similar to: Hangupcode == 44

Hi, > Cool, I hope this succeeds. I tried implementing per-test timeouts before, and couldn't get it to work in all cases. The review eventually fizzled out, and I abandoned it. > > Here's that old review: http://reviews.llvm.org/D6584 Perhaps you can cannibalize testcases from it. Thanks for that. I'll take a look. > >> >> I'm e-mailing llvm-dev rather

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

Hello everybody, I would like to know whether it is possible to run Dial and MeetMe commands simultaneoously on the same channel. I am using a C AGI as below but it seems to me that only the first command that is called in the agi is executed. ........... // Pr?paration de la commande pour l'appel du client fprintf(stderr,"%s%s",numtocall," is the number to

Hi, A feature I've wanted in lit for a while is a having a timeout per test. Attached are patches that implement this idea. I'm e-mailing llvm-dev rather than llvm-commits because I want to gather more feedback on my initial implementation and hopefully some answers to some unresolved issues with my implementation. Currently in lit you can set a global timeout for all of the tests but

Hi, we want to access our Amazon/AWS Console using users from our internal samba4 directory service. So we tried to connect to our samba4 via the AWS AD Connector.  Connection (bind) is ok, but no users/groups are found.  Via tcpdump/wireshark we found this query/answer pair: Query from AD Connector LDAPMessage searchRequest(5) “dc=companyname,dc=com" wholeSubtree Filter:

Hello Samba group, I ran into a problem concerning Dovecot LDAP authentication to the Samba4 Active Directory. Background: I want to install a Openchange+Samba4 environment using Sogo, Dovecot and Postfix. I didn't want to use openldap as described in the Openchange documentation, why should I use 2 LDAP databases? Fedora 17, latest updates applied Samba: Version 4.1.0pre1-GIT-813bd03

Hi, I just got my ip500 back after months of waiting. Is there an easy way to get it hooked up to asterisk without [t]ftp servers and all that or is there a quickstart page somewhere? tia r

There was a conversation last night on the IRC channel between myself, Corydon76, citats, and kram on the ability of a call process to access the error (or success?) codes underlying a call. I'm uncertain if anything came out of it, but I'll re-hash here to solicit other comments. My idea: I'd like to be able to get to error codes when a call passes through some kind of action

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

I have an adit 600 with an fxo card connected to a digium T1 card. If I try to make an outgoing call and the T1 cable is disconnected, asterisks returns congested like it should. But, if the adit 600 is connected to the T1 card, the adit 600 immediately "answers" the call even if there are no physical lines attached. I even removed the fxo card and the adit 600 still

I've been reading the Google searches trying to understand how to tie together Adit 600 to Asterisk to provide 2 way service. I'm about blind from reading. I assume, the answer is using MGCP between the boxes. However, the examples I found don't really explain fully enough to know how to modify examples to work for me. I'll have in the ADIT with T1's. There is a CMG and

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

Ok, I've pretty much decided to try the Adit route. Somebody who has experience with these tell me if I'm missing something. I have 15 incoming PSTN lines. T1 is not an option at current location. I want to put in an Adit 600 with 2 8-port FXO boards. The adit will then connect to * via a digium t1 board. I configure zaptel.conf for the T1. What other parts would be needed? How do

On Wed, 2024-03-27 at 12:18 +0100, Pisch Tam?s wrote: > > Others have integrated Azure AD with Samba without the FL increase, > > and > > the key step would be the adprep work, > > Then I will do it without increasing the FL. What do I have to do > with adprep? To (prepare to) raise the domain functional level of an existing domain, after updating the smb.conf and

I'm emailing this as the customer in this case, since my carrier appears to be completely unable to solve this. A brief rundown of the problem: - We have several voice lines going through the ADIT, of course into a VoIP type of arrangement. - Voice traffic will become choppy, even drop calls completely, at random but quite often. Modem calls (which we needed unfortunately) are a joke. -

I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO 8 port cards in the ADIT and a T1 controller card. I have a T1 x-over cable connecting two together. Here are copies of the relevant bits of my zaptel.conf and Zapata.conf Zaptel.conf span=1,0,0,esf,b8zs loadzone=us defaultzone=us Zapata.cfg context=default signalling=fxs_ks group=1 channel => 1-24 My

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

I know a few ppl have those CAC Adit 600's with t400 I can't seem to get my second span up on the T400 connected to the second spand on the adit (A:2) A:1 seems ok Can someone post they zaptel.conf span defintions And maybe a "print config" from the adit 600 cli I think my issue is timing srcs the coding, framing. bld out are all matched thx -------------- next part

Hi, I'm using an Adit 600 Channel Bank with *. I love it and it works really great for my FXS lines. One problem that I have with it (It's really not a problem yet, but it's a potential one) is that I've scoured the manaual for the Adit to see if there's a way to dump out a config file from the bank so in the event of a power and battery failure I don't have to type in the

Hello All, I'm trying to connect Asterisk to an Executone phone system with an analog DID card and I'm hoping someone can help me figure out what I'm doing wrong. The Executone DID card provides battery to the telco, when the telco wishes to dial a DID it goes off-hook, waits for a wink from the Executone and then dials the last three digits on the number with pulse (as opposed