similar to: CallerID - Broadvoice vs. VoicePulse

I run an automated information retrieval system, using Asterisk. Fairly often the system misses a dialed digit. Our codes are all 4 digits, see lots of logs with: 4199 - OK 530 - Invalid code 330 - Invalid code 5330 - OK As callers experience skipped codes. We're using Broadvoice SIP with inband DTMF (and we've tried every possible setting or option

I recently switched from BroadVoice to VoicePulse Connect on my Asterisk box. Too many Meetme quality complaints (whether real or perceived). I had to make a choice to use IAX2 or SIP with VoicePulse. I first tried to go with SIP because I already had it working and all of our devices are SIP. Problem is that every time I turn my back, the Asterisk registration with the VoicePulse SIP server

Hello, Being totally fed up with the lack of quality and reliability from both VoicePulse and BroadVoice, We are switching to a direct IP connection to Global Crossing. We've installed a local point-to-point T1 into their CO, and they will give/take SIP g729a directly and act as the gateway for us. In setting up the inbound SIP service, they are asking the question, "In what format do

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Skipped content of type multipart/alternative

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,

Which would you recommend as far and quality and pricing to connect to asterisk (including DTMF issues)/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/bf7bf081/attachment.htm

I'm having a very annoying problem with access my asterisk system from work. Our phone system here only produces very very short DTMF tones. The phones work fine for other IVR systems (Dell Support, HP Support, etc, etc). However, tones to Asterisk just never make it. The way I'm calling into my Asterisk server is such: OFFICE PHONE => CALLUK.COM 0870 => IAX Inbound The

I've just stumbled across a rather weird problem and was wondering if someone could shed some light on the situation. In testing faxing through Asterisk using Voicepulse Connect for trunking I am able to receive faxes without a hitch. Quite impressive considering previous experience with certain other VOIP providers. Today I finally got around to testing outbound faxing and found that if

I have a couple of DID's through VP Connect and have been having sound quality issues on incoming calls. During the call, the calling parties voice sometimes sound like it is crackling, in other words it is not very crisp. I would liken it to listening to a radio with a blown speaker. This sound defect comes and goes throughout the call. The other person is always audible but it just isn't

If this has been covered before - I appologize. We use some Sipura SPA-2000's with the g711 codec and all seems fine (except for the occasional failure to register errors in my asterisk logs - but I will save that for another post). g711 call quality is on par with our Cisco 7960's. However, when using the g729 codec, the call quality on the Sipura device goes downhill on the PSTN side

I just set up a Polycom 500 on *. Every few calls I make, the call connects and the receiving party can hear me (thru Broadvoice), but I still get ringing on my end, as if they never picked up. * logs look just fine. Does any one have any suggestions? Thanks. ________________________________ Adam S. Robins Executive Vice President & CIO PHARMACENTRA, LLP 5901B Peachtree Dunwoody

Hi, I am thinking of signing up with voice pulse connect to connect to my asterisk server and using it as a regular line. Is it good? Or should I go with vonage or others ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050124/16792f10/attachment.htm

Is anyone else having problems with them? Until today everything was working fine. But now dtmf is not working on incoming calls. Any ideas? I tried calling them and their voicemail is not accepting answers. Is there another source for DIDs in the 314 or 636 area codes? Especially a company that supports something besides ulaw. I am going to hate switching numbers again, my wife is

Does anyone have any experience with iax.cc/sixtel? Are they a legitimate company? From their website it looks like you can get a private incoming 800 number for 30 cents/month plus 2 cents/minute. Somehow that pricing seems a little cheap for a DID number. I assume there has to be some minimum usage or something. Any info as far as actual costs and/or voice quality would be appreciated.

Two cvs-head asterisk boxes with iax2 working fine (without register statements). When two calls are placed simultanously from system A -> B and the packets are sniffed on the wire, I see the two calls using two different udp packets. At the top of iax.conf I have trunk=yes and jitterbuffer=yes (at both ends). I was expecting to see both calls handled within a single udp packet, but

I can't seem to dial out with Voicepulse Open Access service using *. Incoming works fine. Another user posted a few weeks back that they were having problems and there are some threads at dslreports.com about this as well. Maybe someone here can figure out what the issue is from the sip debug info below. I am at a loss. The audible error message from Allison is 0984 (from VP server) Here is

I have a couple of DID's with LiveVoip and am having major DTMF issues on incoming calls. I am connecting to them through IAX using ULAW. When someone dials one of these DD's (from a landline) they are for the most part unable to navigate the IVR menu successfuly. I would say the failure rate is greater than 80%. For example if the caller presses 5 sometimes * will see the DTMF as 55 or

Is there any way to change the outgoing caller id on BroadVoice I have tried SetCallerID(Name <Number>) but that does not work Thanx -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050126/bbd95fcf/attachment.htm

Is any one else having problems with Voicepulse today? Suddenly, I can't register and calls to my Voicepulse numbers get a fast busy. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815