similar to: SpanDSP: Training failed (sequence failed)

Hi, I just sent this to Steve Underwood, but then found a bunch of posts on the mailing list about similar issues.. does anyone have the fix? I'm running asterisk CVS-HEAD-06/28/04-18:13:13, spandsp 0.0.1k, libtif 3.5.7 one thing i just noticed is that calls come in with format '72' which is G711A-law or LinearPCM.. it uses PCM for the call, i assume this is ok the results of RxFAX

I am having a problem with SpanDSP. What happens is when I send a fax to SpanDSP the fax message seems to fail in the training phase. I think it's a timing error, however I have no idea about how to rectify the problem. I have included a copy of the log below. I am using a Digium TDM-400P card with 2 x FXO ports and 2 x FXS ports. The fax is connected to one of the FXS ports (Zap3). The

I've seen people mention that they have fax reception working with Asterisk, spandsp, and app_rxfax. I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest app_rxfax.c (as mirrored by friendly list members recently), and libtiff 3.5.7. Asterisk is detecting the fax signal properly, and executing the fax extension in the dialplan. The fax part of the dialplan is pretty

I am having a problem with SpanDSP. What happens is when I send a fax to SpanDSP the fax message seems to fail in the training phase. I think it's a timing error, however I have no idea about how to rectify the problem. I have included a copy of the log below. I am using a Digium TDM-400P card with 2 x FXO ports and 2 x FXS ports. The fax is connected to one of the FXS ports (Zap3). The

Dear Steve after a lot of compile from spanDSP first version to K and after i have compile * HEAD and Stable i cant understand where im wrong... - Mandrake 9.2 - libtiff3-3.5.7-11mdk I have add Header from your FTP but the result is this error.. Can you give me your opinion? Thanks in advance Dimitri -------- -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in

Rxfax answers, makes handshake, and crashes once the page starts to send. It receives a .tif file of 8 bytes. Asterisk dumps core - gdb shows : #0 0x281fd86c in t4_rx_putbit () from /usr/local/lib/libspandsp.so.0 #1 0x281fea3c in fast_putbit () from /usr/local/lib/libspandsp.so.0 #2 0x28208324 in decode_baud () from /usr/local/lib/libspandsp.so.0 #3 0x2820893f in process_baud () from

I'm trying to install the RxFax in Asterisk. After much trouble getting app_rxfax.c (and friends) compiles and installed into Asterisk (thanks to the many asterisk-users messages) it did get it installed. I have been unable to receive a legible fax. app_rxfax provides lots of debugging information but none useful to me. I was hoping that someone has an idea what might be going on.

Initial handshake sounds fine, but asterisks dies before receive of the fax. Here is the log : Changed from phase 0 to 1 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow

Hi, so far I had our PRI line connected via Digium TE410P and ZAP channel to asterisk which worked perfectly. I now have a second line coming in through a H.323 gateway and chan_oh323. rxfax() still works and receives faxes with G.711 alaw codec, but I always get one empty first page via H.323 - a one-page-fax becomes a two-page-fax with one empty page in front of it. It seems the empty page

On the /proc/zaptel it was lost interrupts, you haven't got any so that's good! On opencall.org there's a known issues link and that mentions some fax machines that have issues, might be worth a quick check there. I can receive from our fax machine this end, if you'd like I'll send you a test fax if you send me your fax number, if you can receive from us and tpc then it's

Dear Steve i have try SpanDSP from the first version to the last one (1k) with my Canon FAX and with my modem but every time i see a lot of message like this: ----- I send a Fax from my Canon B150 i have the following error: -- Starting simple switch on 'Zap/33-1' -- Executing RxFAX("Zap/33-1", "/home/user/testfax.tif") in new stack Changed from phase 0 to 1

Sorry to bore you more with the clock issue, but have you check /proc/zaptel/<span> to make sure it's not missing interrupts? There's also an option to record the audio for the fax, you could listen to that vs a recorded file that will receive correctly on a fax machine and see whether there is an obvious difference? (Good luck, that'll be really scraping the barrel!!) Does it

Hi, I have successfully compiled spandsp 0.0.2pre10 with * 1.05 which can accept inbound fax calls. However, all fax received are incomplete (the first 10% of an A4 page is fine, the remaining is either missing or garbled). I suspect this is due to 'training error' (see below) which, according to Steve Underwood's postings, cannot be resolved further. I wonder if it would help to

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Hello, Anyone else experiencing problems with the latest spandsp (pre3) and last libtiff beta? I'm getting 8 bytes long file, with the TIFF header only during such connection: -- Accepting call from 'XXXXXXX' to 'YYYYYY' on channel 0/2, span 1 -- Executing SetVar("Zap/2-1", "FAXFILE=/tmp/foch.tif") in new stack -- Executing

I use http://www.voip-info.org/wiki-Asterisk+callingcard You only should compile the prepaid.c (look at readme file). Regards. Julio ----- Original Message ----- From: <clive18@webmail.co.za> To: <juliom@telelinkusa.net> Sent: Tuesday, April 20, 2004 12:47 AM Subject: fwd:Re: [Asterisk-Users] Asterisk prepaid debug > Hi > > Which pre-paid app are you using?. > Is it

Hi, Several people have reported problems sending faxes from spandsp-0.0.1k to Canon FAX machines. A spandsp user had the same problem with another make of FAX machine, and traced the problem to a bug in the file t30.c of spandsp. Line 542 says s->t4.rx_file[0] where it should say s->t4.tx_file[0]. This fixes his problem, and I suspect it will also fix the Canon fax machine problem.

apologies as i forget to mention to the receiving device connected to PSTN is x100p fxo i/f ----- Original Message ----- From: "Graham Turner" <ipcomp1@gotadsl.co.uk> To: <asterisk-users@lists.digium.com> Sent: Friday, September 24, 2004 1:12 PM Subject: latest cvs / spandsp > i am experiencing errors with the rxfax application when receiving faxes > from a

i am experiencing errors with the rxfax application when receiving faxes from a 'brother' fax device. the rxfax application picks up the incoming fax but the subseqeuent 'negotiation' process seems to fail with the messages logged to the asterisk console as below; fast carrier up coarse carrier frequency 1697.01(8) training error 666.008746 traininig failed (convergence

Here's one last plea for help from the list before I give up on the totally cool software FAX modem concept in complete despair (for now, at least, until I have more time to dig into it).... I am simply not able to successfully receive a FAX no matter what device I transmit from or how I bring the call into Asterisk. My lastest effort was a call from a Pitney-Bowes FAX machine into an X100P