similar to: Grandstream setup woe and solution

I've some code to manipulate incoming Caller-ID - so its suitable for replying to... [sipdef] exten => s,1,NoOp(FWD SIP: "${CALLERIDNAME}" <${CALLERIDNUM}>) ; Alter incoming calles from pulver - add a '87' exten => s,2,Gotoif($[${CALLERIDNAME} = ${CALLERIDNUM}]?3:4) exten => s,3,SetCIDName(87${CALLERIDNUM}) exten => s,4,SetCIDNum(87${CALLERIDNUM}) exten

I think what is missing with asterisk is what I'd call a 'working' demo. Its real cool getting the 'Welcome to asterisk' demo running... I think that there should be a 'make basic-plan' that would generate some well commented '.conf' files that set up a basic working systems with.. Two phones for Support Two phones for Sales Two phones for Accounting Voice

-- Executing DateTime("SIP/phone1-07ff", "") in new stack -- Playing '/var/lib/asterisk/sounds/digits/day-1' (language 'en') -- Playing '/var/lib/asterisk/sounds/digits/mon-3' (language 'en') -- Playing '/var/lib/asterisk/sounds/digits/h-19' (language 'en') This works - the pathname is complete - Joy.

I have some Grandstream BT101 SIP phones. Work great (so far). I have some "Planet VIP-101T" H323 phones... how do I make them look/feel/act like a SIP phone ???? I can dial to them from both Trunk + SIP's (ie - I've added 'oh323' libraries) What config do I add so that if I dial the * IP - they then at least act as an extension? Ideally I'd like to just pick up

Playing with time ranges - using the examples found in one of the asterisk cook books... (pdf - page 17) ; After Hours include => night_menu|00:00-08:00|Tue-Fri|*|* include => night_menu|17:00-24:00|Mon-Thu|*|* this gives... ... pbx.c:2962 get_timerange: 24:00 isn't a valid end time.... -- Including context 'night_menu|17:00-24:00|Mon-Thu|*|*' in context 'default'

I'm sure I saw a posting about someone updating the CVS with a more richly featured voicemail system. What happened? Am I wrong? Can't seem to find anything on this... -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

I have a 'day' and a 'night' mode. In the day mode, I play a 'background' message which is interruptable by the pushing of a DTMF key - ie - all is normal. In night mode - I decided to get smarter... I play two backgrounds with a 'sayunixtime' in between and now DTMF does nothing - the menu times out to my 'lets get the operator then'... If I change the

I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a call with '*8' - the call will drop after about 20 or so seconds. Is this a general problem with Asterisk 1.0.2? As this is the latest release that it appears Klaus-Peter Junghanns has for public consumption - is there anything I can patch for just this problem - or has Klaus-Peter Junghanns (or anyone else) been

I'm using a SNOM 360 with Ver 4.3 software. Asterisk is.... Asterisk CVS-D2005.05.02.22.00.00-05/04/05 (BRI Stuff + Head) I've used the wiki info to set up some lines to monitor some internal extensions. When the extension is rung - the lamp comes on, when the call is answered, the lamp goes off.. I was expecting something a little more exciting - like the lamp to flash when the

I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express. (or AEX844 - 4FXS & 4FXO) I downloaded Asterisk Now - and have got this loaded on a new motherboard (Intel with 3 PCI, 3 PCI Express - etc). (Downside on PCI-Express is the physical support the express slot gives (very little) compared with an 'old' standard PCI slot!!!) With only this card in the box....

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

I've got asterisk able to make and receive calls via the Internet via E164 lookups. If I get such a call - I'd like to display the original phone number on my phone. In the log is the following - which displayed '601' on my phone. The caller was +886288097680 - am I getting the wrong ClID because of my end or the caller end?

Whilst on a call, I'm getting the following... -- Started music on hold, class 'default', on SIP/phone3-a7d5 -- Playing 'pbx-transfer' (language 'en') -- Unable to find extension '#' in context 'default' -- Playing 'pbx-invalid' (language 'en') ie - without anyone pushing keys - I hear the music on Hold - as does the

I have a Grandstream GSX-2000 with .. Software Version: Program-- 1.0.0.3 Bootloader-- 1.0.0.3 I tried to do an HTTP update from the Grand Stream web site... After half an hour, I recycled power and now its dead... LED's come on and stay on, screen and buttons are dead. Connectivity to Grandstream.com was always good - whenever I checked (I downloaded the "User Manual" in a

FYI for anyone using the dual ethernet ports on a Grandstream BT102. I'm using a BT102 connected to an HP2524 10/100 switch, which has an asterisk box connected directly to it. No VLANs defined or in use. Measured bandwidth: PC -> HP Switch -> Asterisk : actual throughput measured at 94.1 mbps. PC -> BT102 -> HP Switch -> Asterisk : actual measured at 8.86 mbps. The

Location = US asterisk/zaptel from CVS. Updated last week some time. Currently rebuilding with todays checkout. I have 2 fxo channels hooked up to outside standard Bell South phone lines. If I configure as so [channels] context=pstn group = 1 signalling = fxs_ks callprogress = yes channel => 4,3 Then any call routed from asterisk to the outside line will ring, and can be picked up, but *

What I've got... Software: Linux: Slackware 9.1 Asterisk: out of CVS - so its new. isdn4k-utils: to test the ISDN Card Hardware: PII Pentium 400Mhz (Its a test of concept machine) with 320Kb RAM 1 x ISDN BRI Card - DIVA EICON (Installed + working) 2 x Grandstream (Barbie?) BT100 SIP Phones. What Works.. I can call from one phone to the other... get read voicemail... I can

I Purchased 4 licences for my SCSI only machine. I do have a CDROM - with a mounted CD. The Registration binary gives me a 'Segmentation Fault'. Is this like telling me I can't register the licence? Unfortunately - I only seriously scanned the mailing list after buying the keys.... Seems like the licence insists on using an IDE drive to create some sort of unique serial number.. Has

If I want to send outgoing DTMF over a BRI interface, can I do it with 'isdn4linux' or must I use the 'capi' library? -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part -------------- A non-text attachment was