Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut because nut_enable is NO. Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut_upsmon because nut_upsmon_enable is NO. Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut_upslog because nut_upslog_enable is NO. Dec 10 21:40:20 nas6 notifier: nut not running? (check /var/db/nut/upsd.pid). Dec 10 21:40:20 nas6 notifier: nut_upsmon not running? (check /var/db/nut/upsmon.pid). Dec 10 21:40:20 nas6 notifier: nut_upslog not running? (check /var/db/nut/upslog.pid). Dec 10 21:40:21 nas6 notifier: nut not running? (check /var/db/nut/upsd.pid). Dec 10 21:40:21 nas6 notifier: This TrippLite? device (09ae:3016) is not (or perhaps not yet) supported Dec 10 21:40:21 nas6 notifier: by usbhid-ups. Please make sure you have an up-to-date version of NUT. If Dec 10 21:40:21 nas6 notifier: this does not fix the problem, try running the driver with the Dec 10 21:40:21 nas6 notifier: '-x productid=3016' option. Please report your results to the NUT user's Dec 10 21:40:21 nas6 notifier: mailing list <nut-upsuser@?>. Dec 10 21:40:21 nas6 notifier: Dec 10 21:40:21 nas6 notifier: Network UPS Tools - Generic HID driver 0.37 (2.6.5) Dec 10 21:40:21 nas6 notifier: USB communication driver 0.31 Dec 10 21:40:21 nas6 notifier: No matching HID UPS found Dec 10 21:40:21 nas6 notifier: Driver failed to start (exit status=1) Dec 10 21:40:21 nas6 notifier: Network UPS Tools - UPS driver controller 2.6.5 Dec 10 21:40:21 nas6 root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut Dec 10 21:40:21 nas6 notifier: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut Dec 10 21:40:21 nas6 notifier: nut_upsmon not running? (check /var/db/nut/upsmon.pid). Dec 10 21:40:21 nas6 notifier: Starting nut_upsmon. Dec 10 21:40:21 nas6 notifier: kill: No such process Dec 10 21:40:21 nas6 notifier: UPS: UPS1 (master) (power value 1) Dec 10 21:40:21 nas6 upsmon[39737]: UPS [UPS1]: connect failed: Connection failure: Connection refused Dec 10 21:40:21 nas6 upsmon[39737]: Communications with UPS UPS1 lost Dec 10 21:40:21 nas6 notifier: nut_upslog not running? (check /var/db/nut/upslog.pid). Dec 10 21:40:21 nas6 notifier: Starting nut_upslog. Dec 10 21:40:21 nas6 notifier: Warning: initial connect failed: Connection failure: Connection refused Dec 10 21:40:21 nas6 notifier: Stopping nut_upslog. Dec 10 21:40:21 nas6 notifier: Stopping nut_upsmon. Dec 10 21:40:21 nas6 upsmon[39736]: upsmon parent: read Dec 10 21:40:21 nas6 notifier: nut not running? (check /var/db/nut/upsd.pid). According to latest HCL for NUT, the TrippLite? SmartUPS 1500 is supported: http://www.networkupstools.org/stable-hcl.html Not sure where the reference the "09ae:3016" model type is coming from. Many thanks in advance for pointers :-) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121211/0162687a/attachment.html>
2012/12/11 Steve Salier <steve.salier at gmail.com>> > Greetings all, >Hi Steve,> Anyone have a clue on this behavior (see below) on this behavior with > FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version > is 2.6.5 > > Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) > > I get the following: > > Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, > rev 1.10/0.02, addr 2> on usbus1 > Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut because nut_enable > is NO. > Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut_upsmon because > nut_upsmon_enable is NO. > Dec 10 21:40:12 nas6 notifier: Will not 'restart' nut_upslog because > nut_upslog_enable is NO. > Dec 10 21:40:20 nas6 notifier: nut not running? (check > /var/db/nut/upsd.pid). > Dec 10 21:40:20 nas6 notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Dec 10 21:40:20 nas6 notifier: nut_upslog not running? (check > /var/db/nut/upslog.pid). > Dec 10 21:40:21 nas6 notifier: nut not running? (check > /var/db/nut/upsd.pid). > Dec 10 21:40:21 nas6 notifier: This TrippLite? device (09ae:3016) is not > (or perhaps not yet) supported > Dec 10 21:40:21 nas6 notifier: by usbhid-ups. Please make sure you have an > up-to-date version of NUT. If > Dec 10 21:40:21 nas6 notifier: this does not fix the problem, try running > the driver with the > Dec 10 21:40:21 nas6 notifier: '-x productid=3016' option. Please report > your results to the NUT user's > Dec 10 21:40:21 nas6 notifier: mailing list <nut-upsuser@?>. > Dec 10 21:40:21 nas6 notifier: > Dec 10 21:40:21 nas6 notifier: Network UPS Tools - Generic HID driver 0.37 > (2.6.5) > Dec 10 21:40:21 nas6 notifier: USB communication driver 0.31 > Dec 10 21:40:21 nas6 notifier: No matching HID UPS found > Dec 10 21:40:21 nas6 notifier: Driver failed to start (exit status=1) > Dec 10 21:40:21 nas6 notifier: Network UPS Tools - UPS driver controller > 2.6.5 > Dec 10 21:40:21 nas6 root: /usr/local/etc/rc.d/nut: WARNING: failed precmd > routine for nut > Dec 10 21:40:21 nas6 notifier: /usr/local/etc/rc.d/nut: WARNING: failed > precmd routine for nut > Dec 10 21:40:21 nas6 notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Dec 10 21:40:21 nas6 notifier: Starting nut_upsmon. > Dec 10 21:40:21 nas6 notifier: kill: No such process > Dec 10 21:40:21 nas6 notifier: UPS: UPS1 (master) (power value 1) > Dec 10 21:40:21 nas6 upsmon[39737]: UPS [UPS1]: connect failed: Connection > failure: Connection refused > Dec 10 21:40:21 nas6 upsmon[39737]: Communications with UPS UPS1 lost > Dec 10 21:40:21 nas6 notifier: nut_upslog not running? (check > /var/db/nut/upslog.pid). > Dec 10 21:40:21 nas6 notifier: Starting nut_upslog. > Dec 10 21:40:21 nas6 notifier: Warning: initial connect failed: Connection > failure: Connection refused > Dec 10 21:40:21 nas6 notifier: Stopping nut_upslog. > Dec 10 21:40:21 nas6 notifier: Stopping nut_upsmon. > Dec 10 21:40:21 nas6 upsmon[39736]: upsmon parent: read > Dec 10 21:40:21 nas6 notifier: nut not running? (check > /var/db/nut/upsd.pid). > > According to latest HCL for NUT, the TrippLite? SmartUPS 1500 is supported: > http://www.networkupstools.org/stable-hcl.html > > > Not sure where the reference the "09ae:3016" model type is coming from. >these are the USB Vendor and Product IDs, that permits usbhid-ups to find supported devices. in the present case, this specific product ID 3016 is not currently part of our list. we can add it, but the first thing to do is to try if it works ;) as mentioned in the above log, just add "-x productid=3016" or add "productid=3016" in ups.conf, after the "port = auto" line. please report back if everything works, so that we can add this to usbhid-ups. cheers, Arnaud -- NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121211/04b28ae6/attachment-0001.html>
2012/12/13 Steve Salier <steve.salier at gmail.com>> Arnaud,Hi Steve, Many thanks - I modified the conf file as you indicated - which seems to> have solved the issue. Does this look ok? > > Dec 12 18:47:31 nas6 notifier: Network UPS Tools - Generic HID driver > 0.37 (2.6.5) > > Dec 12 18:47:31 nas6 notifier: USB communication driver 0.31 > > Dec 12 18:47:32 nas6 notifier: Network UPS Tools - UPS driver controller > 2.6.5 > > Dec 12 18:47:32 nas6 notifier: Starting nut. > > Dec 12 18:47:32 nas6 notifier: fopen /var/db/nut/upsd.pid: No such file > or directory > > Dec 12 18:47:32 nas6 notifier: listening on 127.0.0.1 port 3493 > > Dec 12 18:47:32 nas6 notifier: Connected to UPS [ups]: usbhid-ups-ups > > Dec 12 18:47:32 nas6 notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > > Dec 12 18:47:32 nas6 notifier: Starting nut_upsmon. > > Dec 12 18:47:32 nas6 notifier: kill: No such process > > Dec 12 18:47:32 nas6 notifier: UPS: ups (master) (power value 1) > > Dec 12 18:47:32 nas6 notifier: nut_upslog not running? (check > /var/db/nut/upslog.pid). > > Dec 12 18:47:32 nas6 notifier: Starting nut_upslog. >it's indeed working! I've thus added this ProductID 0x3016 to usbhid-ups (commit r3827) Merci!>welcome. thanks for your report! Arnaud -- NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121213/e83c291b/attachment.html>