similar to: TBM400 no callerid on incoming calls?

Hi all, I've been trying to wrap my mind around this one for several days now. How can I 'debug' the CallerID reception on a Zap/POTS channel? I have a POTS line with CallerID and a Digium TDM11B card right now. I have my signalling set to ks for both sides, can make and receive calls just fine. But I never get CallerID on incoming calls. I get the following messages: Aug 11

Hi list, I have a server running a simple hfs isdn card running with chan_misdn. the problem is, I can't get asterisk to pick up the phone, outgoing calls work fine. when running asterisk with -vvvvvvvvvvvc I get the following "log" when I try to dial the isdn server. P[ 1] * Starting Ast ctx:kpn-in dad:0594643637 oad:0878722291 with 's' extension P[ 1] MGMT: SSTATUS:

Hi list! I'm not getting incoming CallerID in The Netherlands on my TDM11B. Everything was configures according to the docs at digium.com. The error on the console is this: Feb 13 16:49:40 ERROR[16123]: callerid.c:260 callerid_feed: fsk_serie made mylen < 0 (-84) Feb 13 16:49:40 WARNING[16123]: chan_zap.c:5396 ss_thread: CallerID feed failed: Success Feb 13 16:49:40 WARNING[16123]:

I have a TDM4xx card with two (3 and 4) interfaces for my land lines. I have a basic setup working with them and one VoIP provider. Questions: 1. How do I determine which Zap line the incoming call is on so I can handle it differently? One line is my home phone and the other is my work line. I would like different dialplans for each. 2. When I have my work line set (via Verizon) to call

Hello. I have another issue. When I call in, everything is processed correctly, including voicemail, but I don't hear any ringing/ringback. exten => s,1,Zapateller(answer|nocallerid) exten => s,2,NoOp exten => s,3,Playback(pls-wait-connect-call) exten => s,4,Dial(${PHONE1}&${PHONE2}&${PHONE3}&${PHONE4},15,Ttm) exten => s,5,Answer exten => s,6,Wait(1) exten

Hi, I'm using a ISDN-30 E1 line from KPN Belgium. The challenge is to get a correct CallerID on outgoing lines. When I put this in my dialplan: exten => _0.,1,Set(TEMPVAR=${CALLERID(num):1}) exten => _0.,2,Set(CALLERID(num)=144622${TEMPVAR}) exten => _0.,3,NoOp(${CALLERID(num)}) exten => _0.,4,Dial(Zap/g1/${EXTEN:1},,) The resulting CallerID is accepted by the telco, but on

Hi list! I am installing an * box that will be installed on a site with KPN BRI ISDN in The Netherlands. I am using bristuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode

Hi all, I want to pass the incoming SIP callerid in Dial application: Asterisk 1.2.13 sip.conf: register => user:pass@provider/ext extensions.conf: exten => ext,1,Dial(SIP/phone1&SIP/phone2) on phone's display I see the 'ext' number, not the incoming SIP callerid as can be seen on incoming calls when I register the phone directly to provider. I tried to add

Hi all! I am in the same situation here in Sweden, but I just got the X100 card and don t get it to work with DTMF caller ID. Is the only way to solve this to buy a TDM400 card w FXO modules? Is it just a driver question or a HW issue with the X100 card? Where to find dok about the new keywords in conf files like "cidstart=polarity" in zapata.conf? rgds Gunnar >>>

Hi to all, I have a question about the callerid (msn number) off calls comming FROM a queue. This is my setup: - ISDN using zap (zaphfc) - Incomming calls arrive in a queue - One of the members of the queue is my cell phone... member => Zap/g1/XXX73XX19 (X to protect my privacy ;-)) The problem is the call from the queue to my cell phone. In a dailplan i can set the outgoing msn using

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Hi list! I have a TDM11B (DevKit). When I start asterisk everyting is working fine. However as soon as I do a RELOAD from the console the FXS port stops working. I have a phone connected to it, when I pick up the phone after issuing a RELOAD I get this on the console: Jun 1 20:27:38 WARNING[14316]: pbx.c:2357 __ast_pbx_run: Channel 'Zap/1-1' sent into invalid extension 's'

Hi, I have an X100P which receives an analog line from another PBX. These are the relevant entries in extensions, PHONE1=Zap/1 [macro-extensions] exten => s,1,Dial(${ARG1},20) exten => s,2,Voicemail2(u${ARG2}) exten => s,102,Voicemail2(b${ARG2}) exten => s,103,Hangup [home] include=>tozap exten => 2201,1,Macro(extensions,${PHONE1},${PHONE1VM}) exten =>

I'm hoping someone can help me out with this. I am basically just trying to separate my outbound and inbound calls into separate contexts instead of having everything in a single context. Any help would be appreciated. Perhaps I've missed something really obvious.... Here is the network layout: <remote> <--TDM400P--> <nattedbox> <--IAX--> <liveipbox>

I recently purchased a TDM11B so I could hopefully hook flash the FXO from either the FXS (on the TDM11B) or a SIP device. From the FXS, I've tried hitting # then transferring to an extension that flashes the line then dials the FXS again (3020). This seems to send me to a busy signal and the console tells me no such host of 3020 (the number I'm on). The call on call waiting gets sent

Hi, Has anyone managed to create a setup with a Sipura SPA-1001 as a client? Right now I can connect to the device by dialing the extension number but when I try to connect from the phone handset to make an outbound call it gives an unavailable tone. I'm using Line 2 on the SPA-1001 to connect to the local asterisk server, line 1 is used to connect to my VOIP provider until I can get the

Hi All ... I'm running Asterisk 1.2.13-BRIstuffed-0.3.0-PRE-1v which has a Junghanns QuadBri card in it (lspci reports Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)) I have a regular KPN ISDN2 Line connected which works fine with the the zapata.conf below. However, I also have a new KPN ISDN Mutli (meervoudig) line (PBAX-Group), which works fine for incoming calls,

Hello all, Recently I purchased an QuadBRI card from junghanns.net after some playing around, reconfiguring dialplans etc with the exception of 1 thing everything seems to work: I seem to be unable to set the outbound callerid. The dutch telecom operator (KPN) provided me with 4 MSN's on 1 BRI interface. In the past years I'm more then used to setting the MSN without the leading 0, this

Dear All, All these days I was ahpppily using Asterisk with TDM11B, but from today all of a sudden asterisk has started acting strange. The telephone device connected to channel 1 rings continously, following info is displayed on console -- Starting simple switch on 'Zap/4-1' Jan 28 15:38:58 ERROR[77024176]: callerid.c:261 callerid_feed: fsk_serie made mylen < 0 (-8) Jan 28

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the