similar to: defold usernames in asterisk@home version 6

Hello All, Has anyone successfully gotten the Click to Dial to work in SugarCRM in the latest AAH? I keep getting 'Invalid Channel' but I cannot figure out why. Thanks! Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050607/b18b3743/attachment.htm

Hello all, I am having trouble getting my IAX based Voip provider setup. Any pointers are welcome. So here is the deal. I am registered up and I can make outgoing calls but incoming calls fail. Configs all look good I thought. My PBX is behind our firewall with a direct NAT of one to one for an external IP. IAX port is forwarded UDP and TCP to the internal IP. * shows good registration and

On a similar note, I have a server with 1GB of memory that seems to never release the memory back to system use. The system is AAH 0.9. Dual AMD Athlon. This system does IAX out ot my voip providers and has 2 TDM400 cards in it for connection to my POTS lines. I never have more than 10 calls active at a time. There is no transcoding. It is all uLaw. Does anyone out there have a problem where

Can I have a TDM400 and a T100P in the same machine? I am using AAH and trying to combine two boxes. If so, can anyone tell me the proper config for zaptel.conf and zapata.conf? Thanks! Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051006/061d9d84/attachment.htm

dude it's gotta be something with your system. Im using same setup at home with a TDM22 with no probs. Asterisk@Home 1.5, Compaq Deskpro EN P3 500, cordless phones. You did a ton more than I did, I basically plugged everything in and installed a@h.Worked first try. Hate to say it, but would it be possible to try a different system? Even an old system as long as it is PCI 2.2. The big clue

Hello All, I am trying to set up faxing using Asterisk@home 0.6. I have followed the instructions to the best of my knowledge. When a fax comes in, the system seems to detect OK but does ot manage to make the fax to pdf to email leap. Here is what I saw in the CLI when I tested. Any help would be appreciated. Thanks! Wiley -- Starting simple switch on 'Zap/2-1' -- Executing

Hello all, For some reason I am not showing registration in SIP. Can anyone give me an idea what can cause this? asterisk1*CLI> sip show registry Host Username Refresh State -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/bd3a7577/attachment.htm

Hi all, We use AAH to run our office telecoms registered with two Sipgate accounts. Today, Sipgate appeared to have had problems with their server with oneway audio on every call. In order to cause the Sipgate message service to pick up in stead of our AAH box, I simply unplugged the network cable. We now have problems where AAH does not seem to access the network. I plugged the network cable

First encounter with * Just downloaded & installed aah-2.7 Started up AMP, but i can not find any reference towards isdn. I presume there has to be some configuration done for my Eicon-Diva-pro. Does aah actually support isdn-bri? On the mail-archive i found some references, but these are rather old ( they speak about the coming release of aah-2.1) aah-handbook (version 1.6) doesn't

Hey all, is it safe to run the asterisk-update.sh script that comes with AAH to upgrade only the asterisk binaries? Doug has chimed in a few times saying 'upgrade' when I post problems, but Aah makes this really painful. I'm using AAH 2.0 & am fighting a number of 'bugs' that only seem to be manifesting in my installation. Can I safely upgrade just asterisk and not any of

Please check the Wiki (www.voip-info.org) and the list archive by Googling site:lists.digium.com <search string> Also, please include some more info. That is probably why you got no answer... Is your machine sitting behind a router or is it directly connected to your broadband (assuming)? If the machine is behind a firewall, the IP change should not be so profound. It would just take a

Hello All, I saw some coverage of this in the list archive but no one seems to have posted a resolution. I am using Asterisk@Home 0.06 and when I get a call from LiveVoip over IAX I dump it into my IVR. >From there the call is routed to groups based upon input. However, there is no ringback indicated to the IAX caller. Does anyone know how to resolve this problem? Thanks, Wiley

I'm still a learning but I purchased a dph-140s to test with AAH 1.5. I think this is a rebadged ACT P104SLD which others seem to have working with *. It seems to be configured and registered similarly to the softphones I've been using just fine, but it does not receive or send audio (it will send audio to vm), or perform the loopback test. It seems to signal and receive calls fine. The

Is it me... or is it voipjet? This week I've been trying various providers, just can't seem to get voipjet to work. I signed up with voipjet but so far can't get it to work inbound or out bound. I always get 'all circuits busy'. May 12 22:27:05 VERBOSE[2442]: -- Executing [1;36;40mDial[0;37;40m("[1;35;40mSIP/101-ad89[0;37;40m",

Hello All, I am preparing to get Email to Fax setup on my AAH 0.6 box. While I am finding plenty of doumentation on how to get this done using AstFax, it occurred to me that I may want to ask if anyone knows the mechanism of how AAH currently RECEIVES faxes. I don't want to screw up incoming by installing AstFax. Can anyone confirm that AstFax used for email to fax will run with the

Hi, Just set up AAH 1.1 using an HFC BRI line and 5 IP phones as per http://voip-info.org/tiki-index.php?page=ACT+P104+IP+Phone The dialplan was configured through AMP and has nothing fancy in it. As a first time user of not only Asterisk, but also a PBX, there are some operator teething problems. After much googling & searching of voip-info.org, I cannot find any answers to these

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hi, I recently purchased from a friend 2 Cisco 7905G for testing them with Asterisk. I was able to upgrade one of them with the SIP image, the other hang up during the upgrade process and now it won't boot again. When powered up, the red and green lights keep on and the screen is blank. Does any one know a procedure to fix this ? I do not have a contract with Cisco, I have even call a

Actually, I love my install of AAH 0.6. When something is not available in AMP I just dive into the configs and correct it. Most of the little things ARE available in AMP though so those times are few... W -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of David Sent: Monday, March 21, 2005 9:03 PM To:

Does anyone here use either Gradewell or inWeb for service? They are both UK based. I'm trying to get a couple of inbound IAX2 based numbers from both of them to work with no luck at all. The one thing that sets these guys apart from the rest of companies offering inbound numbers is they tie the account to the IP of the asterisk server. Neither use register lines in iax.conf, there appears