similar to: Outbound call on TDM400P

I am trying to place an analog outbound call from a Sipura SPA-841 through a * server with a TDM400P and 4 FXO's. When I call in from an analog line everything works fine, I can talk over the SIP phone. When I call out, * says: == Spawn extension (from-sip, [phonenumber], 1) exited non-zero on 'SIP/sipphone-d29d' -- Executing Dial("SIP/sipphone-9eb0",

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

Quick question...Im authenticate all exten except this one(2006). If I call from ext 2006 I still have to authenticate. If I call form any other ext I have to authenticate. Any suggestions? Thanks extex => s,1,GotoIf($[${EXTEN} = "2006"]?3) exten => s,2,Authenticate(731) exten => s,3,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?4) exten =>

I'm looking to add a single FXO port to my Asterisk box. It looks like my options are a Digium Wildcard X100P off eBay for $6.99, or a Wildcard TDM400P with an FXO Module from Digium for $125. Can anyone explain the tradeoffs (other than the ability to put 4 FXO/FSO modules on the TDM400P). What about RTC for the system - I know the TDM400P provides it. Does the X100P? Thanks!

Today I had channel 1 on my TDM400 go to sleep, verified by pluggin in known good telco lines in various combinations on channel 1 through 4 - problem is channel 1, not anything external. So after seeing lots of stuff on the list re: TDM400's I power cycled, removed board and let linux say nothing's home, replaced board, told linux to ignore it etc. No OS/asterisk/etc changes made on

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC

What are peoples experience with the reliability of the TDM400p. Specifically in the 2 FXO, 2 FXS configuration, which is the 022 (?) model. Is this board prone to random failures? joe a.

Hello, Over the past several weeks, we have been having an intermittant problem with our deployment of a TDM400P card (4 fxo). ?We have tried many things, and the problem still re-occurs. The Problem: Occasionally (every 48 hours), the TDM400p card will stop answering incoming calls on ALL fxo ports. ?Attempts to send outbound calls on any Zap channel will result in hearing a loud

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configuration: modprobe zaptel

I have a TDM400P with some FXO ports, and I wanted to connect the two POTS lines from my Pipeline-75 ISDN router into the FXO interfaces on my Asterisk server. Hooked it up, seemed fine, called in and it answered. The problem is when the call is hung up on, the FXO port never drops. So of course then the P75 just holds the line off hook and you get a busy. So it's good for the first

I think I have a bad FXS module on my TDM400P. Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) The zaptel loads ok, but the wctdm reports No such device or address and stays loaded. The

Hey all - we have two TDM400P cards in an SMP Redhat9 box, with 4 FXO ports each running thel latest Asterisk CVS. Users connect to this to share POTS lines using analog phones connected to Sipura SPA-2000 boxes. All works reasonably well, except every day (or more) a line will get "locked up". No other way to describe it really -- the line just stops working, so if someone tries

How come an outgoing call using my TDM400P immediately say the call is answered? I'd like to be able to detect when the call is actually picked up, is this possible? If this is normal with analog cards, does the same thing happen with T1 cards? -L ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football

Hello all We have tested for a mounth or two an asterisk PBX using one T1 channel bank with 24 fxs and one TDM400P digium card with 4 FXO modules. This worked with minor problems, the most notorious being some sporadic static noice or failure in the first FXO module on the wildcard. Now we have a client with 12 pstn lines and 48 extensions and we are trying to deploy an Asterisk PBX server

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

I have a bad echo problem on my TDM400P with one FXO module installed. I have tried a few things, such as: * setting rxgain and txgain to 0 * setting echocancelwhenbridged to no / yes * settting echocancel to 64 / no / yes * setting echocanceltraining to 800 / no / yes * MG2 echo cancellation * MARK2 echo cancellation * KB1 echo cancellation * AGGRESSIVE_SUPPRESSOR option of MARK2 Each time

I have been having some troubles with the zaptel channel on what appears to be the inbound process. The box is running the stable CVS code and has a TDM400P 4-port FXO card in it for analog connectivity. Channel 1 is the only active port on the card at the moment as we only have one analog line. What has been happening is that it looks like Asterisk has been detecting an inbound call even though

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected