similar to: Polycom boot server problem

Hi Noah - > I got everything to load via ftp. The phone appears to correctly boot > from the config files. I also put the latest firmware there and the > phone sucessfully loaded it. > > For some reason, the phone and * don't see each other. This is the > part > that confuses me. Any clues as to why the phone won't register? It's not often I get to

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns

Does anyone have the polycom soundpoint ip's successfully remotely provisioning? I've got the phone pulling default configs, and it's downloading phone specific information, but it's not actually using that information. Any help would be appreciated :) -- Aaron Daniel Computer Systems Technician Sam Houston State University amdtech@shsu.edu (936) 294-4198

From what I know this log show everything working Perfect. Then it goes to the Welcome screen then after a long time of processing, it errors out with a 0x10000 error Any Ideas? 1005195711|so |4|00|---------- Initial log entry ---------- 1005195711|so |4|00|+++ Note that bootrom log times are in GMT +++ 1005195711|hw |4|00|Initial log entry. 1005195711|wdog |4|00|Initial log entry

Thanks, I was afraid to try and change gains that I didn't know what they did simply because I don't want to blow a speaker or something.. :) I'll try it today. The only thing I haven't figured out is how to set a default ringer in the configuration file, set my time to EST w/ Daylight Savings and when receiving incoming calls if it's possible to see NAME & NUMBER instead

If that was possible, that would make my life easier as well :) -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Michael Graves Sent: Tuesday, August 31, 2004 10:12 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Polycom SoundPoint... Gains - Whichis for speakerphone

John, By chance do you know how to set a default ringer? What I have done is the following: <DEFAULT se.rt.1.name="Default" se.rt.1.type="ring" se.rt.1.ringer="7" se.rt.1.callWait="6" se.rt.1.mod="1"/> As you can see, I want 7 to be the default ringer for line 1... For some reason, it doesn't take these changes.

I am getting to my wits end with these phones (and so is my boss). I am getting an random echo on these phones and I have an issue opened with Polycom and its been in their research and development department for almost a month with no results. I have noticed that I get a message "RFC3389 support incomplete. Turn off on client if possible" in asterisk. I have researched this and made

Has anyone got this to work? Under Idle Display Animation, the administrators guide says "For example, a company logo could be displayed".. In the ipmid.cfg file, I enabled 'ind.idleDisplay.enabled' (ie changed it to 1), and under the IP 500 section, I added an entry for the bitmap that I want to display: bitmap.IP_500.66.name ="arf" but from there I'm not sure

Hi, Has anyone here reprogrammed their Polycom features keys using sip/ipmid.cfg? If so I would be really grateful if someone could send me an example as I have tried various entries for hours now and don't seem to be getting anywhere. Any help appreciated. Kind regards Jamie Heckford Technical Consultant

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

I'm trying to reconfigure my IP300 softkeys.. Currently when on a call, I have to hit more and then transfer.. I'd like make transfer appear on the first screen. Right now there's hold on there.. and hold is kind of redundant, since the IP300 has a "hard" hold button. I tried doing it in the <keys/> section of ipmid.cfg, but it doesn't seem to work.. anyone done

Hello - I have 8 polycom 501s all setup great using ulaw. We have put them through a pretty rigorous torture over the last 4 months, and they've performed famously. No dropped calls ever. We invested in some g729 licenses. changed my ipmid.cfg so that g729 is priority 1 and ulaw is priority 2. I added allow=g729 to my extension's sip.conf entry, where existed before disallow=all

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

I need to find a way to have the Polycom phones automatically park calls. Right now my users hit #70# (I know the last # is optional but it speeds it up.) to park a call. Personally I think this is easy, but my users would like one button to do this for them. The Polycom has buttons we don't need (Transfer & Services), it would be nice if I could remap one of those buttons to dial

(new asterisk user - currently setting up Polycom IP600 phones) Does anyone know if it's possible to make a sip phone instantly pick up on speakerphone when a particular call comes in? Eg so that you can quickly bother someone across the office without making them reach for their phone?