similar to: flashing zap using macro

I recently purchased a TDM11B so I could hopefully hook flash the FXO from either the FXS (on the TDM11B) or a SIP device. From the FXS, I've tried hitting # then transferring to an extension that flashes the line then dials the FXS again (3020). This seems to send me to a busy signal and the console tells me no such host of 3020 (the number I'm on). The call on call waiting gets sent

hello, if i start a transient guest doamin via "virsh create abcd.xml" i see an additional libvirt thread and also some open files: pstree -h `pgrep libvirtd` libvirtd───11*[{libvirtd}] libvirtd 3016 root 21w REG 253,0 6044 1052094 /var/log/libvirt/libxl/abcd.log libvirtd 3016 root 22r FIFO 0,8 0t0 126124 pipe libvirtd 3016 root

I recently upgraded from Asterisk 13.19 to 16.6.1. Everything is working fine with a few minor tweaks except outgoinf fax. Incoming works fine. I do outgoing faxing through an AMI call. Here is the output from the security log: [Nov 27 06:16:05] SECURITY[101222] res_security_log.c:

I have done additional testing and I haven't been able to figure out why it's failing. Since my original testing we now set the realm on the authentication section to match what we receive from NEC. It's of the format abc at xyz.com I have verified the md5_cred several times and it matches the user:realm:password formula 3016:insiph at something0a646666.com:3016 where username is

On 12/2/19 11:52 AM, Joshua C. Colp wrote: > So I know that AMI is listening and I can talk to it.  Here is the > main log" > > [Nov 27 06:16:00] VERBOSE[101155] asterisk.c: Remote UNIX connection > [Nov 27 06:16:00] VERBOSE[101245] asterisk.c: Remote UNIX connection > disconnected > [Nov 27 06:16:01] VERBOSE[101244] manager.c: Manager

I have this in my sip.conf: exten => *98,1,Verbose(0,CALLERID number is "${CALLERID(num)}") same => n,VoicemailMain(${CALLERID(num)}@LocalSets,s) same => n,Hangup However, my extensions are set up so that they always show the external number, not the extension: [foobar2](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxxxxx callerid=Candace <5555551212>

Hi, my data consists of 2 columns: one with the 'year' when daily observation was recorded, the other one consists these observations 'obs', like the following: year obs [3014,] 86 26.01 [3015,] 86 25.66 [3016,] 86 23.92 [3017,] 86 23.84 . . [3018,] 96 22.65 [3019,] 96 23.22 [3020,] 96 23.36 . . [3021,] 97 24.55 [3022,] 97 27.63 [3023,] 97 27.92 [3024,] 97

Having trouble configuring nut 2.7.4 on Fedora 25, with a new Tripp Lite UPS. I'm running XFCE, and XFCE's Power Manager sees the UPS just fine. lsusb gives: Bus 006 Device 002: ID 09ae:3016 Tripp Lite nut-scanner -U has no issues either: # nut-scanner -U Scanning USB bus. [nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "09AE" productid =

Hi all, I have problem for receiving fax from multiple page fax that sent from fax machine (analog). The error is : WARNING T.30 Page did not end cleanly This is my dialplan [inboundfax] exten => s,1,NoOp(**** FAX RECEIVED from ${CALLERID(num)} ${STRFTIME(${EPOCH},,%c)} ****) exten => s,n,Set(FAXOPT(ecm)=yes) exten =>

Hi I've just started to play around with AGI scripts and have run into problems. When I run Asterisk in console mode everything works just fine. If I run Asterisk in 'regular' mode (not console) it crashes if I hang up on the script. I have used Python scripts to test this and also the "agi-test.agi" script. (the Asterisk code was compiled from CVS code just a few days

Well where do I start...I have a domU (ubuntu) booting and appears well but I don''t have an eth0 listed at all, dom) looks good. DomU: eth0 Link encap:Ethernet HWaddr 00:06:5B:15:C5:0B inet addr:10.99.99.5 Bcast:10.99.99.7 Mask:255.255.255.248 inet6 addr: fe80::206:5bff:fe15:c50b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Hi, I'm trying to find, & set up a compatable driver for a Tripp-Lite OMNI1500LCDT ups. Not having any luck with tripplite_usb, or usbhid-ups. Running nut 2.6.2-1 on Fedora 14. Installed from package. Suggestions? Dick Lawson [root at Muleyputer ~]# upsdrvctl start Network UPS Tools - UPS driver controller 2.6.2 Network UPS Tools - Generic HID driver 0.35 (2.6.2) USB

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

Hi List, I have some severe problem with Samba 3 with ldapsam backend on debian stable. The problem is that I can not change the rights of a file or directory on the server from Windows. I get this in smb.log: ---cut--- [2004/03/14 21:59:09, 0] smbd/posix_acls.c:create_canon_ace_lists(1380) create_canon_ace_lists: unable to map SID S-1-5-21-2443489570-4015384086-1858331161-3009 to uid or gid.

I am currently running FreeNAS-8.3.1-RELEASE-x64 (r13452) using the packaged version of NUT, 2.6.5, using the usbhid-ups (Generic HID driver 0.37). Here is the output of "/usr/local/libexec/nut/usbhid-ups -D -D -D -D -D -D -a tripplite": Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 send_to_all: SETINFO driver.parameter.port

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. System: Ubuntu 14.04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS,

Hi Users, I'm planing to implement call completion feature in asterisk 1.8 but having some issue. I am following this document https://wiki.asterisk.org/wiki/display/AST/Generic+Call+Completion+Example I am getting error non-zero error on console. I am using softphone x-lite root at tux:/etc/asterisk# asterisk -r Verbosity is at least 3 == Using SIP RTP CoS mark 5 -- Executing [30 at

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12