Displaying 20 results from an estimated 2000 matches similar to: "X100P FXO card-No Dial Tone"
2009 Jun 09
0
FXO- no dial tone- no call progressing
Dear all,
I connected a normal phone line to the FXO port but the call is not being
processed. The following is the output to asterisk console when I dial 9150
"9 is the prefix I configured and 150 is a local service in to know the
current time"
*CLI> -- Executing Dial("SIP/4444-d365", "Zap/1/150") in new
stack
-- Called
1/150
-- Zap/1-1 answered
2008 Oct 20
1
Zaptel FXO offhook when connected to PSTN
I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having
an annoying issue with the FXO ports. As soon as I plug either one into the
phone line it's as though the line is disconnected i.e. get disconnected
tone when trying to dial out, line is busy when dialling in.
The CLI shows the following:
trixbox1*CLI> zap show channel 4
Channel: 4
File Descriptor: 18
Span: 11*
2009 Dec 24
0
X100P clone card problem
Hi,
I have problem with X100P clone card.I can not force it to work
under Asterisk 1.4.27.1 and DAHDI Version: 2.2.0.2.
I looked over and over on configuration and could not see any mistakes.
Here are relevant configuration files.
/etc/dahdi/system.conf
> fxsks=1
> echocanceller=mg2,1
> loadzone = hu
> defaultzone = hu
>
dahdi_tool
> OK Wildcard X100P
2020 Mar 27
0
AX-1600P FXO port configuration
Hello everyone,
I have a Atcom AX-1600P(1) card with a FXO module and I can't configure
it. I have four extension with this PJSIP settings:
--- /etc/asterisk/pjsip.conf ---
[transport-udp]
type=transport
protocol=udp
bind=0.0.0.0
[6001]
type=endpoint
transport=transport-udp
context=from-internal
disallow=all
allow=ulaw
auth=6001
aors=6001
direct_media=no
rtp_symmetric=yes
force_rport=yes
2005 Jun 28
0
BRIstuff/OctoBRI problem: Ring requested on unconfigured channel 255/255 span 5
Hi all,
I just posted this question before last week.
Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to
1.0.8-BRIstuffed-0.2.0-RCh
the same problem occurs, but seems to be more seldom.
Attached is now the output of "zap show channel" .
-
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.
2009 Jun 08
1
Achoring MEdia
I have 2 hosts that Asterisk is in between of...and for both I have canreinvite=no - but asterisk still sends re-invite to get out of the media path.
?
Proxy 1 --> Asterisk--> Proxy 2
?
I want asterisk to anshor media..
?
In extenstions.conf I have an entry to send calls for say 5551000 to proxy 2 and if? I suffix that entry with ||t , asterisk does anchor media....
?
However, it is
2009 Aug 17
0
Echo on TE121B with hardware echo module
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
problem.<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
TE121B PCI express card with a HARDWARE echo
2005 Aug 12
3
TDM400P FXO channel hookstate always "Offhook" & outbound digits sent before provider dialtone
I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a
TDM400P with (1) FXO card on port 4. Inbound calls are always successful
but outbound calls fail 75% of the time with intercept messages from my
dial tone provider that include "we're sorry, your call did not go
through", and "we're sorry, when placing a local call it is now
necessary to dial an area
2009 Feb 28
2
clone X100p+dahdi dial out works only after receiving call
So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though.
I believe it comes down to this: I can call out only *after* I've received a call.
So, cold boot. Then:
modprobe dahdi
modprobe wctc4xxp
modprobe wcfxo
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.1.0.3
2008 Oct 23
2
Hylafax asterisk iaxmodem problem
Hello all,
I have an asterisk box running in a customer with Hylafax, iaxmodem,
asterisk 1.2.18.
The service can receive faxes, from a lot of fax machines, but there
are a couple of them that asterisk Hylafax cannot complete.
This calls arrive the asterisk box, asterisk detect that this calls
are fax, asterisk answer the call, and then Hangup the call. But
hylafax do not receive nothing.
When
2005 Feb 07
0
can not dial problem
I have a TDM400P with fxo and fxs modules, and local extension calls work fine but
I can not dial-out. I am getting both problems on FreeBSD and Linux, and plugging
a regular telefon set works fine. Any ideas of what I am missing?
thanks
micko
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default)
2007 Sep 27
1
Zap channel stuck in conference
Hello, I have a strange problem with one of my Zap channels. A user told me
that he was in a voicemail system during a call, hit the Flash button, and
the call hung up. Now we get no dialtone on the phone hooked up to the
channel. Here's the status of the channel:
jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7"
Parsing /etc/asterisk/extconfig.conf
Channel: 7
File
2014 Jan 31
0
e911 Signalling
Hi,
We've got a dedicated T1 with two trunks running into our ILECs
selective router for 911. Split out of the T1 into two MF CAMA trunks
on ILEC side.
I'm trying to use asterisks e911 signaling, but I'm having trouble with
the dial command. (== Everyone is busy/congested at this time (1:1/0/0))
I'm missing something and I'm thinking it has to do with the hookstate
2010 May 07
1
DAHDI astribank Channel Unavailable
Hi guys,
This has been bugging me for days and I can't figure out what's happening.
Using the same channel on DAHDI, I can't make a call after previous one being hung up by remote side. However, it works like it should if my end hangs up the call. To make things interesting, DAHDI, or astribank rather, seems to "reset" itself after receiving an incoming call on that DAHDI
2005 Jan 24
2
Wildcard TE405P and TDM400 - TDM not working
Im having a problem getting the 2 cards working together.
I added the TDM with 3 FXO and 1 FXS board.
The TE405p is working fine. THe TDM registers and identifies the FXO's
and FXS but cant get them to go off hook.
I hope someone can help.
Asterisk seems to THINK its dialing it sends manager status as dialing,
and it just sits there with no tones, on the phone dialing out.
If I dial,
2003 Nov 05
1
X100P modify DTMF tone length
Is there a way to get my X100P card to dial "slower" on the line? Mine
seems to dial the digits too short/fast for the switch to catch all of the
digits and roughly 25% of outbound calls fail to complete. I've monitored
on the line with a test set and the audio sounds clean, and I hear the X100P
send out digits really fast, but sometimes the switch seems to time out and
issue
2003 Sep 10
1
Prompts and sound quality of the X100P card (FXO card)
Hi
We are trying to get better sound quality out of the prompts on our Asterisk
system. We had some new ones made by thevoice.digium.com and they are in WAV
format instead of the default GSM format on the Asterisk server. The problem
is, when you dial in to the server using the FXO card (X100P) you really
can't tell the difference between the WAV prompt and the GSM prompt,
however, if you
2003 Dec 02
0
Echo: X100P vs. Cisco FXO cards
I get echo on my X100P for about 15 seconds then it disappears. Believe me,
when I get a chance I'm going to tweak it since my wife nags me about it. I
converted my house over to *.
My setup:
Compaq Deskpro EN SFF P3 500
Dual NIC for real IP and internal IP
X100P Card for PSTN.
Cisco ATA186 (two cordless phones for the old lady)
Cisco 7960 Phone
Cisco 2621 w/ 2 FXO's and 2 FXS (Fax is
2004 Apr 10
2
X100P FXO PCI Card
Does anyone know if you can put two of the X100P cards in to the same machine and have access to two landlines ?
I just need to know if it's worth buying two or not !
Thanks, Paul.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040410/2608a3fd/attachment.htm
2005 Jul 04
5
X100P FXO PCI Card + Incoming Fax
Is the X100P FXO PCI Card capable of detecting a fax, answering the
call, and then emailing the fax content to an email address?
Thanks.
Paul.