similar to: constant ringing on Zap channels

I am hoping to replace my Nortel 8x24 switch with Asterisk. Right now my cabling comes from my outside phone box into my office and into a punchdown block and leaves the punchdown block as an amphenol connector which currently plugs into the Nortel swicth. A second amphenol connector them plugs into the switch and extends to another punchdown block that I believe carries the lines throughout the

I would like to have asterisk pass along the caller ID phone number to a database server on a my local network (the same network that the * server resides on ) so that our customer service app. can pull up customer data automatially. Asterisk passes along caller ID to the phones fine, can someone tell me how to make it pass this info to my database server? Any suggestions would be greatly

I am having trouble getting my T100P and ADIT 600 talking. I have 2 FXO 8 port cards in the ADIT and a T1 controller card. I have a T1 x-over cable connecting two together. Here are copies of the relevant bits of my zaptel.conf and Zapata.conf Zaptel.conf span=1,0,0,esf,b8zs loadzone=us defaultzone=us Zapata.cfg context=default signalling=fxs_ks group=1 channel => 1-24 My

After months of setting up Asterisk. I completed the final testing last night We would go live on Monday. Or so I thought. As I moved the Adit 600 back out of the way, sliding it six inches. I noticed the major light was red as were both T1 and T2 lights ( eventhough only one t1 port is being used ) -- I have no idea what these lights mean or if they were lit before when things were working.

I know a few ppl have those CAC Adit 600's with t400 I can't seem to get my second span up on the T400 connected to the second spand on the adit (A:2) A:1 seems ok Can someone post they zaptel.conf span defintions And maybe a "print config" from the adit 600 cli I think my issue is timing srcs the coding, framing. bld out are all matched thx -------------- next part

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the command line. The slots (3 fxs) are configured with 'ls' signaling. I configured the T1 card with the same line settings as the T1 interfaces on the adit and I get green lights on both the T1 card and the T1 interface on the adit (so

Hello, I've recently purchased Adit 600 with 3FXS and 1FXO to be connected to my * server via T100P card. This is the output of "status equipment" command in the Adit600: For some reason the FXO card is seen as FXS, why? Is it ok? On the card it is written "FXO". Regards, Shlomi Bachar -------------- next part -------------- An HTML attachment was

Hello All, Just a question, I have an adit600 and I am looking for a way to pull the incoming cid into asterisk. Does anyone know if this is just not possible via t1? Or is it only available on PRI? Thanks, Greg

Can someone recommend a good quality 24 or greater port channel bank? Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070506/e5896021/attachment.htm

Here's our config: cisco 7960's running 6.3 sip code latest cvs of * t100p zaptel card adit 600 channel bank 7 pots lines and 2 fax machines on the adit 600 dialing out from the cisco phones gets sent out via the zap channels, but I'm having some serious echo problems. I currently have the adit set to +3 rxgain and -6 txgain, with my zapata.conf containing: echocancel=128

Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door. So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk

Jon, I actually had some more discussions with Tim on this issue, and it seems that the channel bank would still be a good option to choose for internal purposes. I would not see any other solution than a channel bank to connect many 2wire phones into one asterisk box. I had a talk today with Carrier Access, and it seems that the adit would do us fine. The fxs cards of the adit 600 are

I use Centos 4.2 with all service pack installed. I verified traffic on link WEB and I see port TCP 80 with many traffic. I accessed lod /var/log/httpd/access_log and show below. ca.com/members/index.php HTTP/1.0" 401 - "http://members.sapphicerotica.com/members/index.php" "Mozilla/5.0 ( compatible; MSIE 5.01; Windows XP; NetCaptor )" 68.119.110.138 - -

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

Hello, I am working for a charity in the UK and I am projecting a new phone system. We would like to connect our two-wire telephones (40 or so) to an ADIT 600 channel bank, and connect that into an Asterisk box via the CMG card or T1 card. I have been in talks with Carrier Access about the purchase of a new channel bank and we tried to get a minor version of it first for testing with the

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

Just starting to do the research on this one....I've got a customer who is showing interest in replacing any older Panasonic unit providing service to 96 tip/ring lines from a single PRI. Does anyone have any recent experience with a decent (as in, plays nice with * and has a reasonable per-port cost) channel bank or similar? Mediatrix only goes up to 24 port, as far as I can tell, which

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

I have an adit 600 with an fxo card connected to a digium T1 card. If I try to make an outgoing call and the T1 cable is disconnected, asterisks returns congested like it should. But, if the adit 600 is connected to the T1 card, the adit 600 immediately "answers" the call even if there are no physical lines attached. I even removed the fxo card and the adit 600 still