similar to: Setting up Security Groups

I have an interesting dilemma with sequencing in the dialplan. Up to now, I have assumed that the extensions in the dial plan were tested in the order that they appear in extensions.conf. In other words, I have the following fragment which was designed to dial toll free on the PSTN and all other long distance on VoIP: [longdistance] include => local

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

ENUM lookups at e164.org return a IP route for ALL toll-free numbers. I was surprised to observe that ALL toll-free numbers get a hit at e164.org. It appears that ALL toll-free prefixes have been delegated, thereby publishing an IP route for YOUR TOLL-FREE NUMBERS, my toll-free numbers, and even toll-free numbers that have not been allocated. :-) See below Should I care? Even though this

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

Recently, I've been having issues with the URIs returned from e.164.org and toll free calls. It seems that the URIs that are returned from ENUMQUERY and ENUMRESULT are no longer the proper numbering schemes that the poviders use. I've been using the following [enum] template in my outbound route for quite some time with great success until recently. [enum](!) exten =>

Perhaps someone else has had this issue. I currently have BroadVoice as my SIP provider with two phone numbers. The first number is my primary local number; the second is an 877 toll-free number. The issue is with the IVR abilities. When calling the primary number you can press 200 at the main menu and receive my extension. When calling the 877 number, 200 will result in ?that option is invalid?

Hallo all do any of you know if the toll free access to the Netherlands is still working via FWD or Iaxtel? thanks liaan --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term' -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi. recently I have been trying to setup a PRI on asterisk. Inbound calls are working just fine but I am not able to make outbound calls. Does anyone know what I need to change to make outbound calls work? Right now the PRI is instantly hanging up on the outbound calls. I have included full debug info as well as config files. /etc/zaptel.conf span=1,1,1,esf,b8zs bchan=1-23 dchan=24

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

I'm trying to create several contexts for extentions with different levels of access to features and I'm wondering how the heck do I include all the contexts so that you can call internal to any extention in another context without giving the features of the higher level context to the lower level context? ie..... [admin] include => local include => longdistance include =>

Hello, I have asterisk 1.2.9 running on a Debian sarge server, my outbound dial plan looks something like this: [outbound-longdistance] exten => _91NXXNXXXXXX,1,Dial(${OUTBOUND1}/${EXTEN:1}) About every other outbound call we make, we get the 'you must first dial a 1' message from our phone provider. It only seems to happen every other try if we try to make multiple out bound

Hi all, My VoIP provider (race.com) doesn't send name info with CallerID, so I wrote an AGI script that does the following: 1) If it's a toll free number (800|888|877|866), set the CallerID name to "TollFree Caller" 2) Use curl to look up the number in Google phonebook 3) If a business listing, set the CallerID name to business name, as is. 4) If it's a residential

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

I am not that good at regex and it's use in Asterisk. I am running Asterisk 1.4.13 Currently I have this in my extensions.conf for incoming calls on our house phone line: [housemenu] exten => s,1,GotoIF($["${CALLERID(num)}" = "815xxxxxxx"]?s|12); 815xxxxxxx is our home phone number, when caller id fails or is missing that is what is recorded. I want to expand this

I have an "outbound-ld" context as follows: [ Context 'outbound-ld' created by 'pbx_config' ] '_1NXXNXXXXXX' => 1. Macro(enumdial|${EXTEN}) [pbx_config] 102. Wait(1) [pbx_config] 103. Set(LINE=${IF($[${LINE}=pots]?link2voip:${LINE})}) [pbx_config]

Now that Nufone is dead, what are other providers of 800 numbers that work with Asterisk? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

I've got a need to do something like the following: [foo-context] exten => _.,1,SetCIDNum(123) exten => _.,2,SetCIDName(XYZ) include => local include => tollfree But of course, this example won't work. The goal here is this: if a call ends up being handled by the "local" or "tollfree" contexts, I want those SetCID*** commands executed. Otherwise, I

Hi Is there anyway to add logic to dialplan pattern matching? I would like to match all toll free numbers with one pattern, so 1800, 1877, 1866, 1855, etc. I can't figure out how to do this in dialplan syntax. As a programmer, I want to say 18[00 or 77 or 66 or 55 etc]. Can't figure out if this is even possible with dialplan pattern matching (though I suspect it is somehow). Andrew

Hi, I recall seeing a sample extensions.conf file that allowed tollfree calls to be routed via iaxtel to the US and the NL, but I must be going blind, because I've scoured the list but can't find it. Can someone send it to me if they have it? Much appreciated. Thanks! --- Paul Cheng M?ty?s kir?ly ut 10 H-1121 Budapest HUNGARY paul.cheng@alum.mit.edu mobile: +36 30 381-9311