similar to: /dev/zap not created

I have linux 2.6.5 running on my machine.I downloaded The latest version of Zaptel from the cvs repoistory.Compiled zaptel with the "make linux26" option. Installed it by modprobe which gave no errors.However when i did "modprobe wctdm" i got the following error. "FATAL: Module wctdm not found." I have no idea why it's happening.Tried Googling but got nothing.ANY

Hello, everyone After having spent several time to look for any solution for my problem, I decided to write here. Here is the problem got a Digium X101 FXO card and Digium TDM400P alias freshmaker (1 fxs module on it on first port ) in my asterisk box. The X101 works perfectly. The problem comes from the TDM400, when i plug a tested working phone on it , i get no dialtone; the goal is to

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

Two problems, possibly related: Here's the configuration...my Asterisk box has a TDM844B in it; port 1-4 are FXS, 5-8 FXOs. Here are the config files: /etc/zaptel.conf: -------- fxoks=1 fxoks=2 fxoks=3 fxoks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 loadzone = us defaultzone = us -------- /etc/asterisk/zapata.conf: -------- [channels] language=en usecallerid=yes hidecallerid=no

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is there any way to solve, is it a bug thanks

We have 4 analog line and 2 analog trunks. On the trunks we have all the DIDs coming into the current phone system. Trying to get everything moved over to Asterisk but having issues picking up the calls on the analog trunk. We can receive calls on the plain analog lines and we can call out on all analog lines and analog trunks. When a call comes in on the trunk line the ZAP channels don't

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas???

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected

I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. 1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event.

Hopefully someone here can save my sanity. I have been trying to solve this problem for days now, but just cant put my finger on it. Im new to * so I have probably done something stupid! I have a TDM400P with one FXO module and a FXS module. The main problem I have is not being able to get the extension attached to the FXS module to ring or be able to make calls. It gets a dialtone fine but I

I am setting up 2 nufone lines. I want to make them both availiable for dial-out. How do you syntax it in extensions.conf so that it figures out which one is avaliable and dials out on it. Also how do you setup the name part of callerid for the outgoing lines?

after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following: signalling must be specified before any channels are. CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1' Error[4663]:

Hi, I am trying to configure * 1.0.7 box with a Digium Wildcard TE110P T1/E1 and libunicall latest code. All libs compiled successfully and the E1 have a green light! I am able to receive a call (or at least) testcall shows some information when an incoming call is received so the drivers and basic configuration is working. My * box has 2 cards, one TDM400B (2 fxs and 2 fxo) and one TE110P

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

I'm having (I think) timing issues in relation to bridged T1-T1 calls via dynamic spans. Fax calls are intermittently working, but voice is fine. My box has a Sangoma A400 inside it as the primary Zaptel timing source. My T1 PRIs that are hooked to the box come in via a foneBRIDGE2 (dynamic TDMoE spans). PRI #1 is the telco and PRI #2 is an existing Comdial FX-II. For some reason, bridged TDM

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

Hi, I would like to use a digum card to call an external number through my PSTN. I think that I have a problem in the configuration. Asterisk returns me app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' I use Fedora core 3. I installed libpri, zaptel and asterisk. I plugged my line on the FXS module (green part). I make modprobe zaptel && modprobe wctdm without