similar to: bottlenecks

Good Afternoon, I have an Asterisk box that is acting like it is passing "core show" before every command I type. For example, if I type sip, I will get "No such command 'sip' (type 'core show help sip' for other possible commands). Any ideas? -- -jayson

Hi all, I am handed a project to setup *. The requirement is that it can handle 8 T1s. Half of the calls coming into the system will be routed to SIP extensions (with transcoding). The machine we have in our disposal is a new dual Xeon 3.2gHz server with 2g of ram and an dual 1000mb nic. Voice will be coming in from the PSTN (through 2 quad digium cards) in g711ulaw, and most of the time will

Hi gang, We are moving our 1.4 asterisk with DAHDI over to 10.0 with SIP. Everything is going nicely except that I can't get NV_FAXDETECT to compile properly into 10.0. Because of this, I will have to have my receptionist manually transfer incoming faxes. Any suggestions? Thanks in Advance Danny Nicholas -------------- next part -------------- An HTML attachment

Hello, I have Asterisk 1.6.2.9-2, the directive "sendrpid" does not work! I placed this in my peer: (sip.conf) sendrpid=yes trustrpid=yes or sendrpid=yes trustrpid=no (and restarted Asterisk) and the line "Remote-Party-ID" does not appear in my sip debug! Please help me, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello - I am looking at connecting 7 - 10 locations together using Asterisk and possibly some VoIP gateway appliances. I need to insure best voice quality as these trunks will be used primarily for customer calls. I am considering implementing a full T1 frame relay circuit to each location which can be done for a reasonable cost. DSL and Cable are currently at each location and setup for

Hello What is the difference between these 2 version of Asterisk in terms of functionality. For a small office am I going to run into problems if I use the easy version... Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050717/311c56ec/attachment.htm

Sending works but on receive it keeps failing - reporting back 'training' failure. I am using Asterisk 1.6 with T38. What should I post to the list to assist diagnoses? Michael

Anybody here having trouble receiving email from the list on Gmail? I havn't received anything since Friday July 29.

Hi, Sorry for maybe not a very list related topic, but I have always been curious if there is information on how many Asterisk based PBXs are operating Worldwide? Thanks and hope the community will not reject my curiosity! :) Best Regards, Vallu Sevana Oy -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have compiled zaptel on Mandrake following everything I have always done on Fedora. It is 2.6 udev so... I had to modify the 01-devfs.rules Make linux26 Make Make install... Everything appears to compile correctly but it says module not found when doing "modprobe zaptel" Is this a rights issue? Jordan Novak -------------- next part -------------- An HTML attachment was

Hello Everyone, We are getting some rather poor results (relative) with our Asterisk setup. Not sure if we are using the sipp correctly etc.. but nevertheless, is there any documentation that describes how we can get the most our of our Asterisk box. For example when we hit the "too many file" error, and fixing it using ulimit..... Also, is there any way we can allocate sufficient

I'm trying to setup asterisk to accept call from Teliax, request the 10 digit number from user, then dial it thru the VoIPJet. If I'm not wrong I will be charged by both providers because both connection is active during conversation. So my question is can I set the things so that I pay only to VoIPJet? Specific configuration snippets will be greatly appeciated. Thank you.

Hi, Has anyone met any success, installing localized (ie non-english) menus within SIP firmware enabled Cisco 7941 ? Those phones seem to be trying to download localized menus from Cisco Call Manager but as they are managed by an Asterisk server, I'm looking for a workaround. Any advice ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have written some monitoring and stat collection scripts that use asterisk -rx "command" The script runs once a min and logs data and posts any critical notifications. Everything is working well with this method but we get the -- Remote UNIX connection / disconnect message once a min and we would like to suppress it. Is it possible without reducing the verbose logging level.

Please help me test my setup by dialing 800.564.0215 and listen to the queue for a bit. I have a quad port T1 with NFAS setup. I can dial-out but I cannot dial any 800 numbers (Global Crossing says I need LDS service and that will be a couple weeks) so I cant test it myself. I need at least 24 callers to feel comfortable enough that it is working properly. Thanks, Steve Totaro

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

Hi listers, I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer. Thanks, James

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

Is the new NIN Ghosts music (free download) safe for MOH? Justin ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm