similar to: Problem with Avaya 4602 / SIP response 481

I attempted to update an Avaya 4602 phone to the latest SIP firmware and now the phone stops at the bootloader. It keeps requesting an appsip.ebin file from my HTTP server and is no longer checking my TFTP server for update files. Since no appsip.ebin file was included in the firmware update provided by Avaya, I have no idea where I am supposed to get this file. And also since it is no

Hi Experts, I remember we had this discussion before, but could find it. Can I run a command to generate a "Compiled catalog" for a specific node (on the master node)? And apply this on the client node? What are the limitations for doing this? Basically we have special handling for the webserver/CA part of puppet. Thank you very much! -Yushu

After downloading the firmware from a tftp server for avaya 4602 ip phone, my phone console keeps getting message saying contacting http server. according to this link: http://voip-info.org/wiki-Avaya+4602+configuration My phone hangs at "Contacting HTTP Server" while performing a firmware update Either your phone cannot download the sip_4602D01A.txt file (in which case it will

Hi, I'm trying to disable the internal dial plan of an Avaya 4602 with SIP firmware 1.1 but couldn't find how to do it. Even if I configure a custom Dial Plan it keeps adding other builtin rules to my dial plan. Ex: Configured dial plan: DialPlan 19xx|7[8-9]xx|0xxxxxxxxxxxxxxxxxxx+ Reboot. On the syslog it shows: Aug 17 12:42:12 192.168.0.115 DigitMap:

Does anybody know if Avaya has a test SIP firmware available for 4620 and 4640 IP phones? The 46xx SIP image from their website is a combo download with SIP for the 4602, and h323 for the the 4620 and 4640. It looks like they demo'd a SIP image for the 4640 as far back as 2004: http://www.sip.org/von/2004/boston/slides/DSC_0042.php Thanks, Andy -------------- next part -------------- An

I think I am the first to use the $135 Avaya 4602 SIP phone, but I need some support from the community to fix one problem I have with it. The phone stops working after about 20-30mins if I have mailbox=context in Asterisk; when I do have mailbox=contect in asterisk the sip debug returns "481 extension does not exist." Anyone willing to help me figure out why? I.E. Is it an Asterisk

Hi, I am trying to use an Avaya 4602 phone, which I just updated from a very old SIP software to the latest I could find on avaya's site (032207). The upgrade went fine and it gets registered on the Asterisk server. Now, a couple of glitches, though. - The phone's web server is not working ... so I have no easy way to configure it. It used to work with the old release of the software. I

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

Hi everybody, I am testing Optipoint 400 Standard SIP (Firmware 2.3.14) with Asterisk. It is posible to dial from another Phone (x-lite) to the Optipoint, but when I try to dial from the Optipoint there is no dialtone and there is only a short beep when I dial Numbers. The Optipoint shows "no Server..." (Registrar?) in Display. Sip debug shows no unusual (to me) Messages. Sip show

Hi guys, I installed asterisk and it's working really well. For now I`m using soft phones IAX and SIP but now I want to use the regular IP phone, what I have now is Avaya 4624 and I didn't find a firmware for SIP for this particular phone I believe now is working with H.323, can please someone advice me if exist firmware for this phone to register SIP or IAX2 with my asterisk box, and to

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

Hello to the list! I was trying to follow all the FAQ and guide about it but I still didn't obtain the result. I'm using the samba4 obtained with apt-get and Samba_internal as dns solution. I attached the importants file of my last attempt but the result is always the same. Samba 4 is working properly because the shared folder is visible from the other Windows 7 PCs of the network and

Currently I am having 2 issues with my Avaya 4602 phone: First, the phone registers with my Asterisk server, but when I start dialing I get a busy signal after 4 digits. I specified in the dialplan on the phone to expect 10 digits and that solved that problem, but I still immediately get a busy after the 10th digit. The phone never sends a dial command to asterisk. Second, asterisk is

Does anyone know of a AGI script that takes advantage of the weather sound files that's included with the extra sound files available from www.loligo.com/asterisk/sounds/ <http://www.loligo.com/asterisk/sounds/> ? Thank, Jeramie -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

Debian Latest stable. Linux newton 2.6.18-4-686 Samba 3.0.24 PDC 3Com 3812 Gigabit switch (connection between WinXP client & server) Others connect through 3Com 3225 100 Mbit -> 3Com 3812 -> Server Windows XP SP2 fully updated. F-Secure client security (look down for firewall settings) In advance, thanks for reading this. Any suggestions are welcome! I'm having a hard time here.

I would like to have the ability to have Asterisk announce the temperature -- not using TTS -- within the dialplan. For a non-Asterisk project, I have a cron job that periodically pulls down an XML file from weather.com containing local weather data (TWC's user agreement requires that data be cached locally). Using sed, I also create a text file that contains only the numeric value of the

Can be done calls from each system? How about to capture data with Wireshark? I have experiences Asterisk with Panasonic with H323 without any problem. Mc GRATH Ricardo E-Mail mcgrathr at mail2web.com

Does anyone know if the Avaya 5610 supports SIP? I cannot even find the phone listed on the Avaya support site. Anyone have an example config? Thanks.