similar to: Re: Cisco 7970 Won't boot after factory rese t

Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? Thanks

> thanks, using your example, and this url: > http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186a00800dea82.shtml <http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note 09186a00800dea82.shtml> > I got it to work... then I realized that there's no way the SIP phone > on asterisk is going to get the MWI ( message waiting

Hey Everyone, I downloaded and installed the X-Lite softphone the other day (the lite version) and cannot seem to get it to work well. Don't get me wrong, it registers with my asterisk server and everything seems to work well, except the call quality really is horrible. I thought it may be the place I was trying it at (DSL) so I took it to the office and tried it right next to the asterisk

Hi Everyone, I read through the list on the issues with the ztdummy driver which I need for MeetMe, but I seem to have come across a problem that I cannot seem to find an answer for. I am running Gentoo 2.6.10 on an Intel box. I have read the the wiki entries on the ztdummy and followed the instructions as they relate to the 2.6 kernel. Everything compiled great, but a modprobe ztdummy

Have Asterisk us at running fine, but have run into a small snag. It's not emailing the voicemails to the users. I have attach=yes set, sendmail is configured and works from from the commandline (sent an email to myself). Unless I'm wrong, or missing something, asterisk is configured by default to send an email when a users receives a voicemail, correct? Thanx A

Hi Everyone - I have webvmail up and running, I can see the messages, forward them, pretty much everything but listen to them. Here is what I see in my logs: 192.168.0.1 - - [25/Feb/2005:08:15:40 -0800] "GET /vmail/vmail.cgi?action=audio&folder=INBOX&mailbox=2377&context=default &password=000012&msgid=0000&format=gsm&dontcasheme=4624.gsm HTTP/1.1" 200 9438

Guys. Anybody has developed and asterisk brochure for commercial purposes (consultant, etc) that I might be able to take a look at?

Our main asterisk box peers with that of a customer. We are trying to assign DID's to their extensions but get this error. What are we doing wrong? Client side Mar 25 18:49:47 NOTICE[1369]: chan_iax2.c:6545 socket_read: Rejected connect attempt from 203.xxx.xxx.16, who was trying to reach 's@' Our side Mar 25 18:56:15 WARNING[705]: chan_iax2.c:5546 socket_read: Call rejected by

How do I route all the outgoing calls through a SIP gateway, this should send more than one outgoing call to the sip gateway at once. please show me the sample configurations on how to do this. my SIP gatway can accecpt direct IP traffic or SIP proxy traffc. Thank You Kanishka -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have let's say a reception that is comprised of 2 zap extensions and a mobile phone to dial using ISDN through Capi. I want to have a delay before starting dialing the mobile phone so that it rings only when the call has been unanswered for say 25 seconds. I tried to use Capi/2106994444:ww6935555555 but without any success. There is any way to do it or the code has to be modified ? Thanks

For anyone playing around with IAXy(S100i) devices, I am making the following available: Windows IAXy Provision v1.00 This is a from-the-ground-up development of a means of provisioning IAXy devices using a Windows environment. For some users, being bound to Linux for IAXy provisioning is not viable or convenient in some cases. This application provides a GUI data entry for the various IAXy

I have a [start] context that all my inbound and '0' calls are routed into. Because of the way I want to set my system up, I want to prompt the user to enter a 1 if they know the extension, or a 2 for a directory and nothing else. It works, however there is a 5 to 10 second delay after enter the 1 or 2 before the system responds. I have read over the wiki on how asterisk handles digit

Hello List, Does anyone have access to the soft key configuration files for the Cisco 7911/7941/7970/7971 phones? Checked up on the Cisco site and didn't find much up there. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part

Hi, I'm after two very specific ringtones for the 79xx's... A dog barking, and a horse either galloping or neighing. I've tried making the sounds, but for some bizarre reason they're not working. I used to make quite a few ringtones for the 79xx's, but I seem to have forgotten how to do it! And to top things off, I can't even find the documentation on Cisco's site

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

There was a thread a few months ago that tossed around some ideas for using a cisco phone for intercom or paging. I don't have any ip phones, and wondered if anyone had any luck getting intercom or paging to work on the cisco units. Do any of the (cheaper) ip phones have a way to support intercom or paging? I presume that it's not part of the SIP or IAX protocols. Chris.

Hey Everyone, I am using NuFone for 866 inbound service and I am trying to figure out the callerid part of it. Any call into my * system just shows "Toll Free Call" and will not give me the calling party's caller ID info. Is this just something I have to live with using NuFOne, or did I miss some type of config in * that will grab the callerID other than the inbound 866 number...?

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the