similar to: BroadVoice Outgoing CallerID

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

Which would you recommend as far and quality and pricing to connect to asterisk (including DTMF issues)/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/bf7bf081/attachment.htm

I am thinking of dumping broadvoice so I need some other VoIP providers that have a las vegas DID and a service better than broadvoice. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050131/bf4b1c31/attachment.htm

I am going to buy some IP phones from them but I sent them an email couple of weeks ago and got no reply. Has anyone ordered anything from them? Any other places that I can buy from? Sorry if it's a wrong post. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050517/ba256d25/attachment.htm

Hi, I got a broadvoice "business" account under the byod(bring your own device) program. I have applied the patches and created new asterisk debian packages. I have the account working on inbound and outbound. The problem area is outbound caller ID. I have 3 other accounts with IAX2 providers and have no problem setting the caller ID on outbound calls. I called them and they

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

My router (1605R) currently does not support QoS. Is there any open source software available so that I can set one up before the router? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050118/38b6e3f2/attachment.htm

Hi, I am thinking of signing up with voice pulse connect to connect to my asterisk server and using it as a regular line. Is it good? Or should I go with vonage or others ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050124/16792f10/attachment.htm

Hi, We are looking towards a 8+ CO line setup (20 extensions) in our office but we do not want an IVR(auto-attendant) feature. All incoming will be answered by a receptionist. I have read the multi-line configuration for cisco 7960 thread in this list but that way I believe we could only display 6 incoming lines. What will happen to the rest? Does the expansion module for the cisco 7960 work

I believe the 911 is a serious issue if one does an asterisk installation in an office. How do you test 911? Won't they arrest you or something for dialing 911 for no reason and talking to one of their agents who could have taken a more important call? On the other hand what an emergency comes up (like someone got seriously injured) and on top of that asterisk crashed all of a sudden

I have a Asterisk @home ver 1.0 running with a TDMB11 card. Several sip extensions and a regular phone connected to the box. All routing works fine from the regular phone connected to the box, whether its going to FWD, broadvoice or the PSTN. The problem I am experiencing comes from making calls from the sip phones. They get routed correctly to the sip and iax trunks but when making calls

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

I have been looking around for Outlook Integration for Asterisk. Saw the Asterisk TAPI wiki page and also ran across this: http://www.fonality.com/pop.cgi?page=pop_pbxtray.tt (PBXtray) It looks like Fonality has managed to make an app that does screen pops and allows click to dial. Has anyone else been able to get this all to work successfully? Looks pretty slick.

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn?t work: exten => _0.,1,SetCallerID,526910 exten => _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI> -- Executing SetCallerID("SIP/226-ada0", "526910") in new stack -- Executing Dial("SIP/226-ada0",

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

Just got a headset for testing asterisk and am using X-Lite. I plugged in the headset into the headset jack and is there any way to configure X-lite to use the headset instead of the speakers? Or will I have to plug the headset in the speaker jack ? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I can't make outgoing calls via Broadvoice. I have tried each and every configuration that was posted to list previously. I am able to receive incoming calls fine. I get the following in asterisk console: ===================================================== asterisk*CLI> show version Asterisk CVS-HEAD-03/10/05-22:51:28 built by vicky@asterisk on a i686 running Linux