similar to: Grandstream and Transfers

I just started poking around with writing a python module to interface to the Manager API, and it suddenly hit me... how the heck are you supposed to program this thing? All the events seem to be dumped to all the open connections. If I send a command, such as a login, there seems to me to be no way to determine which response are intended for me, and which may be intended for another open

-----Original Message----- From: Chad Brown Sent: Tuesday, December 21, 2004 8:02 PM To: 'el_flynn@lanvik-icu.com' Subject: RE: [Asterisk-Users] Dialplan help - Can dial any user but not thePSTN Flynn, Yes, that makes sense. However, in my case I have incoming calls arriving on an IAX channel from a PSTN gateway. I think the concept is the same. That said, if incoming calls have access

I am currently developing a asterisk ncurses interface using the manager API. The project is currently awaiting sourceforge's approval but I have a beta online at http://sig.lange.googlepages.com/assman . The projects real home will be assman.sf.net. This project really consists of two parts, libassman is a C manager API and assman is the ncurses portion. It's still beta but I have been

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Hi all, I'm just wondering about these VoIP services -- do you have to sign up one account -per- client that will be using the service? I've got multiple extensions behind my Asterisk box, and I want to be able to allow all my staff to place calls via the provider. So if I sign up for one account, will multiple users behind my Asterisk box be able to make calls, using that same

hi all, i've got a proposed setup that i was wondering if you guys could comment on. the client wants * and a couple of SIP phones to be on a separate network than the rest of the office, so that in case their primary network crashes for some reason the PBX won't be affected. one other factor: the client may at some later point set up SIP UAs sitting on the primary network that will

Hi there, I've got an installation where there's 12 POTS line incoming into *, and am trying to get some insight as to which VoIP hard phone would be most suitable for this scenario. Most of the VoIP phones I've looked at only have 4-6 line presentations; is anyone aware of one that has more? I tried to get some info about Snom's Keypad 220 since it has loads of programmable

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

Hi, I'm running two boxes side by side, identical specs and setup but with differing dialplans. Both are on ast/zap/libpri versions 1.0.9. Both boxes share the same folder for voicemail, exported via NFS from another file server. Everything was working fine for an extended period of time, until just recently when someone rebooted Box A. Now when I dial an extension associated with a SIP

Hi All We have Grandstream 102's running ver X.18. When hanging up after a call has been made the grandstream seems not to disconnect the call and when you put the handset down the phone rings only to pick it up and be on the same call. This is happening quite often and gets very irritating. Can anyone help with this? Regards Doug

Hi all, I was wondering if anyone had any pointers on how to determine whether or not a module has gone wonky on the TDM400P? I have a 2 FXO (channels 3 and 4) and 2 FXS unit (channels 1 and 2). The bad (?) module in question is the FXO module on channel 3. I can't dial in to or out of that channel; dialing in gives a busy signal, dialing out just shows * hanging around after attempting a

Consider this dialplan fragment, where the call is being dialed into [macro-process-routing] over an iax2 channel from another (same build) Asterisk server: [macro-process-routing] ; This is the entrypoint of the debug call but is also refered to by Macro(process-routing) elsewhere in the dialplan ; XXX-NNN-6800 exten => _6800,1,Macro(6800-interceptor) ; This is matched when 8 is

I've searched for a few days now without finding an answer. The release notes for version 1.0.5.16 of the Grandstream firmware says it supports attended transfer using replace but the docs haven't been updated so I can't work out how to enable it, or whether it should Just Work. I'm currently using the # attended transfer patch for * but would like to get back to using the

Everytime that I make a call to a Budgetone 101 phone. I always see the following: -- Executing Dial("SIP/1001-bac5", "SIP/1000|20|tT") in new stack -- Called 1000 -- Got SIP response 302 "Moved Temporarily" back from 172.22.5.4 -- SIP/1000-465e is busy I can use X-Lite all the time to make a call without a problem, but any of the budgetone 101 phones

I am trying to connect to a vocal server from an asterisk server. A call is received via iax2 to my asterisk server. I then initiate a SIP connection to the vocal server. everything works great except dtmf doesnt work. A cisco 5300 can connect to this vocal server and do dtmf without a problem. I have my dtmf set to rfc2833 in the general section of the sip.conf . I can confirm that the

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

Version 1.0.5.23 is now available from http://gs-firmware.gratissip.dk/ Or directly from Grandstream at http://www.grandstream.com/BETATEST/Release-b21p1.0.5.23.zip Release notes doc here http://www.grandstream.com/BETATEST/Release_Note_1.0.5.23.doc while on the matter I just want to extend a note of thanks to Grandstream, I had 2 early handsets of theirs fail recently (about 9 months old)