similar to: Dell 1750 & TDM400P - Power

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Has anyone figured out how to power a Digium TDM 400P card in a Dell 1750 server? I opened the server and noticed that there is no access to 4 pin power to power the card. Is there some sort of adapter that I need to power the Digium card in a Dell Server? I see that the 1750 is listed on the Wiki. How have others powered the TDM400P in a Dell 1750?

Hi! I have just bought the X100P and TDM400P cards to install on my computer to implement the PBX. I also downloaded the newest softwares asterisk_ver0.5.0, libpri_ver0.4.0, and zaptel_ver0.7.0) to install on my computer (Red Hat Linux 8.0). All packages are compiled well. When I use "modprobe" to load drivers (modprobe zaptel, modprobe wcfxo, modprobe wcfxs), the first two (zaptel,

I need to ask, to refresh, is the aux power connector on the TDM400P card *only* to power the ringer on any analog phones/devices on the system? Can I still use this board, to "terminate" POTS lines and use all SIP Phones? Due to circumstances, I end up with a 1u server that has no aux power connectors available. I "have to" use this server, so am considering abandoning

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 49 bytes Desc: bullet.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/1dbc7ddf/attachment.gif

No I got confused....yes they are FXO modules with POTS lines coming from bell attached. The only thing I can think of is that since the card supports 3.3v or 5v PCI slots that maybe on a 3.3v slot it requires the other connection all the time because it really does need the 5v and is just not picky about where it comes from. -Jonathan -----Original Message----- From:

Hey all - we have two TDM400P cards in an SMP Redhat9 box, with 4 FXO ports each running thel latest Asterisk CVS. Users connect to this to share POTS lines using analog phones connected to Sipura SPA-2000 boxes. All works reasonably well, except every day (or more) a line will get "locked up". No other way to describe it really -- the line just stops working, so if someone tries

Hi all. I bought Digium's dev kit and a used IBM PL300 PC to try it out in. The X100P works fine, but with the TDM400P I get what I can best describe as 'interrupt noise'... noise whenever I type a key on the keyboard, or when something accesses the disk drive, uses cpu, etc. In my other PC it works fine, no noise and sounds great. But I cannot dedicate the other PC to it.

Hello all We have tested for a mounth or two an asterisk PBX using one T1 channel bank with 24 fxs and one TDM400P digium card with 4 FXO modules. This worked with minor problems, the most notorious being some sporadic static noice or failure in the first FXO module on the wildcard. Now we have a client with 12 pstn lines and 48 extensions and we are trying to deploy an Asterisk PBX server

Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

Hi, I have had this issues for ages but have ignored it, but my handsets get faint background crackle on the FXS port. When I connect the handset directly into my PSTN, it goes away complete, so I am generating this from somewhere in my asterisk box. I get it immediately when the phone goes off-hook and it stays through the dialing and call progress. I can't think of any other devices

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com -------------- next part -------------- An HTML attachment was scrubbed...

Howdy. I've been having trouble finding a fairly modern server that meets the following requirements: - Molex power connectors (don't want to use the Digium FXS power supply) - 4 PCI slots, one full-length (TDM2400P, 2xT100P, additional NIC) - dual power supplies - preferably dual CPUs >= 1GHz - preferably rack-mountable (3-4RU) - CentOS-friendly We'd also like to stay away from

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Considering getting the card pictured here, http://www.voipsupply.com/product_info.php?products_id=2419&searchid=341962, and was wondering if anyone had any experience with those in a 2950's case. From the picture it looks to be a pretty large card. I'd hate to get it and have it not fit! -- Kyle Sexton

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio

I recently plugged in Phone to my TDM400P Card to test out something I mostly use sip phones to interface with *. All of sudden I'm getting lot of line static noise coming of the card is there any settings I should look at or anything I need to do on the command line at this point I'm open to any ideas I'm running 0.7.1 on Redhat 9.0 machine. Any insight would be greatly appreciated.

Hi, Everybody, I can modprobe TDM400P card without feeding power supply , so what is the purpose of providing power supply in that card. Can any body tell me Regards Lokesh Portugal mail -lokeshkumar80@yahoo.co.in ____________________________________________________ Send a rakhi to your brother, buy gifts and win attractive prizes. Log on to http://in.promos.yahoo.com/rakhi/index.html