Hi guys, Unfortunately this is still happening I've tried restarting Samba. Users who should be denied access after 21:00 are being denied access at 19:00. Our time zone in South Africa is GMT+2. Perhaps I should set the timezone on the server to UTC/GMT ? Do you think this will help ? Should I then leave the time set to the current time in South Africa ? Or should I set the time to the

More information on my problem below. It seems that users that were only meant to kicked off at 21:00 were kicked off at 19:00. I've checked the time and timezone on the Linux server and all seems correct. I think I've messed up something somewhere to do with Samba and time and Logon Hours restrictions. Please point me in the right direction. Many thanks David Wilson From: "David

Hi guys, Does anyone have any ideas on my questions below ? Kindest regards David Wilson D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 MSN: dave@dcdata.co.za http://www.dcdata.co.za support@dcdata.co.za sales@dcdata.co.za KZN's first and only pure Linux solution provider ____________________________________________________ LinuxBox S.A.: Africa's shell

Hello, Just confirmed this on my end, because of the massive changes that have been made to callerID handling in asterisk 1.0.5 many of the features of the astGUIclient suite will not work on this new version. The latest stable version recommended is Asterisk 1.0.3. We will work on trying to find ways around the new callerID rules that the asterisk developers have put in place and hope to have

Hi guys, I'm really sorry to bother you with this but I'm really battling and can't find any info to solve my problem. Please have a look at my issue below and give me some guidance as to what could be causing it. Thanks in advance. Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413

Hello Guys. I recently contacted polycoms tech support asking if their phones supported XML pushed information to which they replied that only model 600 had a microbrwoser capable of reading dhtml files and such. My question to the community is: is somebody doing any XML info push to any brand of phones except Cisco? How are you doing it? One of the wonders of VoIP should be the means to send

Hi guys, Does anyone know of some decent Samba log analysis software that will report things like user logon/logoff times, computer names etc. ? Thanks in advance. Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 http://www.dcdata.co.za support@dcdata.co.za Powered by Linux, driven by passion !

Hi guys, I use "veto files = /.mp3/.mpg/" etc. on the [homes] share to prevent users from storing media files on a Samba server in the home directories. My client now wishes to make this restriction apply to users who are members of only certain groups. E.g. This restriction must apply to users who are members of the "Students" group and not apply to users in the

Been using mpg123 for moh for the last two years or so. However, when I have * config errors, often times get a endless stream of console messages and need to kill the two mpg123 processes. Is there an alternative to mpg123 that eliminates that issue? I see references in musiconhold.conf relative to madplay, native file format, asterisk-addons, etc. Not sure why the asterisk-addon approach