Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 busydetect=yes busycount=3 ;busypattern=500,500 ; DEFINING CHANNEL context = incoming_context_for_ptcl signalling=fxs_ks channel=> 1 -- Best Regards Shakeel Abbas -- Best Regards Shakeel Abbas -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090907/20147c6d/attachment.htm
http://www.voip-info.org/wiki/view/Digium+TE420P <http://www.voip-info.org/wiki/view/Digium+TE420P>The best resource is also quite On Mon, Sep 7, 2009 at 3:14 PM, ABBAS SHAKEEL <shakeel.abbas.qau at gmail.com>wrote:> > Hello > I am trying to configure TE420P but i am confused what to give chan_dahdi > :( > > Below is configuration i am using for TDM400P > > Please help what changes to make in it... Please provide a link as well > > [trunkgroups] > > > > > [channels] > ;default for channels > switchtype=national > rxwink=300 > > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > group=1 > > callgroup=1 > pickupgroup=1 > busydetect=yes > busycount=3 > ;busypattern=500,500 > > ; DEFINING CHANNEL > context = incoming_context_for_ptcl > signalling=fxs_ks > channel=> 1 > > -- > Best Regards > Shakeel Abbas > -- > Best Regards > Shakeel Abbas > >-- Best Regards Shakeel Abbas -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090907/34ad5b7a/attachment.htm
How we will the channels will be handled. I want to test it for loop back . On Mon, Sep 7, 2009 at 6:57 PM, ABBAS SHAKEEL <shakeel.abbas.qau at gmail.com>wrote:> http://www.voip-info.org/wiki/view/Digium+TE420P > <http://www.voip-info.org/wiki/view/Digium+TE420P>The best resource is > also quite > > > On Mon, Sep 7, 2009 at 3:14 PM, ABBAS SHAKEEL <shakeel.abbas.qau at gmail.com > > wrote: > >> >> Hello >> I am trying to configure TE420P but i am confused what to give chan_dahdi >> :( >> >> Below is configuration i am using for TDM400P >> >> Please help what changes to make in it... Please provide a link as well >> >> [trunkgroups] >> >> >> >> >> [channels] >> ;default for channels >> switchtype=national >> rxwink=300 >> >> hidecallerid=no >> callwaiting=yes >> usecallingpres=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> canpark=yes >> cancallforward=yes >> callreturn=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> group=1 >> >> callgroup=1 >> pickupgroup=1 >> busydetect=yes >> busycount=3 >> ;busypattern=500,500 >> >> ; DEFINING CHANNEL >> context = incoming_context_for_ptcl >> signalling=fxs_ks >> channel=> 1 >> >> -- >> Best Regards >> Shakeel Abbas >> -- >> Best Regards >> Shakeel Abbas >> >> > > > -- > Best Regards > Shakeel Abbas > >-- Best Regards Shakeel Abbas -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090908/2ef962b2/attachment.htm
/etc/dahdi/system.conf file is auto generated do we need to change in this file as we do for zaptel ? Any working examples -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090908/66894a9e/attachment.htm
No Problem you are Welcome. But please try to be on the list
Loop back connector can be used to test your card .
For loop back connector you have to make a loopback cable. that you will
plug in card. its image is
here<http://s580.photobucket.com/albums/ss246/shakeelabbas/?action=view¤t=IMAGE_054.jpg&newest=1>
.
How to make loopback connector? You can follow below table
RJ-48 Pin (on T1/E1 PIC)
(Data numbering form)
RJ-48 Pin
(Data numbering form)
Signal
1
4
RX/Ring/- <-->TX/Ring/-
2
5
RX/Tip/+ <-->TX/Tip/+
4
1
TX/Ring/- <-->RX/Ring/-
5
2
TX/Tip/+ <-->RX/Tip/+
3
3
Shield/Return/Ground
6
6
Shield/Return/Ground
7
No connect
No connect
8
No connect
No connect
9
No connect
No connect
10
No connect
No connect
11
No connect
No connect
12
No connect
No connect
13
No connect
No connect
14
No connect
No connect
15
No connect
No connect
Once You are done with Loop back connector.
Use the following configuration.
n chan_dahdi.conf
[channels]
callerid=asreceived
resetinterval=never
pridialplan=unknown
signalling=pri_cpe
switchtype=euroisdn
immediate=yes
group=0
context=test_in
channel=1-15,17-31
group=1
signalling=pri_net
context=test_out
channel=32-46,48-62
And in extensions.conf
[test_in]
exten => s,1,Answer();
exten => s,n,Playback(tt-monkeys)
exten => s,n,hangup();
[test_out]
exten => _X.,1,dial(DAHDI/g1/${EXTEN},60,R)
Once You are done with configuration you can test by making a call using
asterisk cmd dial application in console.
Please let me know if you face any problem
On Mon, Dec 7, 2009 at 5:59 PM, Daniel Airini <daniel at
syscomdigital.ro>wrote:
> Forgive me for disturbing you again.
> I had a talk with guys from my provider, and they ask me to setup my card
> for loopback.
> They need to make tests.
> Do you know how to do it?
>
> Daniel
>
> You are welcome
>
> On Mon, Dec 7, 2009 at 5:22 PM, Daniel Airini <daniel at
syscomdigital.ro>wrote:
>
>> It seems the jumper was the problem.
>> Changing to E1 solved it.
>> Now spans are detected, but seems there is no signal from my provider.
>> I got RED alarm.
>> Will contact provider, to see what's next.
>>
>> I think i can get it through from here.
>> Thanks for your help.
>>
>> Daniel
>>
>>
>> PART1:-
>> First Please look that the jumper is set for E1 or T1. Make sure that
the
>> jumper on the card is set for E1.
>> Once you are sure that jumper is for E1 and dahdi and asterisk is
>> installed then
>> use dahdi_genconf to generate the configuration files.
>> Now
>>
>> In chan_dahdi.conf
>>
>> [channels]
>> callerid=asreceived
>> resetinterval=never
>> pridialplan=unknown
>> signalling=pri_cpe
>> switchtype=euroisdn
>> immediate=yes
>> group=0
>> context=test_in
>> channel=1-15,17-31
>>
>>
>> And in extensions.conf
>>
>> [test_in]
>> exten => s,1,Answer();
>> exten => s,n,Playback(tt-monkeys)
>> exten => s,n,hangup();
>>
>>
>>
>>
>>
>>
>>
>> Let me know if you need more help
>>
>>
>>
>> On Mon, Dec 7, 2009 at 4:21 PM, Daniel Airini <daniel at
syscomdigital.ro>wrote:
>>
>>> Thank you for your help
>>>
>>> This is my situation:
>>>
>>> I have TE420P card and E1 line.
>>> Running dahdi_hadware i got this output:
>>>
>>> pci:0000:02:08.0 wct4xxp- d161:0420 Wildcard TE420 (4th
Gen)
>>>
>>> It seems that hardware is detected.
>>> Now what shoud i configure?
>>>
>>> dahdi_cfg -v gave me this:
>>>
>>> DAHDI Tools Version - 2.2.0
>>> DAHDI Version:
>>> Echo Canceller(s):
>>> Configuration
>>> =====================>>> Channel map:
>>> 0 channels to configure.
>>>
>>> Where do i have to put settings for my E1 line?
>>> I have E1 with euroisdn, [ bchan=1-15,17-31], [dchan=16]
>>> I'm really confused with all those configuration files.
>>> I have to set span or are is autodetecetd?
>>>
>>> lsmod is this:
>>> ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer)
1" (MASTER)
>>>
>>> dahdi_scan is this:
>>>
>>> [1]
>>> active=yes
>>> alarms=UNCONFIGURED
>>> description=DAHDI_DUMMY/1 (source: HRtimer) 1
>>> name=DAHDI_DUMMY/1
>>> manufacturer>>> devicetype=DAHDI Dummy Timing
>>> location>>> basechan=1
>>> totchans=0
>>> irq=0
>>>
>>>
>>> I you need other informations to help me, tell me what you need.
>>> I'm new to this and the harwdare part is harder for me.
>>>
>>> Thanks
>>> Have a nice day,
>>> Daniel
>>>
>>> Sure Daniel Please let me know what problem you are facing i will
help
>>> you at my best
>>>
>>> On Mon, Dec 7, 2009 at 3:35 PM, <daniel at syscomdigital.ro>
wrote:
>>>
>>>> Have you got it working?
>>>> I have the same situation.
>>>> TE420P configuration for E1 line.
>>>>
>>>> Can you help me?
>>>>
>>>> --
>>>> This message was sent on behalf of daniel at syscomdigital.ro
at
>>>> openSubscriber.com
>>>>
>>>> http://www.opensubscriber.com/message/asterisk-users at
lists.digium.com/12796120.html
>>>>
>>>
>>>
>>>
>>> --
>>> Best Regards
>>> Shakeel Abbas
>>>
>>>
>>>
>>
>>
>> --
>> Best Regards
>> Shakeel Abbas
>>
>>
>>
>
>
> --
> Best Regards
> Shakeel Abbas
>
>
>
--
Best Regards
Shakeel Abbas
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091207/debcfc1e/attachment-0001.htm
Dear Daniel, I am keeping this on list so that it can be help ful to others as well.>>>They ask me to return back to them the data packets they send methrough. In my opinion They are sending you data packets on some channel and you need to reply back from another channel ie send those data packets back from another channel(just like recieving a call from DAHDI/1 and send back by DAHDI/2 using pri_cpe and pri_net respectively). I have not experienced with it so if you know some thing better please add to my knowledge. On Mon, Dec 7, 2009 at 6:32 PM, Daniel Airini <daniel at syscomdigital.ro>wrote:> You misunderstand me. > This loopback test is done by my service provider. > They ask me to return back to them the data packets they send me through. > Have any ideea? > > Daniel > > No Problem you are Welcome. > > Loop back connector can be used to test your card . > For loop back connector you have to make a loopback cable. that you will > plug in card. its image is here<http://s580.photobucket.com/albums/ss246/shakeelabbas/?action=view¤t=IMAGE_054.jpg&newest=1> > . > > How to make loopback connector? You can follow below table > > > RJ-48 Pin (on T1/E1 PIC) > (Data numbering form) > RJ-48 Pin > (Data numbering form) > Signal > 1 > 4 > RX/Ring/- <-->TX/Ring/- > 2 > 5 > RX/Tip/+ <-->TX/Tip/+ > 4 > 1 > TX/Ring/- <-->RX/Ring/- > 5 > 2 > TX/Tip/+ <-->RX/Tip/+ > 3 > 3 > Shield/Return/Ground > 6 > 6 > Shield/Return/Ground > 7 > No connect > No connect > 8 > No connect > No connect > 9 > No connect > No connect > 10 > No connect > No connect > 11 > No connect > No connect > 12 > No connect > No connect > 13 > No connect > No connect > 14 > No connect > No connect > 15 > No connect > No connect > > > Once You are done with Loop back connector. > Use the following configuration. > n chan_dahdi.conf > > [channels] > callerid=asreceived > resetinterval=never > pridialplan=unknown > signalling=pri_cpe > switchtype=euroisdn > immediate=yes > group=0 > context=test_in > channel=1-15,17-31 > > group=1 > signalling=pri_net > context=test_out > channel=32-46,48-62 > > And in extensions.conf > > [test_in] > exten => s,1,Answer(); > exten => s,n,Playback(tt-monkeys) > exten => s,n,hangup(); > > [test_out] > exten => _X.,1,dial(DAHDI/g1/${EXTEN},60,R) > > Once You are done with configuration you can test by making a call using > asterisk cmd dial application in console. > > > Please let me know if you face any problem > > > On Mon, Dec 7, 2009 at 5:59 PM, Daniel Airini <daniel at syscomdigital.ro>wrote: > >> Forgive me for disturbing you again. >> I had a talk with guys from my provider, and they ask me to setup my card >> for loopback. >> They need to make tests. >> Do you know how to do it? >> >> Daniel >> >> You are welcome >> >> On Mon, Dec 7, 2009 at 5:22 PM, Daniel Airini <daniel at syscomdigital.ro>wrote: >> >>> It seems the jumper was the problem. >>> Changing to E1 solved it. >>> Now spans are detected, but seems there is no signal from my provider. >>> I got RED alarm. >>> Will contact provider, to see what's next. >>> >>> I think i can get it through from here. >>> Thanks for your help. >>> >>> Daniel >>> >>> >>> PART1:- >>> First Please look that the jumper is set for E1 or T1. Make sure that the >>> jumper on the card is set for E1. >>> Once you are sure that jumper is for E1 and dahdi and asterisk is >>> installed then >>> use dahdi_genconf to generate the configuration files. >>> Now >>> >>> In chan_dahdi.conf >>> >>> [channels] >>> callerid=asreceived >>> resetinterval=never >>> pridialplan=unknown >>> signalling=pri_cpe >>> switchtype=euroisdn >>> immediate=yes >>> group=0 >>> context=test_in >>> channel=1-15,17-31 >>> >>> >>> And in extensions.conf >>> >>> [test_in] >>> exten => s,1,Answer(); >>> exten => s,n,Playback(tt-monkeys) >>> exten => s,n,hangup(); >>> >>> >>> >>> >>> >>> >>> >>> Let me know if you need more help >>> >>> >>> >>> On Mon, Dec 7, 2009 at 4:21 PM, Daniel Airini <daniel at syscomdigital.ro >>> > wrote: >>> >>>> Thank you for your help >>>> >>>> This is my situation: >>>> >>>> I have TE420P card and E1 line. >>>> Running dahdi_hadware i got this output: >>>> >>>> pci:0000:02:08.0 wct4xxp- d161:0420 Wildcard TE420 (4th Gen) >>>> >>>> It seems that hardware is detected. >>>> Now what shoud i configure? >>>> >>>> dahdi_cfg -v gave me this: >>>> >>>> DAHDI Tools Version - 2.2.0 >>>> DAHDI Version: >>>> Echo Canceller(s): >>>> Configuration >>>> =====================>>>> Channel map: >>>> 0 channels to configure. >>>> >>>> Where do i have to put settings for my E1 line? >>>> I have E1 with euroisdn, [ bchan=1-15,17-31], [dchan=16] >>>> I'm really confused with all those configuration files. >>>> I have to set span or are is autodetecetd? >>>> >>>> lsmod is this: >>>> ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer) 1" (MASTER) >>>> >>>> dahdi_scan is this: >>>> >>>> [1] >>>> active=yes >>>> alarms=UNCONFIGURED >>>> description=DAHDI_DUMMY/1 (source: HRtimer) 1 >>>> name=DAHDI_DUMMY/1 >>>> manufacturer>>>> devicetype=DAHDI Dummy Timing >>>> location>>>> basechan=1 >>>> totchans=0 >>>> irq=0 >>>> >>>> >>>> I you need other informations to help me, tell me what you need. >>>> I'm new to this and the harwdare part is harder for me. >>>> >>>> Thanks >>>> Have a nice day, >>>> Daniel >>>> >>>> Sure Daniel Please let me know what problem you are facing i will help >>>> you at my best >>>> >>>> On Mon, Dec 7, 2009 at 3:35 PM, <daniel at syscomdigital.ro> wrote: >>>> >>>>> Have you got it working? >>>>> I have the same situation. >>>>> TE420P configuration for E1 line. >>>>> >>>>> Can you help me? >>>>> >>>>> -- >>>>> This message was sent on behalf of daniel at syscomdigital.ro at >>>>> openSubscriber.com >>>>> >>>>> http://www.opensubscriber.com/message/asterisk-users at lists.digium.com/12796120.html >>>>> >>>> >>>> >>>> >>>> -- >>>> Best Regards >>>> Shakeel Abbas >>>> >>>> >>>> >>> >>> >>> -- >>> Best Regards >>> Shakeel Abbas >>> >>> >>> >> >> >> -- >> Best Regards >> Shakeel Abbas >> >> >> > > > -- > Best Regards > Shakeel Abbas > > >-- Best Regards Shakeel Abbas -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091208/a0d9d585/attachment.htm