similar to: problem with swap and upgrade to 4 from 3.3

Due to recent experiences, and discussion on this list, my colleague and I performed some tests: Using solaris 10, fully upgraded. (zpool 15 is latest, which does not have log device removal that was introduced in zpool 19) In any way possible, you lose an unmirrored log device, and the OS will crash, and the whole zpool is permanently gone, even after reboots. Using opensolaris,

Everyone, I was recently given a Dell raid 386 server that had drives that had gone bad. I replaced the drives with a couple terrabyte sata Seagate drives, and set up the bios for a mirrored raid configuration. I was able to install Centos 5.2 without difficulty, but when it was time to perform the 1st boot it went to grub instead of booting off of one of the mirrored drives. I could not

Hi Folks.. I have a system that was inadvertently left unmirrored for root. We were able to add a mirror disk, resilver, and fix the corrupted files (nothing very interesting was corrupt, whew), but zpool status -v still shows errors.. Will this self correct when we replace the degraded disk and resilver? Or is there something else that I''m not finding that I need to do to clean up?

Hi There, I have approx 4 machines running centos 4.2 and would like to run a local yum repo for them. Is there a quick and dirty way to do this... Thanks in advance Pete

Dear All, anyone installed IMP4 on Centos 4.1 yet, http://www.horde.org/imp/4.0/ if so what problems did you have, I have a webmail server I am going to upgrade to Centos 4.1 and Imp 4 from its current centos 3.3 implementation and imp3 This is going to be a labour intensive manual task, and I wondered if anyone else out there was mad enough to have tried it already.... Failing that just

Dear All, I need some witty computer related proverbs or one liners that some of have used in the past as footers for your emails for example. I particularly remember a PERL based transliteration joke/footer that when run in PERL produces a witty output.... This is to fix a problem internally created by an over zealous salesman at my company pinning up A4 sheets with bullSh*t sales proverbs

The laws already exist: Disturbing the peace, Misappropriation of public funds, Prohibition on unfunded mandates. What's lacking is prosecutors, judges, and juries who see the politicians as getting in the way of the statesmen and the people. To drag this back towards On Topic, it seems to me that the ntp folks might be petitioned to write up and submit to the Congress, a paper

Dear all, It seems that wget version has had the -C (cache) option removed when it went from 1.9 to version 1.10, this happened somewhere between Centos 3.5 and 4.2. Does anyone know why the -C option was removed and how I can get it back? Other than regressing wget..... Regards Pete

Hi, I am now running Samba services to a network of 200 or so PC's accessing a central UNIX filserver and overall it is a success. There are just a few niggles however. I'll email my smb.conf later if this is required but I guess this may be a common newbie problem. Users all have a home directory mapped to their Z drive. This is okay, but if they try to rename a file (right click

the following occurred inadvertently and brought R-1.1.0 down rep(1:3, c(4,2,-6)) Segmentation Fault (core dumped) platform i686-pc-linux-gnu arch i686 os linux-gnu system i686, linux-gnu status major 1 minor 1.0 year 2000 month June day 15 language R

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Everyone, Will samba handle printing to a printer connected to the network with a jet direct card. I currently print to a locally connected laser jet 4 plus and need to add a color printer as well. Will samba handle printing to an IP address or is the only solution to try and add another parrallel port. I am running RH 6.1 and Samba 2.06. I

From: Rodrigo Barbosa <rodrigob at suespammers.org> > Btw, don't quote me on this one :) > I'm only 90% sure of the hotswapping capabilities, and less than 50% > sure about the price :) There _are_ systems with hot-swap CPUs, memory and/or, PCI[-X] slots. They are _not_ commodity and pricey, and require OS-level support. In fact, I believe Linux 2.6 has some support for

hi guys I need to get llvm to support vliw architecture. Can you please point me in the right direction. we have managed to get it to compile into simple assemble and now need it to be able to schedule the instructions in parrallel. any help would be appreciated Regards Junior

Feizhou wrote: > I completely disagree with you here since I use grub over pxe to > install/boot my servers and avoid any local bootloading problems. From: Peter Farrow <peter at farrows.org> > In one sentence, grub is poorly documented, over complicated pants, and > lilo ROCKS... At the risk of offending even more people by suggesting a "middle ground" where

We currently have a Toshiba Perception EX and I would like to start moving toward VOIP. Is there anyway we can run these two systems in parrallel? Better yet, is there anyway we can run fully on asterisk using the current PBX hardware? The current PBX has a mix of analog, digital and electronic cards in it. I tried to google for advice but I didn't find anything that pertained to this.

Dear All, I just upgraded my firewall/smarthost to a 2.6 GHz P4 on a Gigabyte board with the ATI RS350 chipset. Unfortunately the chipset isn't support on the kernel and I get slow disk performance lspci gives this: lspci 00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP PCI/AGP Bridge 00:13.0 USB Controller: ATI

Hi There, I recently suffered a serious hardware failure on one of my firewalls, (motherboard died), this machine was originally a redhat 9 box, on an Athlon 2200 with 512Megs RAM, this machine was doing the following jobs for a small network at a relatives house: Firewall (IPTABLES) Transparent proxy (squid) Sendmail smarthost IMAP mail server SAMBA file server IPSEC tunnel to my home. The

Dear All, I have two AD domains, one running on Windows 2000 and one running on Windows 2003. Each with XP clients, and no trust. Ihave a linux file server running samba 3 on Centos 4.2, the smb.conf file specifies that security=server, and points the password server to the operations master on the Windows 2000 domain. All clients and 2000 servers on the Windows 2000 domain, (xp or

Heya, I'm new to all things linux and wine, so forgive my noobiness. I've installed World of Warcraft in wine by extracting the cds to the same directory and ran install.exe; that ran fine besides an error at the end saying that it couldn't add WOW to my add/remove programs. When I try to run it however from ~/.wine/drive_c/wow/WoW.exe I get the following: Code: # wine WoW.exe X

here is a distillation of a problem encountered in transfering some working code from R-0.63 to R-1.1.0 a1 <- 1:10 b1 <- tapply(a1,a1, sum) c1 <- ts(b1) c1 Error in if (NCOL(x) == 1) { : missing value where logical needed note that the error is returned as the value of calling ts() and is not automatically displayed problem seems to be that is.array(b1) returns TRUE yet dim(b1)