asterisk users - Nov 2003 - X100P modify DTMF tone length

Is there a way to get my X100P card to dial "slower" on the line?    
Mine
seems to dial the digits too short/fast for the switch to catch all of the
digits and roughly 25% of outbound calls fail to complete.    I've monitored
on the line with a test set and the audio sounds clean, and I hear the X100P
send out digits really fast, but sometimes the switch seems to time out and
issue a standard recording.

Thanks.

You can change it in digits.h in zaptel, recompile, reload all drivers or
reboot.

Mark

On Wed, 5 Nov 2003, Mark Hagler wrote:
> Is there a way to get my X100P card to dial "slower" on the line?
Mine
> seems to dial the digits too short/fast for the switch to catch all of the
> digits and roughly 25% of outbound calls fail to complete.    I've
monitored
> on the line with a test set and the audio sounds clean, and I hear the
X100P
> send out digits really fast, but sometimes the switch seems to time out and
> issue a standard recording.
>
> Thanks.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>